The cool silver Subaru WRX (2003)

These Subaru’s are great little cars get the right one and you could be hitting 150 mph with problem at all, apart from the cops with speed guns but that is just an occupational hazard. Anyway, by all accounts this car from the images does look like anything has been done to it. Sure, there are the odd cosmetic touches here and there, but to the average man or woman in the street this is simply a Subaru WRX from 2003.

 edgar01

Yet under the hood there are a few surprises like the IHI VF39 Turbo, STi Top Mount Intercooler, DeatschWerks 565cc Injectors and Walbro 255LPH Fuel Pump, it that does not get you going then I am afraid that nothing is likely to get you going. We like cars like this one, a wolf in sheep’s clothing is probably the most appropriate words that we could put to this car, do not be fooled by what you first see, this car means business.  

 edgar03

Specs of Edgar Gamboa’s 2003 Subaru WRX

Engine Modification

IHI VF39 Turbo

STi Top Mount Intercooler

DeatschWerks 565cc Injectors

Walbro 255LPH Fuel Pump

Perrin Up-Pipe

Perrin Catless Downpipe

Espelir JGT 500 Catback Exhaust

K&N Typhoon Short Ram Intake

SPT Oil Filler Cap

SPT Battery Tie Down

Kartboy Exhaust Hangersv

Engine Management

Cobb Accessport Protuned

Drivetrain Modification

STi Version 6 RA Gearset

Exedy Stage 1 Racing Clutch

B&M Short Shifter

Suspension

Tanabe DF210 Lowering Springs

KYB AGX Adjustable Gas Shocks

Tein Front Strut Bar

Tein Rear Strut Bar

Wheels, Tires, Brakes

JDM Racing Hart CP-F Tune R Wheels 18×8.5 +38

Falken Ziex ZE-512 225/40ZR18 Tires

Muteki Blue Closed End Lugnuts

Rotora 4 piston Metallic Blue front calipers

Rotora 13″ cross drilled/slotted front rotors

Rotora stainless steel-braided brake lines

Rotora street performance pads

ATE Super Blue Racing Brake Fluid

Exterior

JDM STi HID Projector Headlights

JDM STi Version 2 Front Lip

JDM STi Version 7 Hood Scoop

JDM STi Version 7 Front Grill

JDM STi Version 7 Solid Fog Covers

JDM STi Carbon Fiber Sidemarkers

STi Version 8 Spoiler

OEM WRX Painted Sideskirts

JDM Subaru Rainguards

JDM Subaru Front Aeroguards

JDM Subaru Rear Aeroguards

JDM WRX Pink Rear Badge

JUN Eyelids

Seibon Carbon Fiber Wingless Trunk

Interior

JDM STi 5 Speed Black Shift Knob

HKS Type 1 Turbo Timer

Escort Passport X50 Radar Detector

Lamco Boost Gauge

Source [Carbon8 Mag]

 51lmhc1ghal__ss500_

APR Front Carbon Wind Splitter Subaru WRX STI 04-05

Product Description

APR Front Carbon Wind Splitter Subaru WRX/STI 04-05 A Wind Splitters is a protruding flat surface in the front of a car that is designed to decrease front end lift and exert downforce. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

Features:

- Carbon Fiber Reinforcement – All APR Front Wind Splitters are reinforced with sheets of carbon fiber.

- Fully Functional Undertray – Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.

- Support Rods Included – Supporting every APR Front Wind Splitters are stainless steel Support Rods.

This product ships with a flat rate of $65-$75. Please call for shipping quote.

Priced at $288.99

Source [Amazon]

 51-x10tplxl__ss500_

TC SPORTLINE 02-06 SUBARU IMPREZA WRX TURBO BURNOUT CATBACK EXHAUST 3.0″ (FC19)

Product Features

INCREASE IN PERFORMANCE, 100% GRADE A STAINLESS STEEL MATERIAL CONSTRUCTION

O.E. REPLACEMENT, BOLT-ON INSTALLATION, SPECIAL DESIGNED HANGERS TO PREVENT SLIPPAGE

SPECIFIC PIPING DIAMETER SELECTED TO MATCH EACH VEHICLE’S PERFORMANCE LEVEL, COMPACT MUFFLER DESIGN FOR REDUCING WEIGHT

SPECIAL SOUND DAMPENING MATERIALS TO REDUCE NOISE AND PRODUCE DEEP THROATY NOTE WITH REMOVABLE SLIENCER

4.0″ ZEN STYLE EXHAUST TIP FOR SPORTY APPEARANCE, 3.0″ PIPING FOR INCREASED EXHAUST FLOW

Product Description

Burnout series exhaust systems consist of many catback and axle back systems for various import and domestic sports compact vehicles. Designed to be O.E. replacements, each system bolts onto the original mounting locations with uniquely designed hangers that prevent slippage. With 3.0″ catback piping, it allows for increased exhaust flow throughout the RPM range without losing too much back pressure at lower RPM. Sporty Zen style muffler features compact canister with 4.0″ muffler tip. Special sound dampening materials inside the muffler canister facilitate deep and low throaty exhaust tone and increase low end torque for street use. Made of 100% grade A stainless steel material, the burnout exhaust systems are not only attractive in appearance but they also have high durability.

Priced at $159.20

Source [Amazon]

 

 

Also see interesting tags: , , , , , ,
Share


Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>