This car has been named the Juice Z and the design certainly squeezes the appetite for more. Like the doors, you would not expect to have just any old door on this car would you? The car has been fitted with a lambo vertical door kit and boy does that look cool.

Having fitted a Vortech Supercharger and Intercooler under the hood, you would be expecting some serious power from old 350Z and you would be in luck with this car because it is touching around 422 rwp. However, you would not expect anything else considering that Jeremy from forgedperformance.com.

To finish the car off a Do-Luck AeroWivern body kit and a Kamanari rear wing complete the visual and aero package for the car, then in order to make the car stand out from crowd it has been painted with a terrific Le Mans Sunset Orange with Magnetic Black paint seals to tidy up the edges.

SPECS Exterior – VERTICAL DOORS Lambo Door Kit, DO-LUCK AeroWivern Body Kit w/ Rear Carbon Diffuser, KAMANARI Rear Wing, AUT DESIGN , Eyelines, Custom Front Fender Air Ducts, Custom Two-Tone Paint- Le Mans Sunset/Magnetic Black, Brake & Battery Covers, Painted Le Mans Sunset, NISSAN 2006 LED tail lights, Shaved Emblems, Antenna & Rear Wiper, 20% Tint

Wheels/Tires – MAYA STM 20X9 & 20X10.5, MICHELIN Pilot Sport 2, 255/30/20 & 285/30/20

Engine – VORTECH Polished Supercharger with 3.125 Pulley, VORTECH Intercooler Powder Coated Red with Red Silicon Hoses, KINETIX SSV Intake Manifold with Polished Throttle Body, UNORTHODOX RACING Pulley Set, SAMCO Red Silicon Hoses, PI-THON Polished Compression Hose Locks, PI-THON Polished Aluminium Caps for Power Steering, Windshield Washer & Coolant Overflow, Z-ENTERPRISES Polished Bolt Kit, NISMO Power Steering Cooler, NISMO Oil Cap & Radiator Cap, MAX Grounding Kit in Silver Mylar, NISSAN JDM Horns, UNDERTHEHOOD, INC. Plexiglas Mirrors, DC SPORTS Stainless Steel Headers, CRAWFORD Hi-Flow Cats STILLEN Dual Exhaust

Interior – INNOVATE MOTORSPORTS Wideband A-Pillar Gauge, DEFI Boost A-Pillar Gauge, eDASHKIT Aluminium Dash Kit, NISSAN Aluminium Kick Plates Painted Le Mans Sunset, Strut Bar Cover Painted Le Mans Sunset

ICE – COLORSTORM LED Lighting System Exterior, Engine, & Interior, UNLIMITED TUNING Chrome & LED Lighted Strut Tower & Kick Plates, ESCORT Laser Shifter ZR3, ESCORT Passport 8500 Radar Detector, OPTIMA Yellow Top Battery, ALPINE IVA-W200 2-din Head Unit, ALPINE TUA-T020 XM Receiver, MB QUART RCE 216 6.5″ Component Separates Fronts, MB QUART DKE 116 6.5″ Coaxials Rears, JL AUDIO 10w6v2 Subwoofer,JL AUDIO 500/1 Amplifier, JL AUDIO 300/4 Amplifier, AVELECTRONIC Navigation Video Switcher System with TV Tuner, XBOX 360, Custom Fibreglass Subwoofer Box, Custom Metal Amp Rack, Custom Plexiglas Amplifier Cover with “350Z” Cut Out

Special Thanks:

350ZFRENZY.com

TeamECI – www.teameci.com

Vertical Doors – www.verticaldoors.com/

Colorstorm – www.colorstormsystem.com

The Powder Coater – www.thepowdercoater.com

Forged Performance – www.forgedperformance.com

Sakari Graphics – www.sakarigraphics.com

Source [Tunerzine]

Nissan 350Z 2006 -2008 Dash Trim Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in Radical Red.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

Thin, self-adhesive, vinyl film with a Radical Red finish. 

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a 3 mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Nissan 350Z DuPont Tyvek PopTop Sun Shade, Interior, Cockpit, Car Cover. For Both Coupe and Convertible Models__SEMA SHOW NEW PRODUCT AWARD WINNER

Product Features

SEMA Show NEW PRODUCT AWARD WINNER____Covers All Windows____Install or Remove in Less Than a Minute

Virtually Eliminates Solar Heat Build-Up____Blocks 99.8% of the Sun’s UV Rays____ Custom Fit

Water Resistant Yet Breathable____Super Strong, Lightweight Material by DuPont____Anti-Theft Feature

Built-in Storage Pocket____Extremely Small Storage Package____Use with Convertible Top UP or DOWN

Great for keeping over night DEW, FROST and SNOW off your windows during those non-summer months

Product Description

More protection than a sun shade, less hassle than a car cover. Protect your vehicle when Parked at WORK, at HOME, the MALL, the AIRPORT, or anywhere under the Sun. The California PopTop is an Innovative Sun Shading Product that covers all the windows of your vehicle. It keeps your interior near the same temperature as the outside air—even if your vehicle has been baking in the sun all day! It’s as if you parked in a garage! It’s also ideal for keeping overnight dew, frost and snow off your windows during those non-summer months. The California PopTop has a patented fastening system that firmly attaches the PopTop to the vehicle without using a series of 6 to 8 straps and hooks. It is ergonomically designed for ease of use.

Priced at $49.95

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The 750 HP Nissan 350Z (0)
• Smart looking Nissan 350Z (0)

Apart from that, this is a car ripe for modification. It has the body and style that lends itself to being just slightly altered with nip and tuck here and there. Under the hood is where most of the action is going to take place with plenty of a work and money spent on turning this not too bad engine into a beast.

The car is finished off in a high gloss black; with a few touches of gold paintwork add to the light effect on this car. It seems that black is a hard colour to use on a car because it shows up every little mark, scuff and speck of dirt. However, in the right hands this high gloss finish is a testament to the work and time that has gone into this car.

Engine Modification

Fujita Cold Air Intake

Vibrant cat-back exhaust

Mugen Reservoir Covers

Painted gold spark plug and fuse cover

DC sports oil cap

Drive train Modification

Comptech Short Shifter

Suspension

Cusco 3pt Strut bar (from Japan)

TEIN s-tech springs

Tokico Shocks

Wheels, Tires, Brakes

17″ Konig Toxxin’s Powder coated ’sahara gold’

Federal Tires 215/45/r17

EBC green stuff pads

EBC cross drilled slotted rotors

Exterior

Mugen Lip Kit

Mugen Wing

SEIBON OEM Carbon Fibre Hood

Custom Carbon Fibre Side rear diffuser

Ignited 6000k HID kit

Tinted Taillights

JDM Mugen emblems

JDM OEM i-vtec emblem

20% tint

Painted Grill (not chrome anymore)

Shinzo Werkz TEIN style Graphics

Shinzo Werkz / Battle Endless – Carbon Fibre b-pillars

Decals by Shinzo Werkz

Interior

Bride lo max Racing seats

Custom Super low brackets

Skunk2 Type R 20th Anniversary Shift knob

Mugen Floor mats

Mugen Door Sills

TomTom portable 4″ GPS

Autometer Gauge Air/Fuel Ratio

Autometer Gauge Volt Meter

Autometer Gauge Oil Pressure

I.C.E.

2 10″ Pioneer Premier Subwoofers

JL Audio 300 Watt Amp

Sponsors

Vibrant Performance

Car Sponsorships

Source [Carbon8 Mag]

TC SPORTLINE 06-08 HONDA CIVIC EX 2/4DR BURNOUT 2 CATBACK EXHAUST 2.5″ (1-EX-HDCV062E-A20)

Product Features

INCREASE IN PERFORMANCE, 100% GRADE A STAINLESS STEEL MATERIAL CONSTRUCTION

O.E. REPLACEMENT, BOLT-ON INSTALLATION, SPECIAL DESIGNED HANGERS TO PREVENT SLIPPAGE

SPECIFIC PIPING DIAMETER SELECTED TO MATCH EACH VEHICLE’S PERFORMANCE LEVEL, COMPACT MUFFLER DESIGN FOR REDUCING WEIGHT

SPECIAL SOUND DAMPENING MATERIALS TO REDUCE NOISE AND PRODUCE DEEP THROATY NOTE WITH REMOVABLE SLIENCER

4.0″ ZEN STYLE EXHAUST TIP FOR SPORTY APPEARANCE, 2.5″ PIPING FOR INCREASED EXHAUST FLOW

Product Description

Burnout series exhaust systems consist of many cat back and axle back systems for various imports and domestic sports compact vehicles. Designed to be O.E. replacements, each system bolts onto the original mounting locations with uniquely designed hangers that prevent slippage. With 2.5″ cat back piping, it allows for increased exhaust flow throughout the RPM range without losing too much back pressure at lower RPM. Sporty Zen style muffler features compact canister with 4.0″ muffler tip. Special sound dampening materials inside the muffler canister facilitate deep and low throaty exhaust tone and increase low end torque for street use. Made of 100% grade A stainless steel material, the burnout exhaust systems are not only attractive in appearance but they also have high durability.

Priced at $159.20

Source [Amazon]

GReddy Racing – Ti-C / Turbo Ti-C: Honda Civic EX 2001-05 #15809

Product Description

GReddy Racing Ti-C Cat-back Exhausts combine the design, looks and flow of our Full Racing Titanium systems with the durability, deep sound, value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction makes this the logical choice for both Race and Street Enthusiasts. The systems are comprised of a Titanium heat-treated tip, polished stainless steel muffler, unpolished stainless steel piping. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. *Most applications below 92db, with all under 94db. The large list of applications include 80mm piping for Turbo applications and 50-60-70mm for Normally Aspirated vehicles. (usually 60mm)

To compliment the GReddy Turbo Kit line, we also offer the Turbo Ti-C line. Turbo Ti-C cat-back exhaust systems feature larger piping diameters for more flow then the standard normally aspirated Racing Ti-C applications. (usually 70 or 80mm)

Priced at $776.25

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Honda Civic DX project (0)
• The 1990 Honda Civic of Eric Britton (0)
• Honda Civic, is it cool! (0)
• Honda Civic Si from 2000 (0)
• The cool old school Honda Civic Si (0)

This particular Nissan 350Z has had some extensive work done on it as you will be able to make out from the specs below but it still carries the shape of the original car and that is what matters to fans, who have not quite summoned up enough courage to go out and buy for themselves.

Whatever anyone thinks of the Nissan 350Z, they would have to take a second look at this car, and maybe if they close enough to it, take a little look inside to what is going on in there. At the end of the day some people say that this is just a Nissan, well that maybe so but I would take this one over a whole choice of other cars, so what would choose, the Nissan 350Z or ?

Specs of the Nissan 350Z

Engine Modification – Greddy Twin Turbo, Greddy type 23 intercooler, Rc 440 injectors, CJM stage 2 fuel return kit, Greddy type RS blow off valve, Greddy evo-tt exhaust, AAM 3” down pipes with open dumps, custom chromed upper plenum, cf brake fluid and battery covers, cf cooling plate, CF engine cover, nismo oil cap, nismo radiator cap.

Engine Management – Turbo XS utec with 4bar map switch, HKS EVC-6 boost controller, Blitz turbo timer.

Drive train Modification – ClutchNet aluminium flywheel, clutch net stg 5 clutch kit.

Suspension – Jic Coilovers, Jic CF front strut tower bar, Tanabe Sway bars front and rear, Spc camber adjusters, Spc toe bolts.

Wheels, Tires, Brakes – Racing Heart Cx 19×9+22 f 19X10 +22 R Falken tires 245-35-19F 285-35-19 R stoptech slotted rotors, Stopteh stainless lines, Axxis ult pads.

Exterior – Carbon Creations CF c-2 front bumper, Carbon Creations CF c-2 side skirts, Carbon Creations CF c-2 rear bumper, Seibon CF TS2 hood, Seibon CF hatch, Seibon CF front fenders (+10mm), Seibon CF doors, Seibon CF rear fenders (+30mm),Mastergrade Cf roof cap, Mastergrade Cf A pillars, Mastergrade Cf B pillars, Carbign craft CF mirror covers, Custom CF fuel door cover, Custom Blue pearl clear coat.

Interior – Evo-R CF dash kit, Evo-R leather Cf shift boot, Evo-R shift knob, Bride Gias Carbon kevlar seats, Schroth harnesses, kirk racing 4pt roll bar,nismo floor mats, automeeter 3 gauge pod, Defi Link, Defi Imperial amber boost gauge, Defi Imperial fuel pressure gauge, Innovate wide band A/F ratio gauge.

I.C.E. – Alpine CDA-9855 headunit, alpine Spr 17 components front and rear, Alpine Mrp-m450 amplifier, Alpine Mrf-400 amlifier, 2 alpine type R 10” custom amprack, custom fiberglass subwoofer enclosure.

Sponsors – DonlysonAutomotive Concepts, Evo-R, ShowStoppers Usa, ShopJspec and Twin M autosounds

Numbers (WHP, 0 to 60 mph and etc.) – 463WHP@9psi 11.4@121 1/4 mile

Others – I would like to thank Francis Fabuiclan From DonlysonAutoconcepts, Chuck from Showstoppers Usa, Joseph from ShopJspec.com, Jay from EVO-R, Mike from twin M auto sounds

Source [Carbon8 Mag]

FK88395 – VFiber FRP Nissan 350Z 03-08 HB Skyline Inspired 6pc Body Kit

Product Features

Nissan 350Z 03-08 HB

Genuine VFiber(TM) signature line aerodynamic product

True FRP (Fibre-Reinforced-Plastic) material: Strong, durable and cost effective

Removable diamond-cut mesh grilles preinstalled (if applicable)

Hardware pack and installation instructions included

Product Description

Vision Autodynamics is proud to introduce the VFiber(TM) line of products, which include carbon fibre fibreglass as well as poly-urethane aerodynamic parts. All VFiber(TM) products are crafted with pinpoint precision, diligent care and top quality materials along with strict quality control standards to ensure products unparalleled by the competition. To show our confidence in the VFiber(TM) product line, we are offering a 100% Money Back Guarantee on all VFiber(TM) Products. Combined shipping may be applied, please call us at Toll Free 877-4-AEROKIT (877-423-7654) or visit our 24hr online catalogue and one of our sales specialists will be happy to assist you.

Priced at $1,250

Source [Amazon]

Nissan 350Z 2006 -2008 Dash Trim Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in Radical Red.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

Thin, self-adhesive, vinyl film with a Radical Red finish.

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a 3 mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• Smart looking Nissan 350Z (0)
• The spectacular Nissan 350Z (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)

Obviously being given the car from the makers is a good incentive, in fact it means that the job is even harder now, because not only is there fans and media to please there is the firm that made the car in the first place to look out for. Who ever said that import car builders always like to take the easy way out, in fact if anything they about thing the hard way and it is shows in the finished product.

Behind The Build

Name – Mike Ma

2008 Scion XD

Output – 350 whp @ 6,400 rpm; 280 lb-ft of torque @ 4,500 rpm

Engine – 3S-GTE conversion; JE pistons; custom Injen front-mount intercooler and plumbing; custom manifold, radiator, fans, hoses; custom DC Sports exhaust; Airwerks K24 turbocharger; GReddy RS blow-off valve; Microtec ECU; NGK plugs; 550cc RC Engineering fuel injectors; Aeromotive fuel pump, pressure regulator; ARC oil cap; DME Radiator cap

Drivetrain – JRX Performance axles; Fidanza Stage 3 clutch, aluminium flywheel

Suspension – KW Variant 3 coilovers; Oink Fabrications halo-style WRC-legal roll cage, full stitch-welding

Wheels/Tires – 19 x 8 +35 offset Enkei RPF1 wheels; 225/35-19 Toyo T1R tires (street); 18 x 8 +35mm Enkei RPF1 wheels; 235/35-18 Toyo R1R tires (track); Project Kics lug nuts

Brakes – JBT four-piston calipers, 13-inch rotors (front), JBT stainless steel lines

Exterior – Five Axis Design lip kit; Seibon carbon fiber hood; Nubi HID lighting; Magma Orange color change; K&R 3M graphics

Interior – Sparco EVO front seats; custom suede rear seats, dash, door panels, console; NRG steering wheel

Electronics – Motevo Mobile head unit; Memphis Car Audi S Class two-channel 300-watt amplifiers (x1), S Class single-channel 500-watt amplifier (x2), M Class 6.5-inch speakers (x2), M Class 12-inch subwoofers (x2), wiring; Adam Nonis custom enclosures, carbon door panels

Gratitude – Steven, Dave, and the crew at M2-Motoring; Juni and everyone at JRX Performance; my brother Tanner and everyone at Memphis Car Audio; Scion; Freddy and the family at Autofashion USA; Injen; Enkei wheels; JBT brakes; KW coilovers; Troy at 5Axis; Oink Fabrications for their badass fabwork; K&R digital graphics; Will Law and the guys at DC sports; Adam Nonis; KC at APR; Toyo Tires; and the one and only Carter-thank you for giving me the honor of having my Scion grace the pages of your magazine.

Source [Import Tuner]

Scion xD 2008 – 2009 Clear Headlight Protection Kit

Product Features

Clear Lite Protection film applies directly over your headlight and is optically clear.

“Rvinyl Non-protective tint film uses a transparent vinyl which is 3mil (.003″”)thick. These films a

This Rvinyl Headlight Protection Film kits are designed to protect your vehicle’s headlamps.

1 in 6 vehicles on the road will require headlight replacements-protect yours while you still can!

Clear Protection Film: 95% Light Transmission

Product Description

This Rvinyl Headlight Protection Film kits are designed to protect your vehicle’’s headlamps from road debris, weather elements, salt and UV discoloration. Headlamp Protection Film kits are pre-cut and model specific and made from a pliable urethane adhesive backed film. Rvinyl kits apply as easily as a decal, but are repositionable during the application process using a wet application method and conform to your vehicle’’s lights by using a heat source. If you have a hair dryer, you can install this product. Years of outdoor exposure degrade OEM lights, turn signals and fog lights. Scratches and UV radiation turn headlights yellow and milky-white over time, leading up to a 50% degradation in foot light candle output. Rvinyl headlight protection films prevents this and are non-protective tint film however does not provide a level of protection from significant scratches or UV radiation. 1 in 6 vehicles on the road will require headlight replacements. OEM composite lights cost in excess of $600.00 to replace. Rvinyl Protection kits may be removed with out damaging existing lights, increasing resale value and protecting leased vehicles. Rvinyl offers two types of clear protection film, a lite version designed to be installed by the average user and a professional version, which is five times thicker, and designed for professional installers. Both protect your headlights, but the processional version is specifically engineered for off-road use vehicles and race tracks.

Priced at $34.99

Source [Amazon]

XENON HID CONVERSION KIT Scion tC xB xD 9006 H11 6000K

Product Features

3x brighter than O.E.M

5x longer life (2500+ Hours)

FULL 90 days warranty no hassle

100% Plug and Play

2x Xenon bulbs, 2x digital ballast, 2x ballast holders & installation guide

Product Description

After payment, please inform us (by phone at (714) 636 – 0180 or email us info@hidonlinestore.com)  Your Bulb size & Color Temperature  Make & Model of your vehicle  Telephone number We ONLY accept return if item is still in original condition, unopen package NO Exception. Must give notice within 14days. S/H fees are NOT refundable. Please email or call us especially if you are an international buyer. At TJ Autosport we offer customers with quality Xenon HID Kit (single beam) at an affordable price. All kits are tested before shipping to customers. We have all size and color in stock. We specialize in wholesale and special discount price for bulk orders. All kits are covered with 90 days warranty by us, not the factory overseas. Can’t find your size? Please contact us for help.

Priced at $80

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Is this a cool Scion or what? (1)
• Cool looking Scion XA (0)
• A Serious Scion from 2004 (0)
• The wide body Scion xB of Mobil 1 (0)
• The Nissan 350Z ready for action (0)

Ordinarily the colour would not be top of the list for build, either as it is just too orange, but the longer that you at the car the better the body work looks. This is an orange machine that people like, if this colour was on a Neon or something similar the driver would be laughed at.

Naturally, this sort of job does not come cheap and it is fortunate that the owner has managed to get a nice amount of sponsors behind him, which is always going to help when you are planning to get a car to this sort of level.

Engine Modification

Sr20det

OEM S15 rods

ARP studs

Blitz FMIC

Buddy club Spec II exhaust

Cometic Head gasket

CP pistons

Greddy catch can

Greddy oil pan

Greddy downpipe

Greddy radiator cap

Greddy rocker arm stoppers

Greddy oil cap

HKS Super Sequential BOV

Ill garage dual 10 inch fans

Koyo radiator

Meagan racing turbo outlet

NGK spark plugs

Taka stainless steel braided turbo lines

Tpros exhaust manifold

Walbro fuel pump

Custom paint “Midnight black?valve cover

Custom 3 inch straight pipe

manual boost controller

Stainless steel braided clutch line

Slim battery

S15 Rods

polished crank

Suspension

Braided steel clutch line

D1 Project mu rear

Drift line 15mm spacers front

Drift line 5mm spacers rear

Drift line tension rods

Greddy front strut bar

Hawk plus pads front

Peak performance inner tie rod

Peak performance outer tie rod

Peak performance extended studs

Stance GR+ Pro

Slotted rotors

Tanabe front sway bar

Tanabe rear sway bar

Custom rear strut bar

Custom lower rear strut bar

Wheels, Tires, Brakes

Work Stitch Evolutions front 18×9 +16

Work Stitch Evolutions rear 18×10 +12

Federal SS-595 225/40/18

Exterior

Silvia conversion

OEM Silvia brick head lights

OEM Silvia corner lenses

A1 motorsports aero kit

A1 motorsports single vent front over fenders

DDrug Tsunami Silvia hood (only one in America, 1 of 2)

GTR Silvia grill

Origin Red/clear tails

S2000 rear antenna

Supermade rear wing

Custom JDM license plate holder

Interior

Air spencer JDM air freshener

Autometer pillar pod

Bride Brix II

Greddy shift knob

Greddy seat belt pads

Pioneer cd player

SPW boost gauge

SPW carbon fiber water temp gauge

SPW carbon fiber oil gauge

Sony carbon fiber speakers

Sparco flash 5 steering wheel

Sparco hub and quick release

Sparco 4 pt harness

Custom seat rail

Custom 4point roll cage

Custom Fur de leis interior panel print

Sponsors

Driftlineusa.com

Monkey in a dryer.com

A1-Motorsports.com

CItytireonline.com

Onetongarage.com

Illgarage.com

Jaded performance

and to my biggest sponsor, Noah Sailer for always helping out with everything I need!

Numbers

Est. horsepower 250-280

Est. quarter mile 12.8 seconds

Source [Carbon8 Mag]

Secret Weapon Intake (Nissan | 240SX | 91-94)

Product Description

The air filter can be totally taken apart and cleaned. The foam is denser and more thicker than the Dragon filter.

The velocity stank inside the air filter is a TRUE VELOCITY STACK. The Air filter has Ram Air capability, by hooking up the hose to the top of the air filter.

The intake has another Air Passage way inside the intake pipe to create a Air Fusion, imagine 2 different pathways of air inside the intake pipe, one air traveling in pathway #1 going 2 x faster than pathway #2. When the two different pathways of airflow meet at the end of the pipe they create a fusion effect which enhances the AIR SPEED of the by 3 times.

The Secret Weapon Intake Systems is an result of countless hours of testing and tuning of air intake velocity, Airmass and Airspeed for each vehicle application. The Result, an intake system that performs better than any Cold Air Intake, but with a Short Ram. It is possible by Weapon*R’s Patent Pending Speed Velocity theory, By creating a higher airspeed in the intake path you increase airmass and airspeed, which greatly increase horsepower.

This is possible by Creating two different paths of airflow, both flowing at different airspeeds, due to the tubing diameter in which the air is traveling. Now when the two different paths of air meet, they create a vacuum, which is where the airspeed starts to multiply, forcing more air into the engine at a higher rate, creating more horsepower.

The Secret Weapon Intake Systems are carefully CNC mendrel bent out of 6061 Aluminium, and then Hand Tig Welded in sections to ensure a constant balance in airflow, regulation in airspeed, positive seal and proper fittment. Each one of these intake systems are carefully tuned, by matching the engines displacement, air intake capacity and airspeed to the intake systems tube size,length and secondary pathway tubing diameters to maximize the full potential of the SECRET WEAPON INTAKE SYSTEM.

Priced at $266.90

Source [Amazon]

89-94 NISSAN 240SX Sealed Beam Super High Intensity 1157 LED Signal Bulb – 12 Red LED Dial 1157 Light Bulb parking light light bulb upgrade 89-94 NISSAN 240SX Sealed Beam Super High Intensity 1157 LED Signal Bulb – 12 Red LED Dial 1157 Light Bulb parking light light bulb upgrade

Product Features

Low power consumption

Easy to install and fit for most import and domestic vehicles

High Intensity LEDs in each light bulb

Super ultra bright color bulb

Product Description

NISSAN 240SX Sealed Beam parking light light bulb upgrade 89-94 Super Bright RED 1157 LED light bulbs OEM light Bulb with Build in 12 super LED. Twist in bulb-Double filament. Manufactory part no: 1157, 3496, 2057, 1142, 12499, 12594, P21/5W — Newest bulb upgrades for your car, truck or SUV – Super High Intensity 1157 Super Ultra Bright LED, automotive LED Light, car replacement bulb. (Multi-LED wide light source-designed automotive LED replacement light bulb for car.)With all the new technology coming out for the new vehicles on the market, LED lighting is one of the most exciting innovations. Automotive LED light produces more intense light. LED light travels faster and farther then any ordinary automotive light. Consume at least 10 times less power then regular bulbs and have a much longer life spends, which means you can save more money. Our new line of automotive LED light bulbs gives you all the benefits of LED lighting, which you cant get from regular light bulbs. Plus, this super ultra bright LED features a super solid red colour, this LED replacement bulb is the coolest red light you can get for your car on the market. 1157 LED Replacement Bulb, Turn Signal Bulb Replacement – 12 Super Ultra Bright RED LED Dial 1157 Light Bulb Features: Low power consumption 12V 0.5W A fit for most import and domestic vehicles Twelve high Intensity LEDs in each bulb Super Ultra Bright Red Color to match the rear stop, rear signal or brake lights Fit Manufacture part No. 1157, 3496, 2057, 1142, 12499, 12594 This automotive LED light upgrade car light bulb is the best fit to replace factory bulbs for brake lights, rear tail lights, side marker lights, front signal lights, rear signal lights, and reverse back up lights. For some vehicles with fast signaling or LED burnout problems, install one of the LED Load Resistors to solve the LED-signaling problem. parking light light bulb upgrade For 240SX Sealed Beam

Priced at $12.95

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• A sunny Nissan 240SX (2)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)
• Smart looking Nissan 350Z (0)

This car has been built by Team Koshak and All Star, this was originally designed for the SEMA 2008 show, the most prominent thing about the car is the roof, or rather the lack of one. This is something really makes a car stand from the rest and the way that this has been done is for impact, which they have achieved.

The colour green features heavily on this car and even as you inside there is a splash of Samari Green greets you in the centre console. This colour is themed all around the car with touches of carefully placed paint to highlight the colour throughout the entire project.

SPECS Exterior:

Chopped top – made the car into a speedster / convertible: Chopped off the roof, a-b-c pillar from around the doors, rear deck lid and wing, Re-enforced the body with a custom 6pt Unique Fabrication roll cage

All metal bodywork (one off customization): Shaved door handles, Handmade steel side mirror mounts, One off all metal rear wing, One off all metal rear valance panel/boot, One off all metal rear logo panel with recessed emblem pocket, One off all metal rear panel lowered 1” lower then stock, Customized the window trim and a-pillar (slight curve for more aerodynamic look), Customized and capped off front and rear doors (no more side and rear windows), Capped off b-pillars, Capped off c-pillars, Custom front bumper grilles (4) powder coated black to match the roll cage, Customized fender wheels to accommodate 19×8.5” and 19×9.5” wheels

Accessories: Authentic C-west CF Mirrors sanded down, prepped, & painted green to match the body, Varad Vision under car lighting, 2008 Toyota IST front and rear emblems from Japan painted black to match the cage, Custom handmade fibreglass cowl panel (shaved wiper blade holes and shooters) painted black to match the cage

3-stage custom headlights and taillights: Headlights were taken apart and painted green to follow the bodylines, Headlights bezels equipped with Varad strobes lights, Headlights outfitted with latest version of the Ignited 8000k HID headlights (smaller lightweight ballasts), Taillights bezels equipped with Varad strobe lights

Prototype body kit (uniqueness of product and fit and finish): Prototype Extreme Dimension body kit designed by Jim Koshak, Prototype front bumper (corners refiberglassed for perfect fitment), Prototype side skirts, Prototype rear bumper (corners refiberglassed bumpers for perfect fitment (see photos)

Paint: Custom mixed PPG base coat and clear coat, Custom mixed PPG paint (Samari Green) applied by A&A Autoworks, Painted exterior, door jams, engine bay, wheel wells (black), trunk area, roll cage, interior pieces, grilles, springs, powder coated rotors, mirrors, emblems, and valve cover, Custom two-tone black and silver pin striping by world renowned pin stripper Jeff Styles

Engine: Modifications: Nitrous Express direct port system (50 shot) (carbon fibre solenoids and hard lined wiring, and steel braided lines), Custom Id-Tuning intake system (powder coated black) with individual port nitrous oxide injectors, Custom polished Autogear fuel rail, Custom Magnaflow exhaust system, Custom cold air intake with K&N filter, Custom K&N breather filter (with custom mounting bracket, powder coated black)

Accessories: Green colour matched valve cover, AEM oil cap, AEM battery box holder (powder coated black), NRG radiator cap, Wire tuck (please see photos), Allen-head bolts, Perrin silicone hoses, Kinetik Power batteries, Nitrous Express bottle opener

Uniqueness of Product and One-off Customization: Custom raised (4”) shock towers, Custom cowl, Custom Id-Tuning intake, Custom cold air intake, Custom breather intake, Custom NX set-up with hard lines and steel braided lines

Undercarriage: Paint and powder coat: Green colour matched TRD Springs (please see rear springs with mirrors), Black painted wheel wells, Black painted shocks, New wheel well fender trim, Powder coated Wilwood callipers

Suspension / Brakes: Suspension: Custom Unique Fabrication front suspension: 4” Raised Strut towers dropping the car by 4” (see photos under the engine bay), Custom Unique Fabrication rear suspension: Rear suspension lowered 4” with customized rear control arm and mounting brackets (see photos), TRD lowering springs painted green to match the car colour

Brakes: Front: Wilwood 4pistion callipers (powder coated silver), Steel braided brake lines, Autogear CNC custom 13” brake rotors and hats, Autogear allen head bolts, Custom Unique Fabrication mounting brackets for callipers

Rear: Removal of rear drums, Autogear CNC custom offset 13” 4 wheel disc brakes conversion with Wilwood callipers, Custom Unique Fabrication mounting brackets for callipers (see photos), Wilwood 2pistion callipers (powder coated silver), Steel braided brake lines, Custom e-brake set-up (e-brake works)

Wheels: Custom prototype 20-spoke 19×8.5” and 19×9.5” wheels, Painted gloss black faces, Painted gloss black inner and outer barrels, Custom green pin stripe on outer lips, Silver bolts, Custom made center caps, Centre cap pin striped with IST logo

Tires: Toyo Tires, 215/35/19 on a 19×8.5” wheel, 235/35/19 on a 19×9.5” wheel

Interior: Accessories: Varad Vision- lighting, Custom mounted Ignited Toggle and starter switches, Limited Edition Status Racing / Tjin Edition seats w/ Custom mini checker blue and green plaid upholstery, Unique Fabrication seat mounts, Shutt steering wheel, shift boot, and pedals, NRG steering, quick release, shift knob, and harnesses, NX bottle opener

Upholstery: Custom mini checker blue and green plaid upholstery, Front and rear door panels, Rear seats, Limited Edition Status Racing / Tjin Edition seats, Black suede outers on rear seats and racing seats, Customized stitching on rear seats and racing seats, Custom embroidered Status and Tjin Edition logos on racing seats

Uniqueness of Product and One-off Customization: Custom Unique Fabrication 6point roll cage with dimple dyes and harness bar painted solid black (chromoly material), Customized dash to fit around roll cage, Shaved window switch panels, painted green to match the rest of the interior, Status / Tjin Edition back or seats painted green to match the rest of the interior, Centre console bezel fibre glassed and painted to fit Shutt custom shift boot, Capped off a,b,c pillars

ICE: Accessories: Custom mounted Valor TV head-unit with DVD player (custom brackets), (2) ARC Audio Foose Edition amplifiers (1 for the mids and highs and one for the four 10” subwoofers), (4) 10” ARC Audio subwoofers, ARC Audio component speakers and tweeters, ARC Audio speak wiring, ARC Audio battery and fuse boxes, Custom mounted Scan Gauge on board computer system, Dynamat sound dampening padding

Installation: Custom audio enclosure under rear deck lid, Custom subwoofer boxes, Custom amp rack, Custom door panels with tweeters and mids and highs, Dynamat sound dampening padding installed behind custom enclosure

Sponsors: Unique Fabrication, Tuesday Afternoon, ID-Tuning, Tjin Edition, Turtle Wax, ICE, Mobil 1, Status Racing, Nitrous Express, Varad Vision, Ignited switches, Valor DVD, Arc Audio, Kinetik Power, Autogear, Toyo Tires, Extreme Dimensions, PPG Paint, A&A Autoworks, NRG, Shutt, TRD, Magnaflow, Perrin

Source [TunerZine]

12000K PURPLE SUPER PLASMA XENON HID H4 LOW BEAM SCION XD 08-08

Product Features

Simply the brightest bulb on the market without a ballast

Unconditional Lifetime Replacement Warranty

“Plug & Play Install, Uses existing OEM wiring”

“100% Safe for your wiring, will not melt your wiring or damage headlight housing”

DOT compliant & certified under 49USC30115 Standard 1588

Product Description

“These bulbs use the latest revolutionary Xenon gas technology The presence of Xenon gas in the halogen gas mix acts as a heat dissipater to allow the use of a hotter filament and there for get more lumens from the same wattage, as well as increasing the colour temperature of the light. We offer these bulbs in White Laser (6000K), Blue (8500K), and Purple (12000K).”

Priced at $19.99

Source [Amazon]

Scion xD 2008 Window Tint Kit

Product Features

“Rvinyl car window tint kits are precut specifically for the make, model and year listed in the prod

“This is a precut window tint kit, it is not simply a roll of window tint film. ”

Tint your vehicle’s windows at a fraction of the cost of tint shops.

Window Tint Film – 20% Dark Shade (Blocks 80% of Light)

“Our film when properly installed will not fade, lose colour, turn purple, or bubble.”

Product Description

“Rvinyl window tint kits are made from high quality tint film manufactured by Llumar. Our film when properly installed will not fade, lose colour, turn purple, or bubble. Precut tints are a cost effective way for the do-it-yourself installer to save time and money by taking the guess work out of the window tint installation process. Rvinyl car window tint kits are precut specifically for the make, model and year listed in the product name using advanced software and the most updated window tint pattern databases in the industry. We use professional grade equipment in the manufacturing of your film kit, allowing for a precision and professional results in half the time it would take you to install film by the roll. Although installing precut kits is significantly easier and less time consuming than installing film by the roll, it can still be a difficult process. Although many sites claim their kits are easy to install, we recommend you review the installation procedures outlined to make sure our product meets your needs. Installation difficulty depends on the ability of the installer, the particular windows being tinted and the compound surface of the rear windshield as it will require heat shrinking for proper installation. Front and rear windows are generally relatively easy to tint as they rarely require heat shrinking.”

Priced at $29.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• (0)
• The Evolution VIII by Mike Gross (1)
• The brilliant MR2 Type ONO (0)
• The 2006 Honda Civic EX by Chester Yu (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)

This is one hell of a beautiful looking machine that hardly resembles the car that it used to be, it has had so much work done on it that apart from the body shell there is probably nothing on there that is original. Yet this is a car of extremes, from what started off as an average car has finished up looking like something the mind of a mechanical genius.

What is amazing is the interior, this is like nothing that any production car is going have, in fact the interior of this car is like something out of this world, with black, red and silver taking over the inside of this machine. It is so fantastic inside that would not want to drive it for the fear of getting finger prints on some of those surfaces.

Engine Modification – Engine & Performance Qr25de 2.5L Mulitlayer Head gasket KMS Block Guard ARP Head studs Colder thermostat Killer Glass Pyrex race Hose Polished Turbonectics Hybrid T3/t4 Turbo ported Autoboost Turbo Manifold Custom protech-fabrications 3″ downpipe Protech-Fabrications 3″midpipe QTP 3″Y pipe Electric Exhaust Cut out VRS 3″catback exhaust MeganRacing carbonfiber muffler WTracing Fuel Rail 440cc precision Turbo Injectors Fuel Labs fuel filter Aeromotive fuel pressure regulator Walbrol 255lph Fuel Pump Nissport Oil Adapter Jim Wolf Technologies Balance Shaft Removal South West Autowerks Underdrive Pulley Cooling Mist methanol Injection Tial 38mm Wastegate Mishimoto Front Mount Intercooler Mishimoto Radiator Pushers fans

Engine Management – AEM FI/C Piggyback Zeitronix Wideband o2 Sensor Zeitronix Airfuel gauge Zeitronix datalogger Greddy Boost gauge Greddy profec B II boost controller Greddy Turbo Timer Greddy Oil temp gauge WTRacing Tune

Drivetrain Modification – ACT heavy duty Clutch 6 puck Stage 3

Suspension – Tein SS Suspension Macpherson Struts Nismo Strut Tower Brace Jimmy Bars 4 pt Lower tie bar

Wheels, Tires, Brakes – Motegi 17-inch lights BF Goodrich KDW 225/45 R17 Brembo Rotors Hawk Pads

Exterior Modification – Extreme Dimensions R33 front Bumper Vis Racing carbon Fiber hood Feelz Side Skirts Buddy club 2 rear bumper

Interior Modification – Custom Suede Bride Seats Suede A,b,c pillars suede dashboard Suede door panels Suede Headliner 2 stage red Crystal flake painted center dash and arm rest, lower pillars Custom painted Ichihahn Steering wheel Diamond Cut Floor Mats 4 pt Racing Harnesses Custom Audio Enclosure rear seat

I.C.E. – Pioneer 6.5 flip out TV Pioneer Dvd player Pioneer 6 disc Cd All Time color camera in trunk keyhole Full JBL component Speakers, 4 6×9 inch two way speakers 3 way 6.5s with crossovers and four tweeters JBL 15 inch GTO Subwoofer Alpine V12 5 Channel Amp Alpine 350 mono block class D Amp Optima Custom painted Battery

Sponsors – Wtuner.com Mishimoto.com

Source [Carbon8 Mag]

Injen RD1966BLK Cold Air Intake System 02-06 Nissan Sentra SER, Spec V (CARB 02-04 only) -L4 2.5L (Black Powder Coated)

Product Features

Built from 6061 T-6 Aluminum Alloy

All necessary Hardware included for easy installation

Completely bolt on, means no modifications required

Gains of up to 16hp/13ft.lbs of torque (on some models)

Limited lifetime warranty

Product Description

RD Series Race Division Intake Systems The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technology’s limited lifetime warranty. ***Images shown may or may not reflect actual vehicle stated and/or product size/Color*** *Do not attempt to install the intake system while the engine is hot* Replacement filter # X-1014.

Priced at $292.78

Source [Amazon]

Yellow Color 2003 Sentra SER Spec-V, coil-on-plug conversion / L4 Cylinder Ignition spark plug cable by Nology for NISSAN Sentra

Product Features

Quicker acceleration

Increased horsepower and torque

Higher top speed

Easier starting engine

Precise ignition timing and Increased fuel mileage

Product Description

Easy to add more horsepower and torque to your ride by this high performance spark plug wires. Now adding extra torque and horsepower to your NISSAN Sentra has never been easier! Simply replace your NISSAN Sentra spark plug wires with the newly improved Nology Hotwires. They are DYNO-proven to give you the extra horsepower and torque you?ve always craved. The secret of your Nology HotWires (NISSAN Sentra performance spark plug wires): They are the most technologically advanced ignition/spark plug wires available. HotWires are engineered with a special built-in capacitor that will create the most powerful spark possible – exclusive only to Hotwires. The result – This revolutionary design allows energy from your car’s ignition coil to accumulate in the capacitor until the voltage at the spark plug electrodes reaches the ionization point. At that split-second point the entire power of the stored spark is discharged at once, creating a spark 300 times more powerful. The result is faster, more complete combustion that increases the horsepower and torque to your NISSAN Sentra. Don’t settle for the ordinary. Replace your NISSAN Sentra spark plug wires with the Nology HotWires now and feel the difference! Order it now Nology ignition spark plug wires for NISSAN Sentra features: Quicker acceleration Increased horsepower and torque Higher top speed Easier starting engine Precise ignition timing Increased fuel mileage

Priced at $198.33

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The spectacular Nissan 350Z (0)
• The Mazda RX7 the best of the best (1)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)
• Great looking G35 Coupe (0)
• Totally cool looking Acura Integra (0)

Yet under the hood there are a few surprises like the IHI VF39 Turbo, STi Top Mount Intercooler, DeatschWerks 565cc Injectors and Walbro 255LPH Fuel Pump, it that does not get you going then I am afraid that nothing is likely to get you going. We like cars like this one, a wolf in sheep’s clothing is probably the most appropriate words that we could put to this car, do not be fooled by what you first see, this car means business.  

Specs of Edgar Gamboa’s 2003 Subaru WRX

Engine Modification

IHI VF39 Turbo

STi Top Mount Intercooler

DeatschWerks 565cc Injectors

Walbro 255LPH Fuel Pump

Perrin Up-Pipe

Perrin Catless Downpipe

Espelir JGT 500 Catback Exhaust

K&N Typhoon Short Ram Intake

SPT Oil Filler Cap

SPT Battery Tie Down

Kartboy Exhaust Hangersv

Engine Management

Cobb Accessport Protuned

Drivetrain Modification

STi Version 6 RA Gearset

Exedy Stage 1 Racing Clutch

B&M Short Shifter

Suspension

Tanabe DF210 Lowering Springs

KYB AGX Adjustable Gas Shocks

Tein Front Strut Bar

Tein Rear Strut Bar

Wheels, Tires, Brakes

JDM Racing Hart CP-F Tune R Wheels 18×8.5 +38

Falken Ziex ZE-512 225/40ZR18 Tires

Muteki Blue Closed End Lugnuts

Rotora 4 piston Metallic Blue front calipers

Rotora 13″ cross drilled/slotted front rotors

Rotora stainless steel-braided brake lines

Rotora street performance pads

ATE Super Blue Racing Brake Fluid

Exterior

JDM STi HID Projector Headlights

JDM STi Version 2 Front Lip

JDM STi Version 7 Hood Scoop

JDM STi Version 7 Front Grill

JDM STi Version 7 Solid Fog Covers

JDM STi Carbon Fiber Sidemarkers

STi Version 8 Spoiler

OEM WRX Painted Sideskirts

JDM Subaru Rainguards

JDM Subaru Front Aeroguards

JDM Subaru Rear Aeroguards

JDM WRX Pink Rear Badge

JUN Eyelids

Seibon Carbon Fiber Wingless Trunk

Interior

JDM STi 5 Speed Black Shift Knob

HKS Type 1 Turbo Timer

Escort Passport X50 Radar Detector

Lamco Boost Gauge

Source [Carbon8 Mag]

APR Front Carbon Wind Splitter Subaru WRX STI 04-05

Product Description

APR Front Carbon Wind Splitter Subaru WRX/STI 04-05 A Wind Splitters is a protruding flat surface in the front of a car that is designed to decrease front end lift and exert downforce. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

Features:

- Carbon Fiber Reinforcement – All APR Front Wind Splitters are reinforced with sheets of carbon fiber.

- Fully Functional Undertray – Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.

- Support Rods Included – Supporting every APR Front Wind Splitters are stainless steel Support Rods.

This product ships with a flat rate of $65-$75. Please call for shipping quote.

Priced at $288.99

Source [Amazon]

TC SPORTLINE 02-06 SUBARU IMPREZA WRX TURBO BURNOUT CATBACK EXHAUST 3.0″ (FC19)

Product Features

INCREASE IN PERFORMANCE, 100% GRADE A STAINLESS STEEL MATERIAL CONSTRUCTION

O.E. REPLACEMENT, BOLT-ON INSTALLATION, SPECIAL DESIGNED HANGERS TO PREVENT SLIPPAGE

SPECIFIC PIPING DIAMETER SELECTED TO MATCH EACH VEHICLE’S PERFORMANCE LEVEL, COMPACT MUFFLER DESIGN FOR REDUCING WEIGHT

SPECIAL SOUND DAMPENING MATERIALS TO REDUCE NOISE AND PRODUCE DEEP THROATY NOTE WITH REMOVABLE SLIENCER

4.0″ ZEN STYLE EXHAUST TIP FOR SPORTY APPEARANCE, 3.0″ PIPING FOR INCREASED EXHAUST FLOW

Product Description

Burnout series exhaust systems consist of many catback and axle back systems for various import and domestic sports compact vehicles. Designed to be O.E. replacements, each system bolts onto the original mounting locations with uniquely designed hangers that prevent slippage. With 3.0″ catback piping, it allows for increased exhaust flow throughout the RPM range without losing too much back pressure at lower RPM. Sporty Zen style muffler features compact canister with 4.0″ muffler tip. Special sound dampening materials inside the muffler canister facilitate deep and low throaty exhaust tone and increase low end torque for street use. Made of 100% grade A stainless steel material, the burnout exhaust systems are not only attractive in appearance but they also have high durability.

Priced at $159.20

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• This Subaru is all white! (1)
• The New World Samurai Integra Type R (0)
• The Mazda RX7 the best of the best (1)
• The Evolution VIII by Mike Gross (1)
• 2002 Subaru Impreza WRX – Born Again (0)

The work on this car is barely three years old and it has already reached its main goal, to win trophies and get into magazines. However, this car is something else; with brilliant colour and fantastic features, this Lexus is currently the supreme Lexus IS300 around at the moment. That in itself is something to celebrate.

Therefore, what now for the future, a new car or project, or simple a reboot of this model, the later would seem to be in order and the target is first up to crack 900 HP and then move on to breaking some of those quarter mile records that seem so tempting now and then.

Specs: Output 748 hp @ 30 psi

Engine – 2JZGTE Toyota Supra engine; HKS 272 camshafts, titanium exhaust, adjustable cam gears, T51R KAI turbocharger, manifold, black limited super sequential blow-off valve, GT II series wastegate, EVC V boost controller, F-Con V Pro, DLI Twin Power ignition, spark plugs, fuel injector clips, 1,000cc fuel injectors, Cosmo fuel pumps (x2), fuel rail; custom oil pan; Veilside intake manifold; ADF custom chop-welded intercooler and pipes, custom radiator hoses; ARC radiator, radiator diversion panels, oil cooler for Nissan Skyline R34 RB26DETT, oil caps, radiator caps; Flex-a-lite 12-inch radiator fan; Aeromotive A1000-6 fuel regulator; Supra polished dress-up kit; stainless steel lines and fittings

Drivetrain – R154 Toyota Chaser transmission; TRD 1.5-way limited-slip differential; Ogura Racing Clutch, lightened flywheel; custom carbon fibre one-piece driveshaft

Suspension – HKS Hipermax II front and rear coilovers; TRD L-Tuned 32mm front sway bar, L-Tuned 19mm rear sway bar; Cusco carbon fibre rear strut brace, eight-point roll cage with polished add-on side bars; TRD bushings

Wheels/Tires – 19-inch Volk TE37 wheels with Toyo T1R 235/35-19 tires

Brakes – Endless six-piston 310mm front brakes, steel braided brake lines

Exterior – Laguna Seca Blue paint; Chargespeed Japan front lip, side skirts, rear lip, wide fenders, hood, carbon fibre vortex generator roof wing, brake ducts; Craft Square mirrors; Top Secret titanium tow hook, hood pins

Interior – Bride Low Max Gias carbon-Kevlar seats, upholstery, gradiation inserts; deleted rear seats with custom-wrapped panel; custom HKS Camp II display gauge cluster replacement, custom-mounted HKS F-Con V Pro, limited shifter knob; Key’s flat-type 325mm steering wheel

Electronics – Defi link meter BF gauges; HKS Camp II no-gauge cluster; Eclipse AVN-5500 head unit; Nesa seven-inch monitor; Alpine MRD-M1001 amplifiers, speakers, subwoofers, separates; Stinger wiring

Source [Import Tuner]

Lexus Is300 REMOTE Engine START Factory OEM Add-On

Product Description

ADD REMOTE START TO YOUR FACTORY KEYLESS ENTRY / ALARM!!!

DESIGNED WITH PRIDE IN THE USA!!! SUPPORT AMERICAN JOBS!

The competition sells cheap IMPORTED remote starts that are LOW QUALITY and have NO WARRANTY. This kit comes from Stellar (the best remote start manufacturer in the world) and has a limited LIFETIME WARRANTY from the factory, as well as TOLL-FREE TECH SUPPORT for any questions.

The RS1050 WORKS WITH YOUR FACTORY KEYLESS SYSTEM.

This will allow you to use your existing keyless entry remote controls! JUST HIT THE “UNLOCK” BUTTON ON YOUR FACTORY REMOTE 3 TIMES AND YOUR VEHICLE STARTS RIGHT UP!!! SAVE HUNDREDS $$ ON YOUR INSTALL!

With Tach-Less Installation, there is no need to install a wire to you tachometer. An Anti-Grind feature plus adjustable Crank Time eliminates wear and tear on your starter.

This kit will work on BOTH manual and automatic transmissions. (It has an input for the parking brake for manual vehicles that will not allow the unit to engage unless the parking break is on)

The RS1050 works on ALL DIESEL vehicles and features system self diagnostics, which will notify you if the system has been installed improperly. The RS-1050 kit also includes plug in LED, Valet button, and wiring harness. Stellar’s RS-1050 is Made in the USA and comes with a Limited Lifetime Warranty.

Parking Light Output: Stellar Alarms offer a built-in parking light relay. This allows the unit to flash the parking lights once on lock and twice on unlock. This visual conformation ensures your vehicles safety.

VATS & PATS Bypass Output: Reduces installation time because the RS1050 is compatible with all bypass modules.

Diesel Mode: Get Started! The RS1050 remote start feature is compatible with diesel engines.

Anti-Grind Feature: Tired of hearing a grinding noise with after-market remote starters? The RS1050 eliminates starter grinding on your vehicle.

Made in the USA:

Priced at $99

Source [Amazon]

Secret Weapon Intake (Lexus | IS300 | 00-03)

Product Description

The air filter can be totally taken apart and cleaned. The foam is denser and more thicker than the Dragon filter.

The velocity stank inside the air filter is a TRUE VELOCITY STACK. The Air filter has Ram Air capability, by hooking up the hose to the top of the air filter.

The intake has another Air Passage way inside the intake pipe to create a Air Fusion, imagine 2 different pathways of air inside the intake pipe, one air traveling in pathway #1 going 2 x faster than pathway #2. When the two different pathways of airflow meet at the end of the pipe they create a fusion effect which enhances the AIR SPEED of the by 3 times.

The Secret Weapon Intake Systems is an result of countless hours of testing and tuning of air intake velocity, Airmass and Airspeed for each vehicle application. The Result, an intake system that performs better than any Cold Air Intake, but with a Short Ram. It is possible by Weapon*R’s Patent Pending Speed Velocity theory, By creating a higher airspeed in the intake path you increase airmass and airspeed, which greatly increase horsepower.

This is possible by Creating two different paths of airflow, both flowing at different airspeeds, due to the tubing diameter in which the air is traveling. Now when the two different paths of air meet, they create a vacuum, which is where the airspeed starts to multiply, forcing more air into the engine at a higher rate, creating more horsepower.

The Secret Weapon Intake Systems are carefully CNC mendrel bent out of 6061 Aluminium, and then Hand Tig Welded in sections to ensure a constant balance in airflow, regulation in airspeed, positive seal and proper fittment. Each one of these intake systems are carefully tuned, by matching the engines displacement, air intake capacity and airspeed to the intake systems tube size, length and secondary pathway tubing diameters to maximize the full potential of the SECRET WEAPON INTAKE SYSTEM.

This Intake is Matched with our Newl

Priced at $266.90

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The 2009 Lexus IS by Brian Fox (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The Lexus GS (Carbon GS) (0)
• The Honda Civic DX project (0)

There are two things that you notice here, the fantastic green colour that is a normal green colour that is used by Honda and the black top just ties it all together nicely. We must not forget the gold 16″ Mugen MF10 wheels and lightweight black lug nuts, all of these points make the machine a super machine, not just in looks but clearly in performance too.

SPECS 1994 Honda Civic Si

Exterior: Galapagos Green that is seen on the Honda Element, Midnight Black Pearl Roof, VIS double sided carbon fibre hood, Spoon Carbon duckbill, Password JDM amber corner lights, JDM bronze glass hatch, HOP slim side mouldings, HOP window visors, JDM parking sticker, emissions, tire pressure, gas decals

Interior: Bride Low Max carbon Kevlar seat, Bride rail, ITR floor mats, ITR dash, Mugen ITR cluster, FG360 steering wheel, pedal set, Takata 4 point harness, B&M short shifter, Miracle X-bar first generation, NRG quick hub release, Canadian air bag tray, Skunk2 shift knob, A’PEXi V-AFC, Fully colour matched interior

Motor: B18C block with Endyn Roller Wave pistons 11.5:1 compression ratio, Skunk2 cams with Pro cam gears, springs and retainers, ARP studs and bolts, JDM ITR 4-1 header heat wrapped, Blox intake manifold, Mugen Formula valve cover, Endyn oil catch canister, Password carbon CAI, Crane PS-92 ignition coil, MSD cap, NGK 8.5 spark plug wires, Mugen ECU

Transmission: 98 JDM ITR transmission with 4.7 Final drive, ACT clutch stage 2 with lightened flywheel, ITR master cylinder

Suspension/Wheels/Tires: 16″ Mugen MF10s (16×7) and Mugen ultra light lug nuts, Yokohama AVS 100s, Integra Type R suspension, Spoon 2 piston callipers, Nissin pads, Power Stop rotors, Skunk2 rear tie bar with Beaks kit, Custom front traction bars made by Fass Engineering

Source [Tunerzine]

Yellow OEM SPEC. Fog Light – Honda Civic SI 3-Door 2002-2005 (With Wiring Kit)

Product Features

OEM specification

Plug and play no modification

Wiring harness

On-off switch

Light bulbs included

Product Description

Fog functions in providing a wider beam pattern to illuminate below the normal line of sight to reduce reflected light. Good set of fog lights in your car helps you see better when driving in adverse weather conditions. Because great visibility is needed to achieve driving safety, equipping your vehicle with highly efficient fog lights is vital. Aside from being a functional component, fog lights also add to the aesthetic look of your car. The OR fog light can give your car the customized look and appeal that you want. As the part adorns the front edge of your vehicle, leaving much better and appealing impressions for your cars presence will be simple. Continually enjoy superior ride and driving experience with a stylish ride by employing quality fog lights. Cutting edge technology and engineering has been incorporated in the product design to enable it to offer reliable service life that lasts. Heavy duty materials are incorporated in the product that allows it to offer efficient performance for miles and miles of driving.

Priced at $77.36

Source [Amazon]

Honda Civic SI Chrome Mesh Grille Insert 02-05

Product Features

Brand New 1 piece grille

No Drilling or Fabrication needed to your vehicle

Mounting hardware included

Easy to Follow Instructions included

PRECUT for a quick installation

Product Description

This is a Brand New 1 piece chrome like plated mesh grille insert kit. This grill will fit all Honda Civic Si models from the 2002-2005. This mesh grille insert is for the upper grille. Note: This is not to replace your factory grille, it is simply an insert to change the current look of your car because this grille is simply an overlay. Therefore if you do not have the same front end as the picture this will not work. The mesh grille insert will attach straight on top of your factory grille using the provided wiring harness. The mesh has a diamond style pattern. This is very popular in the automotive scene. The mesh will not restrict airflow into your engine. The diamond mesh pattern has opens of 1/4″ by 3/8″. The mesh is a 20 gauge material meaning that it is strong yet it is also pliable making this a great product to work with. The mesh is a chrome ‘like’ mesh because it is not true chrome but is resembles it because of the shinny finish.

Priced at $12

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Honda Civic Si from 2000 (0)
• Totally cool looking Acura Integra (0)
• The New World Samurai Integra Type R (0)
• The Honda Civic DX project (0)
• The 2006 Honda Civic EX by Chester Yu (0)

It is the paint job that you first see, and there is nothing wrong with that, because initially the body looks messy with too much going on, it is only when we get focused that the colours come out and the images are there to be discovered. It may not look like it, but this Integra has had a huge amount of work done on it, just take a look at the specs to see how much.

Justin VanBlargan – 1992 Acura Integra

Engine Modification – The Head: stage 3 head job (thanks to www.performanceporting.com, these guys have the best prices and do grade A work!) , (Fully cleaned, gasket match ported intake, gasket match ported exhaust/polished, polished combustion chambers, gasket surfaces cleaned, Super tech valves, springs, retainers & valve seals, valve clearances checked, head milled .030, 3 angle valve job, Crower Stage 2 403 camshafts, Crower polished cam gears, ARP Head & Main studs, Gates Racing timing and supertine belt, Kamikaze Black 4-1 Header, MSD Extreme Distributor Cap 82922,Rotor 8092, Wire Set Extreme 8.5MM 35329,Thermotec Cool-Air Tube Heat Shield ,Cool-It Plug Wire Sleeves Red 4 Pack, Generation II Copper Header Wrap 1′x50′, & Starter Heat Shield, Golden Eagle Fuel Rail (Blue), K&N Short Ram ,Skunk2 Pro Series Intake Manifold ,RC Injectors. The Block: Bored .25MM , Mahle 10.5 Pistons, rings, & pins , BILLET CROWERODS ACURA INTEGRA 1.8 , Moroso Oil Pan , ACL Race main, rod and thrust bearings thanks to Cometic Full Gasket kit C4388 & Head gasket C4238-030, ARP rod bolts Fresh Hone, Ralco RZ Single Belt Conversion Crank Pulley (Alternator only) , Aasco Lightweight Flywheel (8lb) , Exedy Stage 2 Clutch & Pressure Plate, Raxles Custom All Motor/Autocross SCCA Axles, LSD YS1 JDM XSi Trans, Fidanza Short Throw, Full wire tuck with battery relocated to the trunk, cruise control hidden in the wiper cowl and the fuse box behind the centre console, Hilco Fasteners red beauty engine dress up kit, Custom polished bolt oil dipstick, *Full Shaved Engine Bay Coming Soon!* , Supertech Performance Block Guard, Hasport Motor Mounts (70A)

Engine Management – PR4 ECU with a SSR chip and tuned and base mapped on Chrome Pro

Drive train Modification – XSi LSD transmission, Exedy Stage 2 clutch and pressure plate, Aasco 8lb flywheel, 300 WHP Raxles axles and more.

Suspension – Brembo slotted & drilled rotors, Axxis Performance HPS ceramic brake pads, Goodridge S.S. brake lines (front & rear), Tein S. Tech lowering springs, KYB GR2 shocks, ASR sway bar kit, ASR sub frame brace camber kit, Explicit Speed Performance 4 pt. rear strut bar, 3pt front strut bar, Megan racing lower control arms, adjustable Skunk2 front upper control arms, SPC rear adjustable camber kit.

Wheels, Tires, Brakes – 15″ Rota JMAGS (Royal Lip Red) wrapped in Continental ContiProContact 2�s (195/50/15)

Exterior Modification – JDP Front lip, JDM plate re-locater, Spec-D Tuning amber corner lights, amber bumper lights, shaved badges and hatch handle and key hole. Slyvania silverstar ultra headlights, OEM Hood Bra, OEM moon roof visor, OEM mud flaps, Red Vision Motor works rear tow hook, GO-Pro Hero Motorsports Camera

Interior Modification – Soon to be fully custom interior! Currently: Oil burnt shift knob, OEM floor mats, JDM road flare, 270MM flat original tint Broadway mirror, 12V Spot light (blue), Red carpet and Red corduroy door panel inserts., ITR suede shift & ebrake boot, Vibrant performance polished pedals, Auto meter cobalt digital volt, fuel pressure, water temp & oil pressure gauges.

I.C.E. – Jensen : VM9512 in-dash dvd/cd/radio, 2X PowerPlus 525 5.25� component speakers in the doors and hatch, Power 900 watt mono subwoofer amplifier, Power 760 4 channel component amplifier, 2x JPW124 12� subwoofer, custom speaker enclosure by AudioTek L.L.C.

Sponsors – Autometer, Fastbrakes, Rota Wheels, Kamikaze Performance, Ron Davis Racing Radiators, Hasport, Exedy, Raxles, Crower, Cometic, MSD, Gates Racing, Ralco RZ, Aasco Flywheels, Supertech

Numbers (WHP, 0 to 60 mph and etc.) – Have not dynoed or ran the 1/4 yet

Others – Thanks to all my friends, family , god , my wife and sponsors for putting up with me with this never ending project. Also thanks to the troops and fallen hereos who have faught for my freedom .

Source [Carbon8 Mag]

Acura Integra Bolt on Door Conversion Kit

Product Features

Direct Bolt On Door Conversion Kit Body Kit

Vertical Door Conversion Kit

Lambo Style Door Conversion Kit

Brand new; 100% satisfaction guaranteed!

Product Description

What’s Included: All Necessary Hardware Installation Instructions or CD (can also be emailed to you upon request) Wire Extension kit Left side and right side LAMBO DOOR assembly Actual Lambo Door kit x 2 (Left & Right Hinges) Engineered to be 3X stronger than any kit on the market today 6 months shocks warranty Lifetime show quality finish Complete BOLT ON KIT Made for your car 75 Degrees Lift Designed for direct fit & quick install Minor Modifications Might be Required No cutting (most inner fenders need to be rolled) No major welding nor drilling No painting nor Re-painting No leaking (doors close and seal like factory) Complete reversible installation Kits are painted black 100% Machine Plasma Cut Lifetime show quality finish Paintable Maintains factory safety, accessories & function Doors continue to utilize OEM latches & accessories Electro less Heavy Duty 650lb or 750lbs or 850lbs Gas Struts X 2 (shock pressure depends on the kit model) BRAND NEW! GUARANTEED QUALITY

Priced at $329.99

Source [Amazon]

94 – 01 Acura Integra Dual Cluster Bezel Pod

Product Features

Black Dual Cluster Gauge Pod

Holds two 52mm or 2 1/16th inch gauges

Crafted from the Highest Quality ABS plastic Available

Free Installation Support

1 Year Warranty

Product Description

GlowShifts 94 – 01 Acura Integra Cluster Pod is a dual gauge pod specifically designed for your Integra’s instrument cluster and will house two 52mm or 2 1/16th inch gauges while bringing a unique style and look to your vehicles interior. Each bezel gauge pod is crafted from the highest quality ABS plastic available to withstand cracking, fading, and warping while still giving your Integra a custom fit and finish. This pod is currently offered in a clean OEM black style.

Priced at $24.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The New World Samurai Integra Type R (0)
• The spectacular Nissan 350Z (0)
• The Integra DC2 in a strange green colour (0)
• The cool old school Honda Civic Si (0)
• Acura Integra LS by Kai Lung (1)

The bodywork is great; in fact, it looks as if there has only been minimal amounts of work done on this car, such as a roof wing, side skirts and front bumper. One nice touch is the wing mirror covers, these have carbon fibre covers, but even better than that is the roof section, that has been made by hand from carbon fibre too.

This is car that almost looks like a prototype or even a concept car that you would see at a car show, but it is just the result of a well thought out plan, a lot of hard work and of course the one factor that ties all modified cars, a fair amount of cash!

Engine Modification

100 Shot NOS

Injen Intake

Motordyne ?Plenum Spacer

Stillen engine damper

HKS Hi-Power Exhaust

RE Short Shifter

Engine Management

Greddy Emanage Ultimate

Drive train Modification

JWT Clutch Flywheel

Chromoly Pivot Fork

Stainless Steel CLutch Line

Suspension

Tein CS coilover

Tein EDFC

Tein inner/outer tie rods

GT-Spec rear lower tie bar

GT-Spec rear lower mid brace

GT-Spec front lower tie bar

NRG front upper strut bar

Wheels, Tires, Brakes

OEM Brembo callipers w/ Axxis Ultimate pads

OEM Brembo rotors

SSR Professor MS-1 wheels (19×9+17 and 19×10.5+21)

General Exclaim tires (245/30/19 and 275/30/19)

Exterior

Top Secret front bumper

INGS+1 side skirts

INGS+1 rear apron

Seibon JS Style Carbon fiber hood

Mastergrade carbon fibber trunk

Carbon Craft carbon fibber mirror covers

Custom hand laid carbon fibber roof (not an overlay)

2006 Projector headlight upgrade

UTR2 roof wing

Jimmy Auto Body custom ice pearl red (Harold Rosado Book of Secrets)

Interior

Nismo Shift Knob

JDM Double Din Conversion

I.C.E.

Alpine IVA D200 multi media head units

Alpine IPod Hookup

JL Audio 1000/1 mono amp

JL Audio 300/4 4 channel amp

2 JL Audio 12W6V2

JL Audio Bass knob

Tsunami 1.5 Farad Cap

Optima Red Top Battery

Sponsors

None

Source [Carbon8 Mag]

G35 Coupe parking light INFINITI G35 Coupe light bulb upgrade by Led

Product Features

Low power consumption

Easy to install and fit for most import and domestic vehicles

High Intensity LEDs in each light bulb

Super ultra bright colour bulb

Product Description

2006 INFINITI G35 Coupe T11 High Intensity Blue LED Wedge Bulb – 6 LED Dial Wedge Bulbs parking light light bulb upgrade — INFINITI G35 Coupe parking light light bulb upgrade 2006 T11 Super Bright Blue LED Wedge bulbs OEM light Bulb with Build in 6 super LED. Manufactory part no: T10, T-10, 194, 168, 158, 12256, 12961, 2821, 2825, W5W / Twin LED Wedge Bulb Pack — Newest bulb upgrades for your car, truck or SUV – Super High Intensity 194 Wedge Super Ultra Bright LED, automotive LED Light, car replacement bulb. (Multi-LED wide-angle light source-designed automotive LED replacement light bulb for car.)With all the new technology coming out for the new vehicles on the market, LED lighting is one of the most exciting innovations. Automotive LED light produces more intense light. LED light travels faster and farther then any ordinary automotive light. Consume at least 20 times less power then regular bulbs and have a much longer life spends, which means you can save more money. Our new line of automotive LED light bulbs gives you all the benefits of LED lighting, which you cannot get from regular light bulbs. In addition, this super ultra bright LED features a super bright blue colour; this LED replacement bulb is the most solid blue colour light you can get for your car on the market. 194 Wedge LED Replacement Bulb, Push-in Wedge Type Bulb Replacement – 6 Super Ultra Bright Blue LED Dial 194 Wedge Bulb Features: Low power consumption: 12V 0.2W A fit for most import and domestic vehicles Six high Intensity LEDs in each wedge light bulb Super Ultra Bright Blue Colour to mix with the headlight or fog light Fit Manufacture part No. 194 , 168 , 158 , 12256 , 12961, W5W This automotive LED light upgrade car light bulb is the best fit to replace factory bulbs for brake lights, rear tail lights, side marker lights, front marker lights, dome lights, dash board lights and interior lights. For some vehicles with fast signal

Priced at $14.95

Source [Amazon]

New! Infiniti G35 Coupe Billet Aluminium Grille/Grill, Bumper, Polished 03-07

Product Description

This is a Brand New grille insert to custom fit your vehicle (not for Sport Package bumpers). Give your vehicle a new look and add instant value to your vehicle’s re-sale price. EASY TO INSTALL! These grilles install right in your factory bumper cover openings, and fasten to your existing plastic insert creating a new sleek look. This grille is made to last. Our grilles are built from 6063 T52 aircraft grade aluminium with 5/32″ thick crossbars and solid 1/2″ billets and then polished to a mirror finish using a 4 step polishing process. We ensure a perfect fit every time and a long service life and lasting durability against the elements that corrode and destroy the other grilles on the market.

Features:

Highly Polished: Never needs polishing

Four step polishing process offers mirror-like finish

5/32″ Thick crossbars

Solid 1/2″ billets

No unsightly weld or splatter marks

Installation hardware and instructions included

Installs in minutes Applications:

Infiniti

G35, 03-07

Priced at $42.75

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Infiniti G35 ready to go (0)
• The spectacular Nissan 350Z (0)
• 2002 Nissan Sentra Spec V from Terence Gamble (0)
• Totally cool looking Acura Integra (0)
• The Nissan 350Z ready for action (0)

She created this car from scratch, it is not a build that just looks good either, this has been designed to drift and although she does not compete in competitions, she is currently fine tuning her skills and will eventually get onto the drifting circuit, then this car will be noticed.

It is the colour is taken from a famous Japanese drifting car, but it is the Vertex bodywork that makes this car stand out, even more than the yellow colour. Under the body is car quite capable of producing just under four hundred HP. Now there is a lot that can be done with that sort of power.

This is finished project now, and Tiffany is enjoying her ride, hopefully seeing how extreme drifting can help a driver to be first past the post. Whatever she is doing, this is a good job with the Nissan Skyline proving that a good car can be made into a great car.

Nissan Skyline Specs:

Engine – RB25DE+T, rebuilt with ACL main & big end race bearings, 4 layer Cometic metal head gasket, high mount stainless tune agent exhaust manifold, Garrett GT3071R turbo, KKR 38mm external gate, Sard fuel pressure regulator, Nismo 555cc injectors, A’PEXi Power FC, Cusco oil catch can, front mount intercooler, stainless steel intercooler piping and dump pipe, Bosch 550hp fuel pump, A’PEXi pod filter, Exedy heavy-duty clutch, lightened flywheel, GReddy Profec-B boost controller, stainless Kakimoto 3 1/2″ exhaust, HKS turbo timer, Prof blow-off valve

Suspension – JIC Magic coil overs & springs, JIC Magic caster bars, Nismo upper and lower front control arms, Solid Alloy Cradle Bushes, Cusco rear camber arms, converted to S13 non Hicas steering rack & rear cradle, Solid Alloy Steering Shaft Spacer, GTR front strut brace, Spats rear strut brace

Interior – Defi link boost pressure & water temp gauges with controller unit, Bride Brix driver’s seat, Sports steering wheel, Alpine head unit, Pioneer 6×9s & 2 x 12″ Kicker subs

Wheels/Tires – 17 x 9 rear and 17 x 8 front Work Equips rims

Exterior – folded and pumped front and rear guards, Full Vertex body kit, Bee*R yellow with green and electric blue flicks, GTR bonnet

Source [Tunerzine]

00-93 Skyline(S.O.T.) / ECR33, ER34/RB25DET / L6 Cylinder NISSAN Skyline spark plug wires-Nology Color:Orange

Product Features

Nology HotWires spark plug wires NISSAN Skyline spark plug wires-Feel the power of Nology 00-93 Skyline(S.O.T.) / ECR33, ER34/RB25DET / L6 Cylinder

More horsepower that’s 100% smog legal. Limited lifetime warranty. – Fits NISSAN Skyline 00,99,98,97,96,95,94,93, 2000,1999,1998,1997,1996,1995,1994,1993,

Installation Method – Replacement

Product Description

High performance spark plug wires upgrade – Add more Horsepower and Torque to your NISSAN Skyline Now adding extra torque and horsepower to your NISSAN Skyline has never been easier! Simply replace your NISSAN Skyline spark plug wires with the newly improved Nology Hotwires. They are DYNO-proven to give you the extra horsepower and torque you have always craved. The secret of your Nology HotWires (NISSAN Skyline performance spark plug wires):They are the most technologically advanced ignition/spark plug wires available. HotWires are engineered with a special built-in capacitor that will create the most powerful spark possible – exclusive only to Hotwires. The result -This revolutionary design allows energy from your car’s ignition coil to accumulate in the capacitor until the voltage at the spark plug electrodes reaches the ionization point. At that split-second point the entire power of the stored spark is discharged at once, creating a spark 300 times more powerful. The result is faster, more complete combustion that increases the horsepower and torque to your NISSAN Skyline. Don’t get left behind! Order your NISSAN Skyline Nology spark plug wires today. Easy online ordering! Nology ignition spark plug wires for NISSAN Skyline features: Quicker accelerationIncreased horsepower and torque Higher top speed Easier starting engine Precise ignition timing Increased fuel mileage

Priced at $239.19

Source [Amazon]

OBX Blue Adjustable Cam Gear – 89-03 Nissan Skyline (RB20/RB26 Engines Only)

Product Features

CAD designed and CNC machined from lightweight 6061-T6 billet aluminium

Advanced 5-bolt pattern to eliminate change of cam gear timing

Allows for single degree adjustment to a maximum of +/- 10 degrees (advance/retard)

Laser cut degree marks for easy reading and adjustment

Hard-baked gears teeth prevent wear under the toughest conditions 

Product Description

OBX Precision Adjustable Cam Sprockets are a wonderful method of extracting extra power from an engine. Adjustable +/- 10 degrees, these sprockets allow the user to tune the engine for more power in low, middle or upper RPM ranges. This adjustment allows the tuner to move the peak power along the engines natural power band by advancing or retarding the cam timing.

CAD designed and CNC machined from 6061-T6 aircraft grade aluminium, the adjustable cam sprockets are extremely lightweight yet able to withstand extreme abuse. The hard baked gear teeth prevent wear and tear and our advanced 5 point locking design keep belt slippage from occurring.

OBX Precision Adjustable Cam Sprockets are a great way to dress up an engine and at the same time tunable to reach an engines true potential.

Priced at $180

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The spectacular Nissan 350Z (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)

This is almost a classic car yet it has the lines of modern build, especially inside where there has been a lot work done on it. Not all of the work will be to everyone’s taste in fact even the owner calls it “Osaka Style” which basically means you take a great looking car and then ruin it by adding too much. You see builds like that all of the time though, so there really is nothing wrong with going over the top, that is what import building is all about.

Behind The Build – 1993 Mazda RX-7

Name – Bruce Kress

Age – 21

Hometown – Placentia, CA

Occupation – Student/Construction

Hobbies – Being one of “those guys”

Build time – 8 Months

Feedback – BruceFD@gmail.com

1993 Mazda RX-7 – F-The Purists

Output 300 whp @ 8,100

Engine – 13B-REW; Rotary Extreme Stage 2 street port; GReddy Type-R blow-off valve, front-mount intercooler and piping, pulleys; HKS Super Mega Flow intakes (x2), downpipe; custom mid-pipe, exhaust; Fluidyne radiator; Spac radiator cap; Juran water temperature sensor holder; R Magic oil cap; AST delete; Odyssey dry cell battery, relocated to trunk; Setrabb 32-row engine oil cooler; A’PEXi Power FC, commander; Sun Auto Hyper Voltage System; ’60s ambulance siren horn conversion

Drivetrain – Exedy Stage 2 Cerametallic clutch; lightened flywheel; OEM Torsen LSD

Suspension – Kei Office coilovers; Swift springs (14kg/mm front, 18kg/mm rear rates); Super Pro bushings

Wheels/Tires – Weds Cerberus 2 wheels (19×10 front, 19×12 rear); Hankook V4ES tires, 215/35-19 (front); Falken FK452 tires, 275/30-19 (rear)

Brakes – Earl’s stainless steel brake lines

Exterior – Feed front bumper; JP side skirts, rear bumper; JDM FD3S hood, side markers, LED running lights; RE Amemiya fender mirrors, taillight cover; GP Sports mid wing; shaved rear indicator light, radio antenna, rear wiper, water nozzles; custom fender modification; ‘09 Honda Fit Blackberry Pearl paint; Xenon-Vision 5,000K HID conversion; IPF puddle lights

Interior – OEM black interior conversion; Bride Zeta 2 seats, modified seat rails; Nardi 330mm Deep Corn steering wheel; Works Bell short hub, quick release; Defi Link, BF gauges: boost, water temp., oil temp., oil pressure, EGT; A’PEXi Power FC Commander; Gotham Racing PFC commander holder; the largest, pinkest shift knob ever; Behrman LCD cabin lights, license plate light; Broadway mirror; custom floor mats, switch panel

Electronics – Pioneer AVH-P6600DVD head unit, Premier 10-inch shallow subs (X2), Premier two-channel 1,200-watt amp, three-way door speakers; Bose factory optional rear sub; custom pink fur enclosures

Source [Import Tuner]

OBX Blue Spark Plug Wire Set 86-92 Mazda RX-7 1.3L ALL

Product Features

10.3mm heavy-duty quality construction 100% silicone double wrap

High strength fibreglass braid for added “pull strength”

Stainless steel plug terminals for high electrical conductivity and corrosion resistance

Backed By Manufacturer Limited Lifetime Warranty

(Product shown for colour reference only)

Product Description

OBX High Performance Spark Plug Wires are the highest quality and thickest wires available in today’s market. Six individually wrapped 18 strand copper cores are wrapped with a stainless steel conductor to ensure greater ignition current conduction and longer spark duration. The core is covered with a special synthetic dielectric compound that prevents all electrical leakage and arcing of the current due to microscopic cracks when aging occurs. Extra heavy duty glass braid is woven around to withstand extreme wire stretch from pulling. All of this is coated with an outer sheeting of silicone double wrap measuring 10.3 mm in thickness to withstand extreme engine bay temperatures.

OBX wires are compatible with all types and brands of spark plugs on the market today to increase voltage output and provide maximum combustion on today’s high performance engines. These wires have been dyno tested to significantly increase horsepower and torque on both stock and modified engines over OEM ignition wires.

Priced at $40

Source [Amazon]

HKS Full Turbo Upgrade: T51R KAI: MAZDA RX-7 #11631

Product Description

HKS Full Turbo Upgrade Kits are designed to replace the entire factory turbocharger system with a high-performance turbo that maximizes the horsepower potential of the engine. Included along with a HKS Signature Series or GT Series turbo(s) is a more efficient turbo manifold that has been precisely engineered out of cast-iron or tubular stainless steel. An HKS external wastegate is also included along with a downpipe, suction pipe, intercooler pipe and all the necessary fittings and lines for a complete installation. HKS Full Turbo Upgrade Kits are strictly for off-road use only.

Features:

- 56T Trim

- 1 A/R

- V-band Flange Type

- GT Wastegate Type

- T51R KAI

***Picture may differ slightly from actual product***

Fits: MAZDA RX-7 1993-1996 Turbo ; S/S Manifold (Off Road Use Only). Requires JDM intake manifold

Priced at $7,193.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Mazda RX7 the best of the best (1)
• The cool silver Subaru WRX (2003) (0)
• Mazda RX7 in silver (0)
• Mazda RX-7 in beautiful red (0)
• 2002 Nissan Sentra Spec V from Terence Gamble (0)

However, this is a nice looking car; it has had attention to detail, which makes all of the difference. Sure, this is not going win any races, but that is not the purpose in any case. This is private car and the work that has been done it subject to the likes and dislikes of the owner, as it should be.

Specs:

Engine Modification – URP NWP spacer kit Hot Shot headers Fujita cold-air intake system Greddy SP-2 cat-back system Braided hoses Custom engine cover ZEX wet 50-75 shot nitrous system Blue LED purge kit White LED�s for night meets Blue neon light in grille area Polished Stillen FSB

Engine Management – Apex

Suspension – Eibach lowering springs Stillen polished RSB Racing Line front and rear end links Stillen rear sway bar

Wheels, Tires, Brakes – Zen 18� chrome rims Yokohama all season tires. Drilled/Slotted rotors Hawk HF brake pads Stainless steel brake lines

Exterior Modification – Redlinemax.com custom grill Debadged trunk area Rare Nissan Wing on trunk 2 red LED�s under wing that lights up when brake pedal is pressed Weather tech rain guards Carbon fiber pillar overlays Rear window spoiler Moon roof spoiler Stillen front lip

Interior Modification – Custom pedal covers Custom shifter knob Custom e-brake handle Custom dash kit Custom leather e-brake boot Custom arm rest cover Custom made cigar humidor in arm rest Blue LED�s in dome lights Blue neon lights under dash and in trunk Sliver Zex bottle, automatic bottle opener, heated bottle warmer, gauge and blow down tube in trunk Bose OEM system 2 extra tweeters. One on each side of the windshield Duel 2 12″ sub woofers and 1000 watt amp. TV’s in headrest One TV in driver’s side visor, wife did not want to lose mirror on her side.

Sponsors – Myself

Numbers (WHP, 0 to 60 mph and etc.) – 241 whp and 284.5 whp with juice

Source [Carbon8 Mag]

04-06 NISSAN MAXIMA FOG LIGHTS driving lamp 3.5 se 2005

Product Features

(2) 55 Watt 4100K Xenon Lamps

Built-in 10,000K LED Parking Lights

3 Function Rocker Switch

Plug-In Wiring Harness + AMP & Relay Included

Free Hat Valued at $19.99

Product Description

This auction includes a complete fog lamp kit for use on the model listed in this auction without the factory fog lamps or as a replacement for existing factory fog lamps. This auction includes everything needed to install and requires no other parts or extensive modification. The BL-300w outperforms regular fog and driving lights in any weather condition. 90 degree beam pattern is both wide and far reaching, die-cast metal housing 55W H3 xenon 4100K white bulbs combined with 10,000K LED parking lights, 3.5″ lamps, heavy-duty mounting brackets, 3-function switch, deluxe wiring harness included. BlingLights is one of the true leaders in the lighting industry. They produce Top notch lighting equipment. BlingLights lamps stand out as “lights with attitude”.

Priced at $67.99

Source [Amazon]

Greddy SP2 Exhaust System: Nissan Maxima SE (95-96) #6890

Product Features

GReddy SP2 Street Performance Cat-back stainless steel exhaust system for the 1995-1996 Nissan Maxima SE

SP2 Exhaust for SE Model ONLY / Pipe size 60mm / Tip size 115×110mm

Material – Stainless Steel

Finish – Polished

Installation Method – Replacement

Product Details:

In our classic Street Performance Ver. 2, or SP2, we have the ultimate in show quality shine, superior flow and excellent sound quality. The full stainless steel SP2 has the same classic tuned straight-though design as the other GReddy exhaust, with the add benefit of a high polished single walled SUS 304 oval muffler with SUS 430 end caps and a unique outer-curled oval GReddy slant tip. With applications for both turbo and normally aspirated cars, most SP2 follow the O.E. exhaust layout. With the use of large capacity straight-through mufflers and resonators, the SP2 offers some quietest exhaust note of any high performance systems on the market today.

Fits: Nissan Maxima SE (95-96)

Priced at $584.52

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)
• The brilliant MR2 Type ONO (0)
• The 2006 Honda Civic EX by Chester Yu (0)

Yet this Galant is one of the best, the owner has gone out of his way to create one of the best in the country. Does it succeed, well that is a question that needs to be answered by those people who are experts in the field, but having said that this is a naturally aspirated Mitsubishi Galant, most owners would have gone for a turbo, but not here. Yet this car produces 225 whp, which is not bad for a 3.5 litre engine.

SPECS

Engine: 6G74 swap (the first and unofficially still the only 3.5L 8g Galant in the country), RPW Stage 2 NA cams, RPW NA valve train, RPW Long tube headers, 3SX 95mm bore MLS head gaskets, CP 11:1 custom pistons, Magnecor 8.5mm wires, Disturbing Motorsports billet fuel rails, Xcessive Manufacturing Intake Manifold, Q45 Throttle Body, Aeroquip Starlite -6 hose (fuel), Aeroquip -6 AN fittings and hose ends (fuel), Aeromotive A1000 FPR, Aeromotive FPR gauge, Custom intake tube, BMW EURO M3 engine oil cooler, Aeroquip Starlite -8 hose (oil), Aeroquip -8 AN fittings and hose ends (oil), Permacool oil thermostat, Permacool oil filter adapter, CSF Radiator, Samco Radiator hoses, Greddy Oil Catch Can, Greddy Radiator type-S cap, Greddy Radiator Overflow Tank, Greddy Ti-C catback exhaust (still the only 8g with this exhaust), Energy Suspensions Solid motor mounts, Braille lightweight (11.5lb) battery and lightweight aluminium mount, Mishimoto slim radiator fans 12″x2, Fidanza adjustable cam gears, 3SX lightweight crank pulley, GT Spec water temp sensor adapter, Greddy e-Manage Blue, Greddy Injector harness, Greddy Ignition harness, Boomslang e-Manage patch harness, AEM UEGO wideband, AEM Digital Display oil pressure gauge, AEM Digital Display water temp gauge

Transmission: 5-speed transmission swap (transmission from a Dodge Stratus R/T), Fidanza 9.5lb aluminium flywheel, SPEC Stage 2 clutch, Zackley solid under hood aluminium shifter bushings, Megan Racing Short Shifter, Greddy counterweight shift knob, Kartboy shifter base bushings

Exterior: JDM VR4 front end conversion (old style), JDM 3rd Gen Tails, Custom CF trunk emblem, Custom CF trunk garnish

Interior: Autolite LED gauge cluster with dry CF face, Custom CF triple gauge pod bezel, Custom CF shifter bezel, 1st gen Talon shift boot

Suspension / Brakes: Ksport Kontrol Pro 32 way coilovers, Suspension Techniques 24mm sway bar (coated red), Kartboy STi swaybar endlinks, Lower Rear Tie Bar, Carbing Strut tower bar, Full EVO8 Brake conversion (front and rear), Stoptech slotted front/ rear rotors, Technafit SS Brake lines, PFC carbon metallic pads (F) Axxis Pagid pads (R), DOT 4 fluid

Wheels / Tires: Rota Boost (17×8.5 35mm offset), Dunlop Direzza Star Spec Z1 (225×45x17)

Source [Tunerzine]

OBX Blue Spark Plug Wire Set 00-05 Mitsubishi Eclipse/Galant 3.0L DOHC V6 6G72

Product Features

10.3mm heavy-duty quality construction 100% silicone double wrap

High strength fibreglass braid for added “pull strength”

Stainless steel plug terminals for high electrical conductivity and corrosion resistance

Backed By Manufacturer Limited Lifetime Warranty

(Product shown for colour reference only)

Product Description

OBX High Performance Spark Plug Wires are the highest quality and thickest wires available in today’s market. Six individually wrapped 18 strand copper cores are wrapped with a stainless steel conductor to ensure greater ignition current conduction and longer spark duration. The core is covered with a special synthetic dielectric compound that prevents all electrical leakage and arcing of the current due to microscopic cracks when aging occurs. Extra heavy duty glass braid is woven around to withstand extreme wire stretch from pulling. All of this is coated with an outer sheeting of silicone double wrap measuring 10.3 mm in thickness to withstand extreme engine bay temperatures.

OBX wires are compatible with all types and brands of spark plugs on the market today to increase voltage output and provide maximum combustion on today’s high performance engines. These wires have been dyno tested to significantly increase horsepower and torque on both stock and modified engines over OEM ignition wires.

Priced at $40

Source [Amazon]

2004-2009 Mitsubishi Galant Xenon Fog Lamps Lights 04 05 06 07 08 09

Product Features

(2) 55 Watt 4300K Lamps

10,000K LED Parking Light

Photometrically Designed Hardened Glass Lenses

Plug-In Wiring Harness + AMP & Relay Included + 3-Way Rocker Switch

Free Hat – Valued at $19.99

Product Description

Want to brighten up the horizon? The BlingLights line of high performance lights will do the trick. The BL-300w offers the performance and brightness of Xenon H.I.D. bulbs and have photometrically designed hardened glass lenses that pierce through the darkness in any weather condition. 90 degree beam pattern is both wide and far reaching, die-cast metal housing 55W H3 xenon 4300K white bulbs combined with 10,000K LED parking lights, 3.5″ D x 2 lamps, heavy-duty mounting brackets, 3-function switch, deluxe wiring harness included. BlingLights is one of the true leaders in the lighting industry. They produce Top notch lighting equipment. BlingLights lamps stand out as “lights with attitude”.

Priced at $67.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Naturally aspirated Mitsubishi Galant (0)
• Bill Stetson’s 2004 Dodge SRT 4 (1)
• A cool looking Mitsubishi Evo VIII MR 424 HP (0)
• “Z” is not always last (0)
• The Mazda RX7 the best of the best (1)

However, having said that, the underneath this Hyundai is plenty of power anyway so maybe Will is right here, he already has the car underneath him, so why work on that when you can make a beautiful looking car like this one. Even the colour is right with this car, some car look wrong with certain colours yet the custom three stage Lamborghini orange paint job is so right.

Hyundai Tiburon Specs:

Engine Modification – Unfortunately, the motor does not have much done to it except for an AEM intake system. A complete Power One exhaust system was installed to make her purr like a kitten

Suspension – air ride

Wheels, Tires, Brakes – tis wheels, 275-40-19

Exterior – custom three stage Lamborghini orange paint job, 3-d taillights and projection headlights to compliment its thirteen-piece body kit. There is an orange under glow kit installed with orange LED’s in the door handle to

Accent the colour at night

Interior – the interior has some custom orange paint work to match the outside of the vehicle. Sitting in the dash is a Sony HDD deck that plays AM/FM radio, CD’s, Mp3’s, and records discs onto its memory card equipped with a built in equalizer. Three T.V.’s were installed into the car. One being 5 inches sits in the passenger visor. The two others are 7-inch monitors mounted into the headrests. For the T.V.’s there is a Pyle DVD player mounted to the back of the back seat. Currently residing in the trunk is two 12-inch RE sub woofers by USA, a RE 2000-watt 2 channel amplifier also by USA to push the sub woofers, and a Orion 600-watt 4 channel amplifier to run the highs and lows in the vehicle. In the doors there are 5?inch factory Infinity speakers, the back seat has 6 x 8 factory Infinity speakers and also a set of factory tweeters in the doors. A 2 ferret Mobile Spec compasitor was mounted in to hold extra power for the amplifiers.

I.C.E. – Sony HDD deck that plays AM/FM radio, CD’s, Mp3’s, and records discs onto its memory card equipped with a built in equalizer. Three T.V.’s were installed into the car. One being 5 inches sits in the passenger visor. The two others are 7-inch monitors mounted into the headrests. For the T.V.’s there is a Pyle DVD player mounted to the back of the back seat. Currently residing in the trunk is two 12-inch RE sub woofers by USA, a RE 2000-watt 2 channel amplifier also by USA to push the sub woofers, and a Orion 600-watt 4 channel amplifier to run the highs and lows in the vehicle. In the doors there are 5?inch factory Infinity speakers, the back seat has 6 x 8 factory Infinity speakers and also a set of factory tweeters in the doors. A 2 ferret Mobile Spec compasitor was mounted in to hold extra power for the amplifiers.

Sponsors – as of 2009 powerbass

Numbers (WHP, 0 to 60 mph and etc.) – 230

Source [Carbon8 Mag]

Hyundai Tiburon 2003 – 2005 Red Carbon Fiber Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in a Red Carbon Fibre finish.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

“The material is soft, flexible and with a real weave texture allowing it to conform to the contours

“Thin, self-adhesive, vinyl film with a textured, Red Carbon Fibre weave finish.”

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a 3 mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $40.99

Source [Amazon]

2002-2008 Hyundai Tiburon Fog Lamp Kit hid lights 06 07

Product Features

Ø (2) Genuine Hella Brand 55Watt H3 Bulbs

Dimensions – 2.75 “H, 2.75 “W, 3 1/2″D

Photometrically Designed Hardened Glass Lenses

Wiring Kit With Relay, Fuse and Illuminated Switch

Free Hat – Valued at $19.99

Product Description

This listing includes a complete fog lamp kit for use on the model shown above without the factory fog lamps or as a replacement for existing factory fog lamps. This auction includes everything needed to install and requires no other parts or extensive modification. Hella offers the performance and brightness of Xenon H.I.D. bulbs and have photo metrically designed hardened glass lenses that pierce through the darkness in any weather condition. Round glass lenses, die-cast metal housing 55W H3 halogen bulb 2 3/4 inches in Diameter 2 lamps, heavy-duty mounting brackets, LED illuminated switch, deluxe wiring harness included. Hella is one of the true leaders in the lighting industry. They produce Top notch lighting equipment that is manufactured in Germany. Hella lamps stand out as “lights with attitude”.

Priced at $64.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The spectacular Nissan 350Z (0)
• The New World Samurai Integra Type R (0)
• The Mazda RX7 the best of the best (1)
• The Integra DC2 in a strange green colour (0)

According to the specs there has been plenty of work done on the car, in fact this car or rather the owner is currently looking for sponsorship. So if there is anyone or any firm out there that would like to see their company or product name on this car then why not get in touch with the owner Mike Gross.

The Evolution lends itself to being built into something special, it could be a standard family car otherwise, but you simply cannot image this car once being a taxi or a family run around. A car like this has to prove itself all of the time, of course there are those that ridicule the Evolution for reasons best known to themselves, what fools they must be.

Engine Modification

272 HKS camshafts; HKS Cam Gears; AMS FPR kit; Perrin Fuel Rail; Walboro 255fuel pump; HKS Suction intake; HKS Hi-Power Exhaust; Apex-I 3″Downpipe; Perrin Cat-delete pipe; Megan Racing stainless exhaust manifold; AMS small battery kit; Weapon-R engine dampener; Turbo XS intercooler;

AMS upper IC pipe; Tial 50mm BOV; RVM lower IC pipe kit; Cusco oil catch can; Turbo XS manual boost controller; carbon fibre fuse box cover, plug cover, and cooling plate; Weapon-R ignition equalizer kit; HKS oil cap; Greddy oil cooler kit; Samco Limited Edition Radiator Hose kit; Koyo Radiator; HKS D1 Special Edition 1.3 Bar Rad cap;

Avid Racing Motor Mounts; Weapon-R polished coolant reservoir; Rexspeed Carbon Fibre hood dampers

Engine Management

Vishnu Cannon -Ball Flash

Suspension

HKS Hipermax III, Dc Sports rear upper strut tower bar

Wheels, Tires, Brakes

18×9.5 Volk CE28N Time Attack wheels; Yokohama S.Drive 255/35/R18 tires, Stoptech slotted rotors; Hawk HPS front and rear pads; Agency Power brake lines

Exterior

C-West front bumper, carbon fibre canards, and eyelids; Seibon carbon fibre CWII hood; Seibon carbon fibre fenders (10mm wide); Voltex/Original Renduce side skirts; Gandor carbon fibre

mirrors; Seibon vortex generator; VIS carbon fibre trunk lid; INGS Hybrid Areo rear bumper; Tyrant carbon fibre J panels; MR tail lights; Smoked OEM side markers; R.A.X.; Perrin shorty antenna

Interior

Autovation heel guard; Scuff plate covers; Tyrant carbon fibre armrest cover; Carbon fibre

B pillar covers; Carbon fibre A pillar twin pod set (52mm); Apex-I S-AFC Neo; Defi-D boost gauge; AEM UGEO Wideband; Defi-D link control unit II V2; rally art pedal set w/ dead pedal; Carbon Fibre Center Consol

I.C.E.

Boston front components, rear deck speakers; Alpine 4 channel amp;

Eclipse 7″ touch screen w/ DVD player

Source [Carbon8 Mag]

OBX Red Overdrive Power Pulley Kit 03-05 Mitsubishi Lancer Evolution VII 4G63

Product Features

Super Lightweight T-6061 T-6 Aircraft Grade Billet Aluminium

Computer CNC Machined For Precision Balance

Increased Horsepower And Torque Across Entire RPM Range

Dyno-tested And Proven On Race Track

High Quality Polished & Anodized Finishes

Product Description

Designed to replace OEM accessory pulleys, OBX Overdrive Power Pulley Kits are designed to be lighter than the stock pulleys. By reducing the rotational mass, the engine uses less power to power accessories such as the alternator and power steering pump, which translates into more available horsepower and torque. This well-known and highly utilized process is known as reducing parasitic drag from power-robbing accessories.

Depending on application, some of our pulleys have a larger diameter than stock. By utilizing the process of over-driving, the accessory is utilized more efficiently by doing more work on a single spin of the pulley.

OBX Overdrive Power Pulley Kits are a great upgrade for any driver to realize the full potential of his or her prized vehicle.

Priced at $85

Source [Amazon]

Swift Sport Springs SPEC-R (Mitsubishi Lancer Evolution XIII/IX MR 2005+) 4M017R

Product Features

Drop (Front): -1.4 inches

Drop (Rear): -0.8 inches

Product Description

Swift made Sport Springs SPEC-R is made for true track racing enthusiasts that wants to take their vehicle to the next level. Sport Springs SPEC-R is engineered with two main characteristics: 1. Redesign lowering ride height to maximize the suspension performance allowing the vehicle to fully absorb road condition for maximum traction. 2. Increase in spring rate to further enhance cornering speed through entry & exit. The increase in spring rate is based on the vehicle factory stock valving settings. Sport Springs SPEC-R is increase to the optimal rate that the stock shocks can handle. Higher performance shocks are not required, but recommended. SPEC-R springs are wound with the same engineering as our sports springs. With the exception of stiffer rates and slight change in ride height; you can expect the same characteristics as our sports springs.

Priced at $314.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Lexus GS (Carbon GS) (0)
• The cool silver Subaru WRX (2003) (0)
• The brilliant MR2 Type ONO (0)
• The 2006 Honda Civic EX by Chester Yu (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)

This is a car from 2002 and has a bit of history behind in the World One Performance. Since then there has been a lot of changes to the car, on the outside it still has that classic bodywork, this has been highlighted with the addition of real race tyres and wheels, even though the rubber may have been a little worse for wear.

SPECS Performance: FP 18G (first gen, oil-cooled only), Perrin FMIC (first gen), Perrin short ram intake, Perrin turbo inlet, Perrin pulley, Modded stock injectors, One step colder plugs, HKS uppipe, HKS downpipe, HKS Hi-Power catback, Blitz Dual SBC boost controller, IMP radiator shroud, ECU tek tuned by PDX (282 whp, 270 ft/lbs tq)

Suspension/Brakes: H & R coilovers, Perrin front and rear sway bars, Perrin rear end links, Cusco front and rear strut tower braces, Stop Tech 328 x 28 mm BBK, Axxis Ultimate brake pads front and rear, STi hood scoop (genuine)

Exterior: C-West v2 front bumper (genuine), Charge speed side skirts (genuine), C-West rear lip (genuine), Kaminari CF rear spoiler, CF side markers, Koji-style headlights

Wheels/Tires: Prodrive P1 18×7.5 +53 5×100 Anthracite (winter/street setup), Michelin Pilot Sport AS 225/40/18 (winter/street setup), Advan TC-II 18×7.5 +48 5×100 Gold (show/summer setup), Yokohama S-Drive 225/40/18 (show/summer setup), Rays lug nuts

Interior: Embroidered headrests, STi JDM v7 gauge cluster, STi shifter trim, Omori EGT gauge in driver’s side vent Blitz DTT turbo timer

Source [Tunerzine]

TC SPORTLINE 02-06 SUBARU IMPREZA WRX TURBO BURNOUT CATBACK EXHAUST 3.0″ (FC19)

Product Features

INCREASE IN PERFORMANCE, 100% GRADE A STAINLESS STEEL MATERIAL CONSTRUCTION

O.E. REPLACEMENT, BOLT-ON INSTALLATION, SPECIAL DESIGNED HANGERS TO PREVENT SLIPPAGE

SPECIFIC PIPING DIAMETER SELECTED TO MATCH EACH VEHICLE’S PERFORMANCE LEVEL, COMPACT MUFFLER DESIGN FOR REDUCING WEIGHT

SPECIAL SOUND DAMPENING MATERIALS TO REDUCE NOISE AND PRODUCE DEEP THROATY NOTE WITH REMOVABLE SLIENCER

4.0″ ZEN STYLE EXHAUST TIP FOR SPORTY APPEARANCE, 3.0″ PIPING FOR INCREASED EXHAUST FLOW

Product Description

Burnout series exhaust systems consist of many catback and axle back systems for various import and domestic sports compact vehicles. Designed to be O.E. replacements, each system bolts onto the original mounting locations with uniquely designed hangers that prevent slippage. With 3.0″ catback piping, it allows for increased exhaust flow throughout the RPM range without losing too much back pressure at lower RPM. Sporty Zen style muffler features compact canister with 4.0″ muffler tip. Special sound dampening materials inside the muffler canister facilitate deep and low throaty exhaust tone and increase low end torque for street use. Made of 100% grade A stainless steel material, the burnout exhaust systems are not only attractive in appearance but they also have high durability.

Priced at $159.20

Source [Amazon]

High-Performance Subaru Builder’s Guide: Includes the Impreza, Legacy, Forester, Outback, WRX and STI (S-A Design) (Paperback)

Paperback: 144 pages

Publisher: S-A Design (August 15, 2007)

Language: English

ISBN-10: 1932494510

ISBN-13: 978-1932494518

Product Dimensions: 10.9 x 8.5 x 0.5 inches

Product Description

Now more than ever, Subaru fanatics have a wealth of factory and aftermarket performance upgrades at their disposal. In High-Performance Subaru Builder’s Guide, author Jeff Zurschmeide explains in detail the similarities and differences between the Subaru models, and describes how to modify each for performance on the street and at the track. He uses over 300 colour photos to show you how to modify your Impreza, Legacy, WRX, or STI for improved acceleration, handling, braking, and style. The book provides detailed chapters explaining how to modify the intake, exhaust, turbocharger, and computer systems for more horsepower and torque–plus info on upgrading your drivetrain to handle all that power. If taking corners is your thing, you’ll find chapters on the suspension, steering, chassis, brakes, and wheels and tires. A special chapter even shows you how to get started in your favourite type of racing, including examples of successful racers and their cars.

Book Description

Now more than ever, Subaru fanatics have a wealth of factory and aftermarket performance upgrades at their disposal. In High-Performance Subaru Builder’s Guide, author Jeff Zurschmeide explains in detail the similarities and differences between the Subaru models, and describes how to modify each for performance on the street and at the track. He uses over 300 colour photos to show you how to modify your Impreza, Legacy, WRX, or STi for improved acceleration, handling, braking, and style.

Priced at $18.21

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The cool silver Subaru WRX (2003) (0)
• 2002 Subaru Impreza WRX – Born Again (0)
• Subaru Impreza WRX the first super Subaru (0)
• The wide body Scion xB of Mobil 1 (0)
• The New World Samurai Integra Type R (0)

A car like this is bound to attract a lot of attention, which is probably one of the reasons why the company picked in the first place. That is because something odd and strange looking is bound to get a lot of press and fan attention at the shows and it does that, with is wide body that makes it look less boxy but closer to the ground, this Scion xB is something special even though it may look a little strange from some angles.

SPECS – Mobil 1 Scion xB Specs:

Exterior: BRS Auto design front bumper, BRS Auto design side skirts, BRS Auto design rear bumper, BRS Auto design wing, BRS Auto design front fenders, BRS Auto design vented hood, BRS Wide body kit was Designed for BRS, by Robert Kovacs and Leigh Guarnieri, Seibon carbon fibre OEM hatch, custom paint by BASF, custom paint by Platinum VIP in Baldwin park

Interior: Status Carbon Fibre Ring Racing Seats, NRG Carbon Quick Release, NRG Steering wheel, NRG Harnesses, Auto meter Gauges, World Electronics TBC-1 Boost Gauge, Custom 6 point Roll Cage, Stitch Welded Chassis, Traction Bars, Full 4 Link Rear Suspension, custom radiator and fuel cell mounts

Engine: Toyota Tundra 4.7 engine swap by Bucky Fellini and Juni of JRX engineering, Mobil 1 Fluids, Brian Crower Custom Cams, Peak Boost Intake Manifold, ACL Bearings, Calico Coatings, ERL Assembled Block & Oil Pump, Custom Brian Crower Rods, JE Pistons, Darton MID Sleeves, Twin Garrett Turbo GT35R, Tial 44mm Wastegate / 50mm Blow-off, Phoenix Turbo / Peak Boost Custom Turbo System, Nitrous Express 100 Shot Nitrous and Intercooler Spray, JAZ Products 12 gal Fuel Cell, Aeromotive Fuel Pump, BDL Fuel Filter, BDL Fuel Rail, BDL Throttle Body, BDL FPR, RC 1000cc Fuel Injectors, Mishimoto Racing Aluminium Radiator, Tuned by Church’s Automotive

Wheels/Suspension/Tires: 20″ VIP Modular 3 piece Wheels, Toyo tires, Eibach front/rear coilovers, sway bars, Wilwood big brake kit, front and rear, Driveshaft Shop Hubs and Moser Axles, and a Currie 9″ rear end

In Car Entertainment: Pioneer head unit, full sound system Memphis Car Audio installed by DMR

Source [Tunerzine]

Scion Xb 2004-2004 MB5 Chrome Wheels Rims and Tires

Product Description Tire: Nankang NS II 215/35R18  84W

General: The MB5 â Warrior From The Dark Ages. Unlike its spoked brethren, the MB5 is not a rim with a spoke design but a semi full-faced wheel. This Rim is designed in a way that makes it look like a shield that the warriors of the dark ages used in the ancient times of barbaric wars and competitions. This rim comes in a dark tanned finish and is machined polished to a perfect black tan. The lighter version of the rim is more inclined to a silver finish and goes well with the tire of the car. The black version matched the tire and the silver version contrasts with the black tire. Towards the outer ends of the wheel, where the broad spokes meet the rim, the design forms a seemingly three-sided half ellipse that is carved into the face of the rim. The centre of the rim is held fast to the rim with eight Allen nuts and covers the central coupling of the wheel entirely. This cover fits flush with the rest of the rim leaving no need for a hubcap that older car rims require to hide the ugly cast iron wheel and huge coupling bolts. Though the face of the wheel is black, the ring that forms the outer circle of the wheel and holds the tire in place is silver giving the wheel and the vehicle a very classy look. When purchasing Wheels and Tires Package, Package includes: style=”margin-top: 5px ;”> Balancing and Mounting Lug Nuts Hub Rings 4 Centre Caps

Priced at $350

Source [Amazon]

JP 2004-2005 Scion xB 4-pc full body kit accessories

Product Features

JP 2004-2007 Scion xB Front Type C Grill

Front Grill Type C Only, Body kits not included

Style – Complete Kit

Product Description

Scion xB Auto Body AccessoriesJP Scion xB ground effects (Fibreglass Body Kit) JP (Japan Products) Corporation is one of the oldest and largest aerodynamic body kit manufacturers in Japan. Since 1970, JP Corporation has worked with various OEM (Original Equipment Manufacturer) companies in designing and manufacturing aero kits using the latest fibreglass material. JP Corporation is known for affordability and ultra-high quality material that has been proven by many major auto manufacturers in the last 35 years. That makes us the leader and #1 in the Japanese Aero industry. Catch the looks while you are driving your ride. Manufactured by JP, this Scion xB body kit is top quality and high class. Tough-as-nails fibreglass construction guarantees that your JP Scion xB body kit is as durable as it is stylish. Order your JP ground effect kit now! Scion xB body parts are custom made and usually take five to eight days to produce in the factory. Total delivery time is 10-15 business days. Order your JP Scion xB ground affects Fibreglass Front Grill (Scion xB Full Ground Effect Body Kit) now! Easy online ordering!

Priced at $162

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Boise Auctioneers 2006 Scion XB (0)
• Honda Civic Si from 2000 (0)
• Cool looking Scion XA (0)
• Acura Integra LS by Kai Lung (1)
• Totally cool looking Acura Integra (0)

But that is not necessarily so, the idea of showing your masterpiece off maybe slightly worrying, but you have to think that many of the critics would not know one end of a socket from another. As with all art, the critics are not necessarily artists themselves. These days those people who build cars, encourage other owners to do the same, they offer advice, and they may not, but it the building that makes all of the difference.

Owner: Robert O’Brien

Ride: ‘03 Nissan 350Z Twin Turbo

Location: Texas

Mods: Jim Wolf Technology 700BB twin-turbo system, Swain Tech BBE-coated front-mount intercooler, HKS SSQV, Auto Technic carbon-fibre shroud, JWT Pop Charger with heat shield, ARC V2 oil catch can, Koyo oversized radiator, Samco blue hoses, Cosworth intake manifold (polished), UR underdrive crank pulley with Gates Belts, DeatschWerks 600cc injectors, NGK iridium IX one-step colder spark plugs, Braille 15-pound carbon-fibre battery with Braille battery mount, carbon-fibre battery and brake fluid covers, Stillen oil cooler with thermostat, Walbro 255lph fuel pump, APS 2.5-inch test pipes, Stillen TD cat-back ZR single tips, TurboXS UTEC, TurboXS Tuner wideband with Bosch O2 sensor, TurboXS DTEC map sensor, Perrin boost solenoid, ARC oil cap, ARC radiator cap, TEIN hood dampers, Project Kics magnetic oil plug, JWT clutch, JWT flywheel, AP stainless steel clutch line, Aerosync carbon-fibre strut tower brace, GTSPEC fender braces, GTSPEC four-point mid chassis reinforcement brace, GTSPEC Rear Tie Braces, GTSPEC rear lateral arm, Hotchkis Stage 1 TVS kit (lowering springs, adjustable sway bars, bushings, and brackets), StopTech big brake kit (front: 14-inch four-pot silver caliper; rear: 13-inch two-pot silver caliper), slotted zinc coated with black hat rotors, Work Meister S1 three-piece 19×9.5 (front), 19×11(rear), Yokohama Advan Sport 255/35-19 (front), 285/35-19(rear), Ichiba Spacers: 5mm (front), Project Kics R40 racing lugs with locks, Intense Power front lip, Stillen street scene grille (painted flat black), JDM Nissan smoked markers, Nismo horns, 6000k D2R bulbs, AUT carbon-fibre Z emblem filler, 15 percent tint, Varis carbon-fibre B-pillars, Perrin Shorty antenna, removed rear wiper, JDM Fairlady Z emblem, rearview radar detector mount, Bel RX65 laser/radar detector, dual pod A-pillar, Defi-Link control unit, Defi-Link 60mm BF Series gauges (Imperial units and white), boost gauge, fuel pressure gauge, Defi-Link display, Defi-Link oil temperature sensor, Defi-Link water temperature sensor, Defi-Link indicator II, Nismo Ti shift knob, TurboXS UTEC map switch, Clifford Matrix 12.5X, Pioneer AVIC-D3X DVD/Navigation with Bluetooth and iPod control, XM NavTraffic Satellite Radio, JL Audio C5-650 components, JL Audio TR650Cxi rear speakers, JL 500/5 (100×2 components, 25×2 rear, 250×1 sub), JL Audio 10W3v3 subwoofer, 350Z corner box, rear license plate camera, Seibon carbon-fibre TS-style hood, Seibon carbon-fibre TT-style rear lip

Future Plans: Nismo V2 front fascia and side skirts, Mastergrade carbon-fibre rear hatch, Tanabe Sustec Pro Seven coilovers with TEAS electronic active suspension controller, and 18-inch Volk Racing RE30 wheels with R-Compound tires.

Source [Turbo Magazine]

Nissan 350Z 2006 -2008 Dash Trim Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in Radical Red.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

Thin, self-adhesive, vinyl film with a Radical Red finish.

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a three mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Nissan 350z REMOTE Engine START Factory OEM Add-On

Product Description

ADD REMOTE START TO YOUR FACTORY KEYLESS ENTRY / ALARM!!!

DESIGNED WITH PRIDE IN THE USA!!! SUPPORT AMERICAN JOBS!

The competition sells cheap IMPORTED remote starts that are LOW QUALITY and have NO WARRANTY. This kit comes from Stellar (the best remote start manufacturer in the world) and has a limited LIFETIME WARRANTY from the factory, as well as TOLL-FREE TECH SUPPORT for any questions.

The RS1050 WORKS WITH YOUR FACTORY KEYLESS SYSTEM. This will allow you to use your existing keyless entry remote controls! JUST HIT THE “UNLOCK” BUTTON ON YOUR FACTORY REMOTE 3 TIMES AND YOUR VEHICLE STARTS RIGHT UP!!! SAVE HUNDREDS $$ ON YOUR INSTALL!

With Tach-Less Installation, there is no need to install a wire to you tachometer. An Anti-Grind feature plus adjustable Crank Time eliminates wear and tear on your starter.

This kit will work on BOTH manual and automatic transmissions. (It has an input for the parking brake for manual vehicles that will not allow the unit to engage unless the parking brake is on)

The RS1050 works on ALL DIESEL vehicles and features system self diagnostics which will notify you if the system has been installed improperly. The RS-1050 kit also includes plug in LED, Valet button, and wiring harness. Stellar’s RS-1050 is Made in the USA and comes with a Limited Lifetime Warranty.

Parking Light Output: Stellar Alarms offer a built-in parking light relay. This allows the unit to flash the parking lights once on lock and twice on unlock. This visual conformation ensures your vehicles safety.

VATS & PATS Bypass Output: Reduces installation time because the RS1050 is compatible with all bypass modules.

Diesel Mode: Get Started! The RS1050 remote start feature is compatible with diesel engines.

Anti-Grind Feature: Tired of hearing a grinding noise with after-market remote starters? The RS1050 eliminates starter grinding on your vehicle.

Made in the USA

Priced at $99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• Richard Andrews Nissan 350Z (0)
• The spectacular Nissan 350Z (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)

What this one requires is some sponsorship, of course, that is the dream of a lot of car owners out there, but you have to admit it that this is a car worthy of some work. The main thing about this car is that it is a blank canvas and the owner needs the sponsorship in order to sort out the bodywork and a get a decent paint job done, not a major job is it (Joking) but it is worth doing.

Engine Modification – APS Single Turbo, Tial 38MM ext wastegate, Motordyne 5/16 Isothermal Plenum Spacer, Fujitsubo Exhaust, GTM Oil Cooler, GTM Dyno & Tune.

Engine Management – HKS F-CON V PRO, HKS Knock AMP, Blitz Throttle Controller, Greddy E-01 Boost controller.

Drivetrain Modification – Exedy Stage 1 Clutch

Suspension – Tanabe Sustec PRO 5 coilovers, Tanabe TEAS controller

Wheels, Tires, Brakes – Grams Light 57 max 18×8.5F 18×9.5R, Endless CC-A pads, SS brake lines.

Exterior Modification – GT-R style Front bumper, K-Style Rear bumper, Wonderous Side skirts.

Interior Modification – none

I.C.E. – JL W3 12” SW

Sponsors – None (looking for some to help out with body work and painting…)

Numbers (WHP, 0 to 60 mph and etc.) – 362 WHP/ 361 Torque @ 7lbs of boost. 385 WHP/ 383 Torque @ 9lbs of boost.

Others – Looking to build the bottom end and get a bigger turbo put on.

Source [Carbon8 Mag]

WeatherTech 441562 FloorLiner

Product Features

Accurately/Completely Lines The Interior Carpet

High-Density Tri-Extended Material

Rigid Core Strength, Offers Surface Friction

Advanced Surfacing Minimizes Fluid Movement

Fluids Easily Removed Once They Are Trapped

Product Description

In the quest for the most advanced concept in floor protection, the talented designers and engineers at MacNeilAutomotive have worked tirelessly to develop the most advanced DigitalFitTM floor protection available today! The WeatherTechFloorLiner¿ accurately and completely lines the interior carpet giving “absolute interior protection¿”! Digital laser measurements of interior surfaces offer a consistently perfect fit! A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTechFloorLiner¿ over the door sill…no muss-no fuss! Rear FloorLiners¿ incorporate many of the same design features as the front FloorLiners¿. Rear FloorLiners¿ (where offered) are manufactured from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under temperature extremes. FloorLiners were designed for vehicles with factory carpet installed when manufactured.  They will not fit vehicles with vinyl floors unless otherwise specified.  Please take your old floor mats out before installing your new WeatherTech floor mats. Please note that the on-screen colour representations are not necessarily precise representations of actual product colours due to variance in monitor calibrations.

Priced at $74.95

Source [Amazon]

Megan Racing Coilover Damper Kits – Track Series: Nissan 350Z/Infiniti G35 #11566

Product Features

Application: Nissan 350Z/Infiniti G35 03-08 All

Spring Rate: 10kg Front and 8kg Rear

Product Description

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 Levels of damper force adjustment, full-height adjustment, these damper kits are then perfectly matched with front and rear Pillow Ball upper mounts for camber correction in most applications.

The adjustment of the damper is as simple as can be with a built-in knob at the top of the damper mount for easy access. Simple adjustments can be made to tune to your style of driving and comfort level desired. Single-Adjustable dampers make suspension adjustments easy to tune whether you are a professional mechanic or an automotive enthusiast with amateur mechanical skills.

The height adjustment is made easy with CNC-Machined locking perches for accuracy and smooth adjustment. You can raise your car up to factory height for OEM appearance with performance handling or you can drop your car all the way down for a formal racetrack and an aggressive stance lowering your center of gravity to gain full potential of your car s handling capabilities.

On most applications, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mounts to easily tune and adjust your camber. Adjustable camber gives you an edge on most suspension setups, as you can easily tune your car for any ride height which improves handling, predictability and furthermore tire wear, which is a great benefit both on the racetrack and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

- Spring Rates: 10kg Front and 8kg Rear

- 32 Levels of Adjustable Damper

- Rubber D

Priced at $1,100.60

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Great looking G35 Coupe (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)

It may be black, which may not be the best of colours for a build but it is pure and dark, in fact is as dark as it could possibly be. However, at the same time it is cool, you can still see that it is Lexus and there has not been too work done to the bodywork, leaving the car with its original styling.

This is one of those cars that you could make if you had an unlimited budget and access to all of the car parts that your heart desired, but as a lot of us are not in that position, we simply have to look and marvel at this work of art. Maybe one day a few more of use will be in the position to make a car such as this.

SPECS Exterior: Revolution Modified Style Front Bumper, Revolution Style Rear Bumper, VIS Carbon Fibre DV Vented Hood, VIS Side Skirts, Junction Produce Replica Spoiler (Centre Carbon Wrapped), Custom Carbon Fibre wrapped UGO Roof Spoiler, Custom Carbon Fibre B-Pillars w/Emblems, Custom Carbon Fibre Grille, TRD Toyota Aristo Vent Visors, CCFL Daytime Demon Eyes (AAC), Painted Black Headlight Housings, Cleared Turn Signals, Shaved Side Markers, Hyper Blue Turn Signal Bulbs, 9000K HID Kit McCulloch’s Ballasts, Hella 9006 12V HID Bulbs, Street Glow White Under Car Neon Kit, Authentic TRD Gas Cap Cover, Lexus IS300 Retrofitted Fog Lamps, Aristo Carbon C-Pillar Garnishes

Interior: Swapped Interior, Converted Black Seats, Hayame Carbon Fibre Pedals, Pilot Carbon Weave Shift Boot and Knob, Custom Carbon Fibre Wrapped Trim

Electronics: 12″ Kicker L7, Custom Ported Wall, 2000 watt Power Acoustics Amplifier, Pioneer Avic-D3, Lightning Audio 2 Farad Capacitor, Eclipse Component Speakers, Pioneer Tweeters, I-Pod Interface, Lowrance I-Way 800 Navigation System, Audiovox Remote Starter/Alarm, PlayStation 2 Slim

Engine: Swift Racing Technologies Cold Air Intake, Swift Racing Technologies ECU Upgrade, Swift Racing Technologies Heat Shield, Customized Remus Style Exhaust, Paul’s Custom Exhaust Piping – Header back, Polished 2JZ-GE Intake Manifold, Polished Helix Radiator Hose, Pro Lex Performance Exhaust Manifold Heat Shield, Custom Aristo Cam Gear Cover

Suspension/Wheels/Tires/Brakes:

20″ x 9″ +37 EXE Konvex Wheels Front, 20″ x 10″ +35 EXE Konvex Wheels Rear, Dunlop Sport Maxx Tires, 245/35/20 Front, 285/30/20 Rear, NA/T Supra Brake Calipers Front, SP Cross Drilled/Slotted Rotors Front, Painted Rear OEM Calipers, Axxis Semi-Metallic Pads, BFG Steel Braided Brake Lines, K-Sport Coilovers, TC-Sportline Upper Strut Bar

Achievements

2006: A Family Affair-05′ 1st Place Lexus, Ignition Show-06′ 2nd Place Import, TMV Show-06′ 1st Modern Luxury, Joker Performance S.A.D.D.-06′ 1st Import Mild, Berry Motor Works Show-06′ 1st Mod. Lux. St., S.I.D.S Show-06′ Top 10 Imp. Mild, Megamaxx Show-06′ 1st Full-Size Mod. Lux., Redline Invitational-06′ Triple Crown, Redline Invitational-06′ 1st Import Sedan/Wagon, Welch Show-06′ Top 15 Import Mild, Modhouse Tribute-06′ Top 50, Tunerfest Shootout v3.0-06′ Top 20 Import Mild, S3 Magazine Show Top 10 Mild, Elite Audio Summer Nats-06′ 2nd Overall Luxury, Soundproof Audio 09-06′ 1st Mid-Size Foreign, Nopi Nationals 9-06′ 2nd Asian Luxury Custom, Carrollton Car Stereo 9-06′ 1st Full Size Foreign, SCC Autofest-06′ 3rd Overall Luxury, Lamar Stephens Invitational Best Mild Entry

2007: World of Wheels – Atlanta – 1st Euro Style Sedan, Joker Performance – Hooter’s – 1st Import, Children’s Miracle Network – Charity Quizzno’s – Best Of Show, Meggamaxx – 1st Full Sized Foreign, DUB Memphis – 2nd Luxury, The Main Event – Trinity Show – Best Luxury, U.S. Play by Brunswick Car Show – 2nd Full Sized Foreign, U.S. Play by Brunswick Car Show – Best Display, Tunerfest 4 – Top 10 Mild, Soundproof – Best Fullsize Foreign, Drift Fury – Top 10, Nopi Nats – 1st Asian luxury Lexus GS/LS custom, KIA Partnership Against Domestic Violence – 1st Import, Street Stylze/Hooters – 3rd Import Wild

2008: World of Wheels – Atlanta – 2nd Euro Style Custom (I.S.C.A.), World of Wheels – Chattanooga – 1st Euro Style Custom (I.S.C.A.), World of Wheels – Birmingham – 1st Euro Style Custom (I.S.C.A.)

Special Thanks To:

Companies: Tunerzine, Dunlop Tires, Flynn’s Wax, Advanced Automotive Concepts, Superstar Customs, AD Signs, Zen Motorsports, Invisible Glass, R2B2 Motors, B.O.D.I Performance, Precision Audio, Paul’s Custom Exhaust, Changaroo Photography

Forums: EliteDriven.com, SouthSideImports.net, Lexotic Concepts, ImportAtlanta.com, SELOC.net, ClubLexus.com

Source [Tunerzine]

97-2005 LEXUS GS LED FOG LIGHTS LAMPS gs300 gs400 gs430

Product Features

(2) 55 Watt 4100K Xenon Lamps

Built-in 10,000K LED Parking Lights

3 Function Rocker Switch

Plug-In Wiring Harness + AMP & Relay Included

Free Hat Valued at $19.99

Product Description

This auction includes a complete fog lamp kit for use on the model listed in this auction without the factory fog lamps or as a replacement for existing factory fog lamps. This auction includes everything needed to install and requires no other parts or extensive modification. The BL-300w outperforms regular fog and driving lights in any weather condition. 90 degree beam pattern is both wide and far reaching, die-cast metal housing 55W H3 xenon 4100K white bulbs combined with 10,000K LED parking lights, 3.5″ lamps, heavy-duty mounting brackets, 3-function switch, deluxe wiring harness included. BlingLights is one of the true leaders in the lighting industry. They produce Top notch lighting equipment. BlingLights lamps stand out as “lights with attitude”.

Priced at $67.99

Source [Amazon]

EZ Cover Car Cover 1993-2005 Lexus GS300 4-dr

Product Description

Finally – A Car Cover That is Easy to Use AND Easy to STORE!

The EZCOVER is unlike any cover before it. This car cover is so easy to use you will wonder how you ever got along without it. The case allows the cover to be stored in an area that takes up less then 1.5 ft of space.

The EZ Cover Car Cover is also incredibly easy to put on your car or SUV. No more fumbling to find the front of the car cover. The front of the cover ALWAYS comes out first. Once the cover is on the car, simply store the case in the trunk with the attached string. The Reel In case allows you to keep your clothing clean while removing the cover because the cover never has to touch your clothing! Best of all the cover Reels back into the case in about 30 seconds, making storage a snap!

Priced at $109.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Evolution VIII by Mike Gross (1)
• The brilliant MR2 Type ONO (0)
• The Boise Auctioneers 2006 Scion XB (0)
• The 2009 Lexus IS by Brian Fox (0)
• The 2006 Honda Civic EX by Chester Yu (0)

As you can see from this cool blue Honda Civic Si, there has been some major work been carried out on it, both inside and out. You do not get to this stage without having plenty of cash and commitment to the project, but the rewards are seeing the car finished and reactions from other people as they look at it.

This is another car that has the hood blacked out; it is cool to see that as it such a bold move, some people would not like it at all, but on a build such as this it simply has to be done. The first site of this car you would not know how much effort has gone into it, but as you get closer those little touches are clearly visible.

As with anything else, the proof is in what the car can actually do, this will go over the quarter mile, you are talking about a mere 14.6 seconds, which is great for this car or any car in the same category.

Engine Modification – aem v2 cai, buddy club rapped headers, golden eagle fuel rail, AEM fuel pressure regulator, rpm 70mm throttle body, type r valve springs and retainers, je pistons 10:1 compression, eagle turbo rods, spoon absorbers, mishimoto radiator, type r valve cover, type r strut bar, nrg engine stabilizer, skunk 2 cam gears

Engine Management – hondata s200 with boost option

Drivetrain Modification – b16 tranny with LSD

Suspension – tokico illumina with skunk 2 coilovers

Wheels, Tires, Brakes – volk racing time attack ce28n black with red lip, nitto neojen tires, OEM brakes and calipers with project mu pads

Exterior – seibon cf hood, seibon cf first jen mugen lip, ctr headlight with 10k h.i.d, spoon mirrors, jdm honda window visors, golden eagle towhook, yellow fog lights

Interior – del sol gray stripe seats with stock seats in back, nrg quick release, jdm type r airbag tray, mugen shift knob, carbon fiber ebrake handle

I.C.E. – Kenwood DDX8017 ?Kenwood KNA-DV4100, JL Audio XR650CSi 6.5 Component Speakers, JL Audio VR650CXi 6.5 Coaxial Speakers, JL Audio 300/4 Amplifier

Sponsors – acme2 motorsports, LDL speed shop

Numbers – quarter mile- 14.6@109

Source [Carbon8 Mag]

Yellow OEM SPEC. Fog Light – Honda Civic SI 3-Door 2002-2005 (With Wiring Kit)

Product Features

OEM specification

Plug and play no modification

Wiring harness

On-off switch

Light bulbs included

Product Description

Fog functions in providing a wider beam pattern to illuminate below the normal line of sight to reduce reflected light. Good set of fog lights in your car helps you see better when driving in adverse weather conditions. Because great visibility is needed to achieve driving safety, equipping your vehicle with highly efficient fog lights is vital. Aside from being a functional component, fog lights also add to the aesthetic look of your car. The OR fog light can give your car the customized look and appeal that you want. As the part adorns the front edge of your vehicle, leaving much better and appealing impressions for your cars presence will be simple. Continually enjoy superior ride and driving experience with a stylish ride by employing quality fog lights. Cutting edge technology and engineering has been incorporated in the product design to enable it to offer reliable service life that lasts. Heavy duty materials are incorporated in the product that allows it to offer efficient performance for miles and miles of driving.

Priced at S77.36

Source [Amazon]

OBX Blue Silicone Radiator Hose for 96-00 Honda Civic (non-Si ONLY)

Product Features

Made of 100% pure silicone with a multi-layer nylon wrap

Pressure and heat resistant from -165° to 350° Farenheit

Available in a range of colours to match any engine bay colour scheme

Direct replacement and perfect fit for stock OEM rubber radiator hoses

Product Description

OBX Pure Silicone Radiator Hose Kits are a the perfect way to dress up an engine bay while upgrading the cooling system to handle high heat and pressure situations.

Made from 100% pure silicone, OBX radiator hoses are pressure and heat resistant to -165° to 350° Fahrenheit. These hoses are available in a range of colours to match any show car’s engine bay colour scheme.

Priced at $45

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The cool old school Honda Civic Si (0)
• The Honda Civic DX project (0)
• The 2006 Honda Civic EX by Chester Yu (0)
• The 1990 Honda Civic of Eric Britton (0)
• Honda Civic, is it cool! (0)

This is a project that has been built for the look rather than speed, after all you simply couldn’t imagine this car ripping it up down the track, unless it was in the special Scion drag race over a quarter of mile, if we wait that long of course!

They may be strange looking, but the way that the car has been coloured is sheer brilliance. Green is considered unlucky for some people, but green really works with this. Whether the colour goes with the shape or just that, the colour is so nice. It sets the whole car off and obviously makes the car stand out from the crowd.

Modifications Engine:

K&N Typhoon Intake

Magnaflow Exhaust

Strup Header

Perrin pulley

Suspension:

Tein H-Techs

DC Strut Bar

Megan H brace

Koni Yellows

Interior:

RS 3.0 Head Rest monitors

Alpine DVD player Head unit

Interior Green Cathodes

Hydro-dip.com accent pieces

xbox

mac mini

Exterior:

Ichikoh JDM Headlights

JDM Window Visors

Yakima Roof rack

Yakima Load warrior

Sonar Tail Lights

X2 Lip Kit

Audio:

Elemental Design 9.1

Running a 190v.2 HUGE 18″ Sub

0/1 Gauge Wiring!!!

Boston Acoustic speakers

Wheels & Tires:

Monarch Nilo’st

205/50/r16 Yokohoma

Future Modifications:

DONE!

Car Clubs:

Scikotics

Source [Tunerzine]

Scion Xb 2004-2004 MB5 Chrome Wheels Rims and Tires

Product Description

Tire: Nankang NS II 215/35R18  84W

General: The MB5 â Warrior From The Dark Ages

Unlike its spoked brethren, the MB5 is not a rim with a spoke design but a semi full-faced wheel. This Rim is designed in a way that makes it look like a shield that the warriors of the dark ages used in the ancient times of barbaric wars and competitions. This rim comes in a dark tanned finish and is machined polished to a perfect black tan. The lighter version of the rim is more inclined to a silver finish and goes well with the tire of the car. The black version matched the tire and the silver version contrasts with the black tire. Towards the outer ends of the wheel, where the broad spokes meet the rim, the design forms a seemingly three-sided half ellipse that is carved into the face of the rim. The centre of the rim is held fast to the rim with eight Allen nuts and covers the central coupling of the wheel entirely. This cover fits flush with the rest of the rim leaving no need for a hubcap that older car rims require to hide the ugly cast iron wheel and huge coupling bolts. Though the face of the wheel is black, the ring that forms the outer circle of the wheel and holds the tire in place is silver giving the wheel and the vehicle a very classy look. When purchasing Wheels and Tires Package, Package includes: style=”margin-top: 5px ;”> Balancing and Mounting Lug Nuts Hub Rings 4 Centre Caps

Priced at $350

Source [Amazon]

Scion xB Radical Red Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in Radical Red.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

Thin, self-adhesive, vinyl film with a Radical Red finish.

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a three mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The wide body Scion xB of Mobil 1 (0)
• The Lexus GS (Carbon GS) (0)
• Cool looking Scion XA (0)
• The Mazda RX7 the best of the best (1)
• The brilliant MR2 Type ONO (0)

It is the hood that makes all of the difference with this car, being able to see the engine working while it is moving is something else. The thing about these cars is that so long as they are prepared properly the rest will follow.

This Acura need nothing more doing to it, in fact once a car like this has been completed age make no difference it is a timeless design that will never go out of fashion. It has lines that cars of today will never have.

The owner Kai Lung has a good sense of what he wants from this car, looking good is all that matters. That is a great idea and a perfect way of being involved with import building. Some people go for performance, but that means spending too much time and money on the moving parts.

Engine Modification

* 1995 B18C1 Engine Swap

* Skunk2 Stage 1 Camshafts, Cam Gears, PRO Intake Manifold, Oil Cap, Radiator Cap, Battery Tie Down

* Edelbrock Integra Type R 65mm Throttle Body

* Password JDM Power Chamber w/K&N Filter, AEM Hose Clamps

* DC Sport 4 to 1 Ceramic Coated Header w/JDM 2.5 inch Collector

* Custom 2.5″ SS Midpipe w/ Vibrant Performance Resonator

* APEX-i World Sport Rear Muffler

* USDM Integra Type R Valve Cover, Throttle Cable Bracket, Throttle Stay

* Vision Technica Sport CF Spark Plug Cover

* STR/BDL Fuel Rail, Cam Seal

* Silver VTEC Solenoid Cover

* RC Engineering 310CC Injectors

* B&M Command Flo Adjustable Fuel Pressure Regulator w/Fuel Pressure Gauge

* Top Fuel Power Neo

* Hondata Intake Manifold Gasket

* King Motorsports Stainless Extended Intake Manifold Stud Kit

* Magnecor Custom Length Spark Plug Wires

* Ultra MDI Ignition System

* Custom Fibreglass Distributor Cap

* Moroso Oil Pan

* ARP Crank Pulley Bolt, Flywheel and Clutch Bolts

* Driveshaftshop.Com Stage 1 Axles

* Spoon Sport Magnetic Engine/Transmission Drain Bolts

* Hasport Rear Engine Mount

* Energy Suspension Motor Mount Inserts

* Custom Polished Stock Engine/Transmission Mounts

* Samco Sport Radiator Hose Kit

* Semi Polished Engine block

* Buddy Club Racing Spec Battery

* Fluidyne Radiator w/FAL Fans

* JDM Si-VTEC VIN Tag

* Spoon Sport Radiator Stays

* Custom Non-AC Front Engine Support Bracket

* Gloss Black Powedercoated Battery Tray

Engine Management

* Neptune By Evan’s Tuning

Drivetrain Modification

* USDM Integra Type R Transmission (Built in 01/15/07)

* ACT AI4-HDSS Clutch Kit w/Streetlite Flywheel

Suspension

* Tokico Illumina 5 Way Adjustable Struts

* Eibach Sportline Springs

* Omni Power Front Lower Control Arms, Front Cross member titanium bolt kit

* Cusco Type ALC 40 Carbon Front Strut Bar

* Skunk2 Lower Rear Control Arms

* JDM Miracle X Bar Type II by Next

* Comptech Tie Bar/Sway Bar Combo

* Ingall Engineering Rear Camber Kit

* SPC Rear Toe Adjuster

* Energy Suspension Rear Trailing Arm Bushings, Shifter Bushings, Sway Bar Links, and Bushings

Wheels, Tires, Brakes

* 16 inch Volk Racing Gram Lights Bronze 57S

* Bridgestone Potenza RE01R 205/45R16

* Power Slot Front and Rear Big Rotor Kit w/Hawks HPS Pads

* Russell Stainless Steel Brake Line Kit

Exterior

* NH 675-M Magnesium Metallic

* VIS Double-Sided CF Hood Paint Match to Body

* Vision Technica Sport CF Mirrors Type MC

* 1994 JDM Si-VTEC Front End w/Fenders

* JDM Si-VTEC Headlights, Bumper Lights, Fog Lights, Tailights, and Sidemarkers

* JDM Honda Access Si-VTEC Front Lip

* 1998 Integra Rear Bumper

* JDM Integra 3rd Brake Light

* JDM DOHC VTEC and LSD Decal

* NRG CF License Plate Cover

* Mugen License Plate Bolts

* Shaved Front License Plate Holes, Side Moldings, Rear Trunk and Key Hole

* Rear Wiper Arm, Wiper Motor Delete

* Integra 4Dr Driver Side Door Handle

* Acura Optional Mud Flaps

Interior

* Black Interior Swap (Dash, Carpet, All Panels and Trims)

* Genuine Acura Integra Floor Mats

* Genuine Honda AC Delete Duct, Firewall Plug, and Button Blocker

* Vision Technica Sport Corsa Carbon Kevlar Seats w/Low Position Seat Rails

* Integra GSR Rear Leather Seats

* Top Shop CF Headliner and Door Panel Inserts

* Zoom Engineering CF Rear View Mirror

* JDM ITR E-Brake Handle w/Armrest Eliminator, ITR 98 Spec Badge, ITR Shift Boot

* JDM CF Double DIN Audio Block Off, CF Ashtray

* JDM Si-VTEC Gauge Cluster

* JDM Honda Access Sunglasses Holder, Airbag Block Off, Fog Light Switch, Clock Block Off

* Ignited Engine Start Button

* 1995 Integra RS Door handle Covers, Sunroof Block Off

* SKunk2 Shift Knob, Dual Bend Short Shifter

* Genuine Mugen Pedals

* JDM HKB Steering Wheel Hub

* Nardi Sport Rally Suede Leather Steering Wheel

I.C.E.

None (Sound of the engine and exhaust is good enough)

Source [Carbon8 Mag]

Acura Integra 1994 – 2001 Red Carbon Fibre Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in a Red Carbon Fibre finish.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

“The material is soft, flexible and with a real weave texture allowing it to conform to the contours

“Thin, self-adhesive, vinyl film with a textured, Red Carbon Fibre weave finish.”

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a three mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is precut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim paneling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $40.99

Source [Amazon]

94 – 01 Acura Integra Dual Cluster Bezel Pod

Product Features

Black Dual Cluster Gauge Pod

Holds two 52mm or 2 1/16th inch gauges

Crafted from the Highest Quality ABS plastic Available

Free Installation Support

1 Year Warranty

Product Description

GlowShifts 94 – 01 Acura Integra Cluster Pod is a dual gauge pod specifically designed for your Integras instrument cluster and will house two 52mm or 2 1/16th inch gauges while bringing a unique style and look to your vehicles interior. Each bezel gauge pod is crafted from the highest quality ABS plastic available to withstand cracking, fading, and warping while still giving your Integra a custom fit and finish. This pod is currently offered in a clean OEM black style.

Priced at $24.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The 2009 Lexus IS by Brian Fox (0)
• Honda Civic Si from 2000 (0)
• The wide body Scion xB of Mobil 1 (0)
• The Nissan 350Z ready for action (0)

It was not that she was buying a car that was good to go; in fact, by all accounts the car needed a work doing in just about every single area. Therefore, this means that eBay and just about every corner of the internet was searched and searched again, until she has everything that she needed to make the car that we can see now.

Its impressive how the car has developed, this was task that a team would normally attempt and in some cases fail or just give up. Clearly, this has not happened in this case and so the car has been almost rebuilt from a wasted machine that sat in garage for years and was covered in everything that could imagine. This is a real car now, back on the road and looking better than it probably did when the first owner took delivery of it.

Name – Jennifer Jar

Age – 24

Hometown – PLANO, TX

Occupation – Student

Hobbies – Watching Movies, Reading, Travelling, Photography, Playing Tennis, Swimming, Shopping, Listening To Music

Build time – Six Months

Feedback – fortuneauto.com

Quote – “I DON’T WANT TO GIVE OUT MY EMAIL” – “please remember to blur my plate”

2000 Nissan Silvia

Output – 302 WHP, 301 LB-FT

Engine – Tomei 264 cams, spark plug cover, oil cap; GReddy front-mount intercooler and piping, downpipe; HKS Suction intake, iridium spark plugs, wastegate actuator; Fortune Auto catch can; A’PEXi N1 exhaust, EVC4 boost controller, turbo timer

Drivetrain – Exedy clutch

Suspension – Fortune Auto coilovers, rear upper control arms, rear lower toe control; Top Secret air suspension cup kit; Cusco front and rear anti-roll bars; Nismo rear strut brace

Wheels/Tires – Work Meister S1 18×9 +4 (front) 18×10 +4 (rear) wheels; Dunlop Digi-tires 215/35 (front) 235/40 (rear)

Brakes – Project Mu stainless/Teflon brake lines; Motul RBF600 brake fluid

Exterior – Nissan Spec R front bumper, rear bumper, side skirts; Fortune Auto HIDs

Interior – Recaro SRD front seats and rails; Nardi Deep Corn leather steering wheel; Fortune Auto titanium pedals; Nismo suede shift boot; Blitz Power Meter ID; A’PEXi boost gauge; 20% window tint

Ice – Pioneer head unit

Source [Import Tuner]

ED Front Bumpers Nissan Silvia S15 / Type U 99-02 Extreme Dimensions

Product Description

Nissan Silvia S15 / Type U 99-02 ED Front Bumpers

Specific: General: Extreme Dimensions Front Bumpers –

Extreme Dimensions, Inc. is a world renowned automotive aerodynamic company headquartered in the United States. Our distribution centre of 50,000 square feet is located in Southern California while our manufacturing facilities are worldwide.

Extreme Dimensions currently manufactures and distributes over 6,000 products globally including North America, Europe, Asia, and South America. From our humble foundations in the summer of 2000, we have striven to offer the largest variety of high quality aerodynamic products at the most affordable prices. We have dedicated ourselves to provide our customers with excellent service, meeting and surpassing industry standards. Since the beginning, we have been designing, manufacturing, and distributing aerodynamic products for the Sport Compact, Domestic, European, Truck, and SUV industries.

Priced at $408.47

Source [Amazon]

P&P Engine Management Nissan Silvia S15 / SR20DET Japanese / M/T 99-02 AEM

Product Description

Nissan Silvia S15 / SR20DET Japanese / M/T 99-02 P&P Engine Management

Specific: W/ WIDE BAND UEGO General: Plug & Play Engine Management Systems –

AEM’s Plug & Play Engine Management System (EMS) plugs directly into a vehicle’s factory ECU harness and requires no additional wiring or hardware. Windows?äó compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car. configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS’s infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Installs in minutes using Plug & Play technology wiring necessary!

Start-up calibrations included

Live help window eases tuning process

Set-up Wizard creates a custom base map for your car

System is fully enabled? Never pay for upgrades!

Free software updates on aempower.com

Uses all the factory sensors

Runs on Windows compatible software

Fuel table auto mapping

Programmable traction control

Onboard 512kb

Priced at $3,279.80

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The spectacular Nissan 350Z (0)
• Great looking G35 Coupe (0)
• A brilliant and bright Nissan Skyline (0)
• 2002 Nissan Sentra Spec V from Terence Gamble (0)
• Will Fassett’s Hyundai Tiburon (0)

The Kia Rondo must have been initially built with the family in mind, it has all of the features that you expect to find in a family car like four doors and the statuary hatchback, but here we are looking at Kia Rondo that is the handy work of KSportline and a good job they have done too.

The first that you notice about this car is the colour, it is the House of Kolors Kandy Cobalt Blue probably one of the best colours for this car; it really suits the shape and style. However, this car is all about accessories and that is what KSportline is all about too, there probably is not a single inch where their influence cannot be seen.

Specs of the KSportline built Kia Rondo

Exterior: House of Kolors Kandy Cobalt Blue, Ksportline Front Fascia, Ksportline Rear Valance, Ksportline Side Skirts, Ksportline Rear Roof Spoiler, Ksportline Rear Hatch Wing, Ksportline Eyelids, Ksportline Side Mirrors w/ LED Signals, Ksportline Hood Protector

Wheels/Tires: Enkei Racing RPF01 F&R 18×7.5 All Around, Falken F452 Tires 215/35/18 All Around

Chassis/Suspension: Ksportline Front Strut Bar, JDM UA Air Suspension x4, JDM UA Air Compressors, JDM UA Air Tanks x2, JDM UA Air Lines, JDM UA Air Switches, JDM UA Air Remote, Ksportline Custom 6 Point Roll Cage

Interior: Stitch Craft Carbon Style Head Liner, Stitch Craft Carbon Style Pillars, Stitch Craft Carbon Style Rear Hatch Section, Stitch Craft Carbon Style Door Panels, NRG Racing Leather Steering Wheel, NRG Racing Carbon Steering Wheel Ring, NRG Racing Quick Release Steering Wheel Hub, NRG Racing Carbon Bucket Seats, NRG Racing Seat Brackets & Sliders, Creative Audio Custom Carpet Wrap, NRG Racing 4 Point Harnesses, NRG Racing Carbon/Titanium Pedals, NRG Racing Carbon Shift Knob, Ksportline Custom Painted Dash & Door Trims, Glow Shift Gauge Pod, Glow Shift Oil Temp Gauge, Glow Shift EGT Gauge, Glow Shift Water Temp Gauge

I.C.E.: Nintendo Wii Video Game Console, Sound Stream VIR7355N Head Unit w/ Navigation, Sound Stream TSQ 10” Subwoofers x4, Sound Stream TRC Amps x4, Sound Stream SC8CA Capacitors x2, Sound Stream Speaker Components x2, Sound Stream TRX1000D 17” Drop Down Monitor, Creative Audio Custom Fibreglass

Engine: Ksportline Intake Piping, Ksportline Spec GReddy Airinx Air Filter, NRG Radiator Cap, NRG Titanium Exhaust, NRG Ground Wires, NRG Voltage Kit

Sponsors: KIA Motors America, GLOWSHIFT Gauges, Sound Stream Electronics, House of Kolors, Enkei Wheels, Falken Tires, Universal Air, NR-G Innovation

Shoutouts: AutoFashion, Creative Audio & Motorsports, DTM AutoBody, Stitch Craft World Famous Interior, TWS (The Wheel Supply)

Source [Tunerzine]

06 07 08 09 KIA RONDO XENON FOG LIGHTS DRIVING LAMPS ex

Product Features

(2) 55 Watt 4100K Xenon Lamps

Built-in 10,000K LED Parking Lights

Three Function Rocker Switch

Plug-In Wiring Harness + AMP & Relay Included

Free Hat Valued at $19.99

Product Description

This auction includes a complete fog lamp kit for use on the model listed in this auction without the factory fog lamps or as a replacement for existing factory fog lamps. This auction includes everything needed to install and requires no other parts or extensive modification. The BL-300w outperforms regular fog and driving lights in any weather condition. 90 degree beam pattern is both wide and far reaching, die-cast metal housing 55W H3 xenon 4100K white bulbs combined with 10,000K LED parking lights, 3.5″ lamps, heavy-duty mounting brackets, 3-function switch, deluxe wiring harness included. Bling Lights is one of the true leaders in the lighting industry. They produce Top notch lighting equipment. Bling Lights lamps stand out as “lights with attitude”.

Priced at $67.99

Source [Amazon]

2007 Kia Rondo Carbox II Cargo Liner- Black

Product Features

Fit like a second skin, conforming to the shape of your vehicle

Long lasting and easy to clean too

Easy to clean – just hose off!

Product Description

You will not find better a floor liner for your vehicle than a Carbox II Cargo Liner. Carbox II Floor Liners fit like a second skin, conforming to the shape of your vehicle. Made from a flexible, durable polyethylene – which makes them long lasting and easy to clean too. Imported from Germany. Fits like a second skin, completely custom; Constructed of durable polyethylene; 2″ (5cm) lip on all sides; Great protection for transporting any kind of cargo; Easy to clean – just hose off!

Priced at $93.95

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• KSportline Kia Rondo (0)
• The Kia Rondo by Showopt (0)
• Will Fassett’s Hyundai Tiburon (0)
• Totally cool looking Acura Integra (0)
• This Subaru is all white! (1)

This car has had a lot of work done to it, the first signs are that of the body this has been with style and a lot of attention to detail, the car clearly has all of the right bulges and bumps and they are all in the right places. The interior has been made to look more European than Japanese, the way that the dials have been surrounded by carbon fibre and fabric to give that mix of class and high performance.

Specifications:

1992 Toyota MR2 Turbo

Engine: Toyota 2.0L DOHC Turbocharged Inline 4

Engine Modifications: HKS: (suction pipe, gas pipe, heat shield, turbo cover, piping, bracket, valve cover, Super Sequential blow off valve, cams); GReddy: (intercooler, turbo piping, hoses, oil cooler, oil catch can); one off custom titanium exhaust system, Nology wires, engine bay rewrapped in carbon fibre, miscellaneous chrome parts, NX nitrous system

Engine Management: GReddy e-Manage, APEXi AVC-R boost controller

Drivetrain Modifications: HKS twin plate clutch, TRD LSD

Suspension: one off APEXi N1 damper with Swift Springs, one off stabilizer links, chrome and pillow balls for links, TRD strut bar

Wheels, Tires, Brakes: (fr) 18×7.5-inch Volk Racing SF-Challenge in gold with 215/40/18 Dunlop FM901 tires, Brembo 2 piece calipers with 8 titanium pistons calipers, Project mU rotors; (r) 18×9.5-inch Volk Racing SF-Challenge in gold with 225/40/18 Dunlop FM901 tires, Brembo rear brake kit with Project mU rotors; brake lines rerouted for ABS removal with Hurst line lock

Chassis, Body: custom one piece front end consisting of: USDM turn signals, Bomex bumper, 5cm wide fenders and Nissan Cima F50 headlights; carbon flaps, side skirts and fenders moulded together, rear blister fender wide bodied and moulded, JGTC style rear bumper, one off rear diffuser, JGTC trunk built to house genuine Nismo Hoshino dry carbon fibre wing, Bomex: (rear engine lid, air duct); rear tire housing wrapped in carbon fibre, front one piece equipped with air cylinders to raise front end with timer relay, custom BASF paint

I.C.E.: Carrozzeria H9 head unit / navigation, two Phoenix Gold amplifiers, Focal Utopia speakers, JL Audio subwoofers

Interior Modifications: Bride seats, Takata harnesses, Ractive shift knob, Ignited switches, TRD: (short shifter, steering wheel); Pivot: (oil temperature, water temperature, speedometer, tachometer gauges, boost); entire interior reupholstered in Alcantara fabric

Numbers: Not available

Sponsors: Rays Engineering, Bomex, Pivot, Ignited, BASF, JL Audio

Source [Tunerzine]

1992-95 TOYOTA MR2 TURBO Cross Drill & Slotted Rotors

Product Features

YEAR:1992-95

MAKE: TOYOTA

MODEL: MR2 TURBO

Two FRONT & two REAR -CROSS DRILL & SLOTTED ROTORS

Product Description

Speedy Dynamic offering the highest quality aftermarket and OEM parts to the car enthusiast groups. We have a large selection of high performance brake pads, cross drilled brake rotors, slotted brake rotors, and stainless steel brake lines for most cars, trucks and SUV’s with a competitive pricing. Advantages of the our Cross-drilled and Slotted Rotors ;Increased brake pad bite; Maximum air circulation for increased cooling; Faster release of brake pad gases; Improved wet weather braking; Reduced fade; Increased Safety and Reliability.

Priced at $133

Source [Amazon]

EZ Cover Car Cover 1985-1996 Toyota MR2

Product Description Finally – A Car Cover That is Easy to Use AND Easy to STORE!

The EZCOVER is unlike any cover before it. This car cover is so easy to use you will wonder how you ever got along without it. The case allows the cover to be stored in an area that takes up less than 1.5 ft of space.

The EZ Cover Car Cover is also incredibly easy to put on your car or SUV. No more fumbling to find the front of the car cover. The front of the cover ALWAYS comes out first. Once the cover is on the car, simply store the case in the trunk with the attached string. The Reel In case allows you to keep your clothing clean while removing the cover because the cover never has to touch your clothing! Best of all the cover Reels back into the case in about 30 seconds, making storage a snap!

Fabric and Materials – The EZcover is constructed of a special high-grade polyester material that has been treated with waterproof and UV coating during the manufacturing process. These coatings keep water, dust, sun, snow, bird droppings, acid rain and industrial pollutants from penetrating the cover and therefore protecting your vehicle. This fabric was designed to be both functional and durable. The EZcover is a technologically advanced lightweight cover that can withstand the same elements as a heavier more bulky car cover. Not only is it durable but it is very soft so that it will not scratch your vehicle.

Amazing Features – Built in Grommets: EZ Cover has built in grommets on the bottom of the cover that allow cable and locks to be used to provide additional security for your car cover

Suction Cup & String: EZ Cover comes with an attached suction cup and a string that can be placed over your license plate. Once secured you can pull the cover out of the case and over the car all while

Priced at $109.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The 2006 Honda Civic EX by Chester Yu (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The Mazda RX7 the best of the best (1)

But for other people, especially those who have a bit of flair and vision this car is a dream come true, because it is cheap and there are stacks of spares lying around. Yet you still do not see many of these on the import builder scene and that is a real shame.

This particular car on the outside does not look as if it has been worked on, sure, the bodywork is in tip top condition, but it is the subtle little things that is making all of the difference such as lights, grill, mirrors and the all important emblem on the trunk.

Under the bonnet, there are serious changes either, it has a custom Ram-Air intake, plugs and wires and a Denso performance alternator. So this is a car that is not much different from the one that was imported into the US all of those years ago, it has just been cleaned up and modified slightly into a great looking Honda Accord.  

Jason Land – 1993 Honda Accord

Engine Modification – Custom Ram-Air Intake Throttle Body Coolant by-pass Denso High Performance Plugs/Wires Denso Performance Alternator

Suspension – Carbon Fibre Strut Bars

Wheels, Tires, Brakes – 18″ Katana Rims 225 40R18 Nankang Tires

Exterior Modification – Carbon Fibre Elegante Taillights Carbon corner lamps Carbon bumper lenses LED turn signals LED brake lights Green Reverse lights Green grill lights Green engine-bay lights Custom made grill Black painted Honda Trunk emblem Black Zero 4 Style Mirrors w/colour change LEDs signals

Interior Modification – Green under-dash neon (12in. tubes) Black sun visors Upholstery changing to Black/green

I.C.E. – Panasonic 55×4 Deck 2- 51/4 Pioneer Speakers 2- 6×9 Pioneer Speakers

Sponsors – H&H Tire, Fountain, CO

Others – Nickname: Midori, the Green Hamster

Source [Carbon8 Mag]

90-93 HONDA ACCORD FRONT DOOR HANDLE LH (DRIVER SIDE), Inside, w/ Lock Hole, Black, Sedan, LX/EX Model (1990 90 1991 91 1992 92 1993 93) H462110 72165SM4003ZD

Product Features

Brand New in Box, aftermarket replacement part.

These are excellent quality aftermarket parts offered at a fraction of OEM cost.

Fit & Quality Guaranteed.

110% Lowest Price Guarantee.

OEM# 72165SM4003ZD

PART# H462110

THIS PART FITS THE FOLLOWING VEHICLES:

90-93 HONDA ACCORD, Inside, w/ Lock Hole, Black, Sedan, LX/EX Model

Product Description

90-93 HONDA ACCORD FRONT DOOR HANDLE LH (DRIVER SIDE), Inside, w/ Lock Hole, Black, Sedan, LX/EX Model

OEM# 72165SM4003ZD

PART# H462110

Priced at $5.99

Source [Amazon]

Honda Accord 1990 – 1993 Vivid Blue Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in a Vivid Blue.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

“Thin, self-adhesive, vinyl film with a Vivid Blue finish.”

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a three mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The Tempest Racing Acura Integra Drag Car (1)
• The New World Samurai Integra Type R (0)
• The Honda Civic DX project (0)
• The cool old school Honda Civic Si (0)

This Dodge SRT 4 is a beautiful looking car for so many reasons, the colour, size, shape and just about everything about the car. To make thing even better the owner Bill Stetson has no sponsors either (Anyone interested?) this is a real privateers job that looks utterly fantastic.

The cars body has founds it way into other models, like the Neon from Chrysler, yet it is the Dodge that comes out on top, especially when it has had the amount of work on it, like this one has had. Sometimes having panels blacked out makes a car look a bit dull, but even that has come out all right.

Specs for Bill Stetson’s 2004 Dodge SRT 4

Modification – Mopar Stage 3 Turbo Kit: (TD05 turbo, manifold, pcm, map, tip, injectors, fuel rail, wastegate, fuel pump), Turbo Toys: (intercooler sprayer, dial a boost, and high octane mode), AGP Stage 3 Wastegate, Walbro 255 pump, JMB Cold Air Intake powdered Eblue and splash shield, JMB coilpack heatshield, Mopar wires, NGK 4306 plugs, JMB polished tranny cover, All misc. parts painted black, Carbon Fibre injector cover, Carbon Fibre fuse box lid, Carbon Fibre radiator shroud, PTP check valve, Bwoody Eblue catch can, 180 deg tstat and housing Eblue, Eblue vave cover, JMB Uppipe with Greddy S blow off valve, AGP dog bone motor mounts, GMR filled trans mount, JMB Eblue radiator pipe, ported intake manifold, Maxxfab 3″ Stage 3 o2 housing, Maxxfab 3″ downpipe, Mopar exhaust, CCA polished large front mount intercooler with slow boy crash bar painted black

Engine Management – Mopar Stage 3 PCM using factory vacuum line setup

Drivetrain Modification – Mopar short throw shifter

Suspension – Mopar Stage 1 Lowering Springs. front polished strut bar, rear polished strut bar,

Wheels, Tires, Brakes – 19 x 8 Flik Hornets custom painted CF gray with Eblue lip. 225/35/19 tires, Slotted/Drilled Rotors, Hawk pads, Eblue Bomba Rotor Covers, Pt Cruiser Sway Bar

Exterior Modification – GRIP see through hood (1/20) painted CF Gray, Kaminari Carbon Fibre front lip custom painted, Carbon Fiver crosshairs (1/20), Carbon Fibre fog surrounds, Carbon Fibre Trunk with Carbon Fibre elw wing (1/2), Carbon Fibre plate surround, Carbon Fibre gas cap, Carbon Fibre vortex generator, Carbon Fibre rear diffuser, Kaminari Sideskirts, Custom Front emblem, Projector Halo Fog lights, Projector Halo Headlights, LED Taillights, All lights professionally tinted with paint including sidemarkers, CF gray painted roof, CF Fenders, 35 % tint, shaved antenna, Carbon Fibre F-1 mirrors, Carbon Fibre B pillars, Carbon Fibre C pillars

Interior Modification – Bride Grux II Seats and harnesses, DMC Harness Bar, Carbon Fibre A pillars (1/5), Carbon Fibre B pillars (1/1), Carbon Fibre C pillars (1/1), Carbon Fibre steering wheel surround (1/1), Carbon Fibre door panels, Carbon Fibre shift knob, Carbon Fibre arm rest, Carbon Fibre HVAC, Carbon Fibre Speedo Bezel (1/1), Carbon Fibre speedo Background, Black Suede Headliner, Autometer 30/30 boost, fuel pressure, wideband gauges, NRG quick release hub and Tenzo Steering wheel awaiting install

I.C.E. – Jenson DVD flip head unit with IPOD dock. Kicker speakers all around. 10 inch sub/amp in trunk while building new trunk setup.

Sponsors – Looking for them.

Numbers (WHP, 0 to 60 mph and etc.) – Never dyno’d or run but similar setups yield 360-390 whp and will run the quarter mile with slicks in 11.6-12.3 trapping 115-119. I have run it on street tires and ran 12.8 at 117 spinning 1st, 2nd, and part of 3rd.

Others – One of the top show and go SRT-4’s out there. Been Car of the Month on numerous sites, been in a commercial, interviewed on NOPI tv, enthusiast calendars, and won a ton of car show awards.

Source [Carbon8 Mag]

2003-05 DODGE SRT-4 Cross Drill & Slotted Rotors

Product Features

YEAR:2003-05

MAKE:DODGE

MODEL:SRT-4

2 FRONT & 2 REAR -CROSS DRILL & SLOTTED ROTORS

Product Description

Speedy Dynamic offering the highest quality aftermarket and OEM parts to the car enthusiast groups. We have a large selection of high performance brake pads, cross drilled brake rotors, slotted brake rotors, and stainless steel brake lines for most cars, trucks and SUV’s with a competitive pricing. Advantages of the our Cross-drilled and Slotted Rotors ;Increased brake pad bite; Maximum air circulation for increased cooling; Faster release of brake pad gases; Improved wet weather braking; Reduced fade; Increased Safety and Reliability.

Priced at $140

Source [Amazon]

Dodge SRT4 Neon Hood Emblem – Autobot

Product Features

Brand New

Billet Aluminium

Ready to install

Product Description

Billet aluminum front emblem for your SRT-4/Charger. CNC milled from 1/8th 6061 aluminium for an OEM style 3 dimensional look. This emblem has a satin aluminium finish and look great just as they are, but we also offer it in polished and powder coated versions. All of our emblems come ready to install. Simply remove the protective plastic from the double sided tape, and apply to your vehicle. This emblem will fit: 2003-2005 Neon SRT-4 (front) 2006-2008 Charger (front) The emblems are 2.175″ wide by 2.355″ high and may fit other vehicles.

Priced at $20

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Mitsubishi Galant by Broderick Jones (0)
• “Z” is not always last (0)
• The perfect Lexus IS F (0)
• The Mazda RX7 the best of the best (1)
• The Lexus GS (Carbon GS) (0)

It is a 1998 Nissan Skyline R34 Sedan and it is on it third life, but given that it does not look too bad on that either. It looks brilliant with a ten piece body kit from URAS, widening the front by around 20 mm, while at the rear it is huge 40 mm wider than before, that is so it accommodates the eleven inch rear wheels.

Under the hood there is the Nissan RB26DET 2.6 litre turbo charged power unit, this has been rebuilt and at the same time painted, the fuel injectors are 1000 cc as this is the only way to feed to the GT42R Garrett turbo.

All together, this is a supreme piece of machinery that bends all of the rules, if this car actually abided by any of the rules in the first place. Thankfully this Skyline will not be sitting in a garage somewhere gathering dust, its out there already and for more information go here http://www.tjineditiontour.com

SPECS Tjin Edition / ICE 1998 Nissan Skyline R34 Sedan

Vehicle: Nissan

Model year: 1998

Model: Skyline

Body Style: 4-door

Exterior Colour: Battle Ship Grey

Interior Colour Battle Ship Grey and Maroon

Exterior:

Wheels: One Lug Wheels

Front: Custom one-off 20×10” 12-spoke (OLW-4) One Lug Wheels. Grey colour matched centres, gloss black lips, black bolts, hub adapter, lug nuts and centre locking nut.

Rear: Custom one-off 20×11” 12-spoke (OLW-4) One Lug Wheels. Grey colour matched centres, gloss black lips, black bolts, hub adapter, lug nuts and centre locking nut.

Tires: Falken Tires: 255/35/20 fronts and 275/35/20 rears

Body: Custom PPG Grey paint job, URAS 10 piece wide body kit (customized front bumper to accommodate Bell front mount intercooler, +20mm front fenders, rear door skins, +40mm rear fenders, side skirts, rear valance, and rear spoiler), metal R34 GT-R hood, metal rear trunk lid with shaved third brake light, shaved gas door, shaved door handles, shaved front and rear emblems, Magic Touch hidden door poppers for all four doors, black housing headlights, power fold in mirrors, custom Tein hood struts, LED taillights, and Ignited HID 6000 headlight bulbs.

Engine: Nissan RB26DET 2.6L turbocharged motor (with less than 50 miles on the rebuilt motor), RB26DET motor swap, balanced and blue printed Skyline RB26DET motor, smooth and painted block, custom port and polished heads, NISMO gaskets, NISMO water pump, custom catch cans, custom fuel injection system with 1000cc injectors, BDL 100mm throttle body, custom BDL cam gears, custom tension idle pulley, RB25DET oil pan, R33 crankshaft, ARP: (head studs and bolts), custom Magnaflow 4” full cat-back exhaust, Garrett GT42R turbo, Unique Fabrication intake and turbo manifold, custom Bell Intercoolers front mount intercooler (30×18.5×4), Vibrant 4” intercooler piping, PWR radiator, TiaL wastegate and blow-off valve, ID-Tuning 4” downpipe, steel braided hoses, and one-off FAST engine management stand alone system. Powder coated black intercooler piping, intercooler, turbo and engine accessories. Custom colour matched Skyline GT-R valve cover and one-off strut bar. Skyline GT-R valve cover centre plate.

Fuel set-up: 20-gallon fuel cell, Barry Grant sumo fuel pump and fuel pressure regulator.

Pedal assembly: custom pedal assembly with custom pedals and brake reservoirs

Drive train:

Layout: Custom rear-wheel drive conversion using an RB26 transmission

Drive train mods: 6-speed transmission, ACT clutch

Suspension:

Front: One-off Function and Form Type II fully adjustable / 32 different levels of dampening / coilovers and ID-Tuning control arms

Rear: One-off Function and Form Type II fully adjustable / 32 different levels of dampening / coilovers and ID-Tuning control arms

Brakes:

Front: Custom Stop Tech 6piston calipers, cross-drilled rotors, and stainless braided lines

Rear: Custom Stop Tech 4piston callipers, cross-drilled rotors, and stainless braided lines

Interior:

Fully gutted, stripped, prepped and painted interior, Glow Shift 7-color gray boost, water temp, and oil pressure gauge, Status Racing / Tjin Edition carbon fibre racing seats, Custom Unique Fabrication seat mounts, Team Tech 4pt harnesses, Unique Fabrication 12pt chromoly roll cage (painted burgundy), Unique Fabrication pedal and brake set-up, D2 Racing air jacks, ID-Tuning steering wheel adapter, Limited Edition Advan steering wheel, Custom all metal centre console, door panels, air bag cover and rear deck, lid, Ignited Performance toggle switches and window switches, NISMO GT-R gauge cluster, Custom mounted carbon fibre NX bottle, Custom mounted red Optima battery

ICE:

Swish Audio door speakers

Sponsors:

ICE, Turtle Wax, Marvel Mystery Oil, One Lug Wheels (www.onelugwheels.com), AUTOLIFE Emergency Services (www.autolifees.com), Glow Shift Gauges, Function and Form, Status Racing, Magnaflow Exhaust, Unique Fabrication, ID-Tuning, Berk Technology, Falken Tire, Stop Tech , Ignited HID’s, Ignited Performance, Barry Grant, TiaL, Bell Intercoolers, Vibrant Performance, PPG Paint, Martin Auto Color

Source [Tunerzine]

Brembo Front 14 Inch 4 Piston Brake Kit 2pc Nissan Skyline R34 99-01

Product Description

Product Description

Brembo Front 14 Inch 4 Piston Brake Kit 2pc Nissan Skyline R34 99-01

This line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, aluminium callipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.

Four Piston

355×32 2-piece

Calliper Colour: Black, Silver, and Red. Please select below.

Rotors: Drilled or Slotted. Please select below.

Priced at $3,145.49

Source [Amazon]

Seibon OEM hoods (Nissan | Skyline | R34 | 99-01)

Product Description

Therefore, you are looking for a stylish appearance and lightening up your vehicle’s weight yet you’re not willing to modify the style of your stock hood. In this case, we have the perfect hood for you. The Seibon OEM-Style Carbon Fibre Hood presents all the elements of a top-quality after-market hood yet it allows your vehicle to maintain its stock appearance. A simple procedure of an OEM-Style Carbon Fibre Hood upgrade can go a long way.

Highest Quality Grade-A Carbon Fibre

Solid Under body Hood Skeletons/Reinforcements

Exclusive Designs

All Hoods Utilize a Glossy Clear Coat & UV Protection

Elite Hood Scoops for Optimal Engine-Air Intake

Custom Manufacturing for Precise Fitment

Satisfaction Guaranteed

Priced at $962.55

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The spectacular Nissan 350Z (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)
• The 750 HP Nissan 350Z (0)

This is probably one of the curviest RX7’s around; it has bulges, curves and arches that blend together in perfect harmony. It really is a fantastic looking car that is capable of delivering around 345 HP at the rear wheels, which is something to think of when you have this car sitting behind at a junction.

The Mazda RX7 has been and still is a great car, this one is a great example of this model that has been carefully worked at and the finished item is absolutely top notch.  

Engine Modification

Engine

13B-REW Street Port

Apexi Power FC

Apexi Blow off valve

Apexi Noir Exhaust

Apexi GT Downpipe

Apexi Grounding Kit

HKS RS Intake

HKS RS Reloaded Filters

Fluidyne Radiator

Braille Battery kit

Carbing Air Diverter Panal

Greddy Oil Catch Can

Greddy Elbow

Greddy Intercooler Piping

Skunk2 Brake Reservoir Cover

Weapon R Engine Torque Damper

Hose Techniques Silicon Vacuum Hoses

Torco SR-5 20-50 Full Synthetic Oil

Engine Management

Apexi Power FC

Suspension

TEIN Super Street Coilover kit

Swift Springs 10kg F /10kg R

Cusco strut bar

Suspension Techniques front and rear sway bars

Hard Race Steering end links

Hard Race Trailing arms

Hard Race Toe Links

Wheels, Tires, Brakes

StopTech 332×32 2 Piece Slotted Rotors

StopTech ST-45 Calipers

StopTech Stainless Steel Brake Lines

Axxis Ultimate Brake Pads

ATE Blue Brake Fluid

Enkei RP03 SBC 18×9 +18

Enkei RP03 SBC 18×10 +22

Muteki Lug Nuts

Dunlop Direzza DZ101 245/40R18 front

Dunlop Direzza DZ101 275/35R18 rear

Exterior

Lexus IS 350 Tungsten Pearl Silver Paint

KS Auto – Burnout Hybrid FRP Front Bumper

KS Auto – Burnout Hybrid FRP Side skirts

KS Auto – Burnout Hybrid FRP Rear Bumper

Fujita Engineering Hood (FEED)

KS Auto – Burnout 20mm Front Fenders and 20mm Rear fenders

Evo-R Sleek Headlight Conversion

Sonar LED Tail lights

Shine Auto Tail Light Cover

99 Spec turn signals

FEED Japan carbon fibre door handles

Interior

Sparco Hub NRG V2.5 Quick Release

MOMO Tuner Steering wheel

Apexi AVC-R

Apexi Rev/Speed Meter 0-100 Timer

Apexi EL2 Oil Temp

Apexi EL2 Water Temp

Apexi EL2 EGT

Apexi EL2 Oil Press

Apexi EL2 Fuel Pressure

Apexi EL2 Boost KPA

Apexi EL2 Control Box

Greddy Turbo timer

Bride Seat FG Rails

Bride Exas III Seats

Custom Heel Toe Pedal

Relocated AC Air Controls

Alpine Head Unit

Ignited Push Starter

Ignited Din Panel

Ignited Switches

Alpine In Dash

Sponsors

KJ at INGS+1 USA

Suzanne/Lisa at Enkei Wheels

Jack at Dunlop Tires

Pete at ATi Interiors

Duy at Profile

Luckey at HoseTechniques

Ali and Darren at Apexi Integration

Blake at Braille Battery

Shino at Bride USA

Ernie at Torco USA

Howard at StopTech

Roger at Hard Race

Ken at Shine Auto Project

Makito at Seven Apple

Numbers

345 rear-wheel horsepower at 6,250 RPM with 14psi of boost and 308 lb-ft of torque at 5,000 RPM.

Source [Carbon8 Mag]

HKS Full Turbo Upgrade: T51R KAI: MAZDA RX-7 #11631

Product Description

HKS Full Turbo Upgrade Kits are designed to replace the entire factory turbocharger system with a high-performance turbo that maximizes the horsepower potential of the engine. Included along with a HKS Signature Series or GT Series turbo(s) is a more efficient turbo manifold that has been precisely engineered out of cast-iron or tubular stainless steel. An HKS external wastegate is also included along with a downpipe, suction pipe, intercooler pipe and all the necessary fittings and lines for a complete installation. HKS Full Turbo Upgrade Kits are strictly for off-road use only.

Features:

56T Trim

1 A/R

V-band Flange Type

GT Wastegate Type

T51R KAI

***Picture may differ slightly from actual product***

Fits: MAZDA RX-7 1993-1996 Turbo ; S/S Manifold (Off Road Use Only). Requires JDM intake manifold

Priced at $7,193.99

Source [Amazon]

Mazda Rx-7 Automotive Repair Manual/1986 Thru 1991, All Models/No. 61036 (Haynes Repair Manuals (Paperback)) (Haynes Manuals) (Paperback)

Editorial Reviews

Product Description

Total Car Care is the most complete, step-by-step automotive repair manual you’ll ever use. All repair procedures are supported by detailed specifications, exploded views, and photographs. From the simplest repair procedure to the most complex, trust Chilton’s Total Car Care to give you everything you need to do the job. Save time and money by doing it yourself, with the confidence only a Chilton Repair Manual can provide.

Product Details

Paperback: 301 pages

Publisher: Thomson Delmar Learning; 1 edition (January 15, 1999)

Language: English 

Priced at $22.95

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Mazda RX7 the best of the best (1)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The Honda Civic DX project (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)

There has been a lot of under the body too, believe it or not, with an original engine and a JDM ITR 4 to 1 header connecting to the Comptech exhaust makes for essential building these days and is enough to beef up the HP. However, to get a decent spark NGK plug leads are the required element and now the car is ready roll.

Taking about rolling the car has been fitted with a set of Ray Engineering Gram lIghts in gold, which happens to blend perfectly with the camo green shade of paint. Finally, it is Falken Azenis 215/45/16 rubber that is wrapped around those golden wheels that are held on with Muteki lugs.

SPECS Engine: B18C JDM ITR, AEM fuel rail, FPR, B&M gauge, Samco Sport rad hoses, Fal fans, NGK plug wires, Earl’s fuel filter, JDM ITR 4-1 header, Comptech exhaust, Skunk2 batt. tie, Spoon res. covers, CF plug cover, Energy suspension bushings, Braided fuel lines, 10 gallon Triangle engineering fuel cell, Federal external fuel pump

Transmission: JDM ITR LSD tranny, ACT 6-puck clutch, ACT extreme pressure plate, JDM ITR flywheel

Exterior: Nissan Xterra camoflage green inside and out. Car was painted as shell, JDM ITR front clip w/non HID lights, JDM ITR front lip spoiler

VIS carbon fibre hood and hatch, Roof skin painted black, 98-up taillights, Shaved mouldings and emblems

Interior: Sparco Torino black/grey seats, Sparco 4-point harnesses, 4 point roll bar, JDM access RHD floor mats, JDM ITR 97 spec non-SRS steering wheel, JDM ITR door panels, switches, dash, gauge cluster, shifter console, boot, armrest eliminator, JDM ITR carbon climate control and vents, clock block plate, power, folding mirrors, Power windows, sunroof, Autometer fuel gauge, Alpine CDA-9815 head unit, Boston Acoustic speakers, Clifford Intelliguard 7000, Clifford Intellistart4

Wheels/Brakes/Suspension:

16X7″ Volk Racing Gramlights, 215/45/16 Falken Azenis, Muteki open-ended lugs, JDM ITR 5-lug front and rear, Brembo X-drilled/slotted rotors, PBR pads, Stainless lines, Apexi World Sport coilovers, Apexi front upper pillowball mounts, Energy bushings, JDM ITR front upper strut bar, JDM ITR front sway bar, GSR rear sway

Extras: Steering rack and complete suspension disassembled and painted flat black off of the car

Complete car was painted as a shell with no panels attached. Doors, bumpers, and any removable parts painted separately

Source [Tunerzine]

CP Pistons SC7011 Acura B18C1 Integra GSR DC2/DB8

Product Features

High strength aluminium forging

Super lightweight design

Fully CNC machined and balanced to +/- 1 gram

Accumulator groove present

Double pin oilers, force fed from oil ring

Product Description

Aluminium Piston Set * Condition – Brand New! * Brand – CP Pistons * Application o Acura B18C1 1.8L engine + Naturally aspirated + Nitrous + Works with B16A, B18A, B18B, and B18C head * Features o High strength aluminium forging o Super lightweight design o Fully CNC machined and balanced to +/- 1 gram o Accumulator groove present o Double pin oilers, force fed from oil ring o Pick lock grooves for easy lock removal o Bore = 81.5 mm (+0.5 mm) o Compression height = 30.0 mm o Compression ratio = 9.0:1 * Note o Please visit CP Pistons website for to learn more about the company, product fabrication process, and product information

Priced at $592.20

Source [Amazon]

JDM Style License Plate – DC-2

Product Features

Exact Japanese License Plate Specification

Stamped Aluminium plates

Folding design for compact storage

Vibrant Colour

Fit most standard size vehicles

Product Description

The ultimate JDM touch to complete your ride. Made of solid stamped aluminium, it will endure snow, rain, hail and sun just like official license plate. The plate is then further treated with a protective coating to give it lasting luster. The lettering is in the same embossed style with deep green colour. It comes pre-drilled holes for US mounting so, no extra work required! Dimensions: 13″ x 6.5″.

Priced at $45.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The New World Samurai Integra Type R (0)
• The spectacular Nissan 350Z (0)
• The Mazda RX7 the best of the best (1)
• The cool old school Honda Civic Si (0)

Sometimes you have to think that that these cars are hybrids using parts from other cars, but there is nothing new about that, even some of the manufacturers of some cars use the parts from other makes.

The main thing about this car is the engine swap, no longer does it carry the standard power plant, and this has a punchy straight six three litre Toyota 2JZ GTE engine. Now this is something that you do not associate the 240SX, but what that does mean is that this car is capable of generating well over 600 hp and that has to be taken seriously.

SPECIFICATIONS

Engine – Toyota 3.0L inline-6 2JZ-GTE

Engine Modifications – 2JZ-GTE engine swap, Turbonetics T64 ball bearing turbo, wastegate, couplings; Spearco intercooler, oil cooler; SPAL electric fans, HKS fuel rail, cam gears, Super Sequential blow off valve, Hi-Power muffler; custom intake manifold, Q45 throttle body, RC Engineering 750cc injectors, Venom fuel pressure regulator, Aeromotive 1000 fuel pump, BMC CDA intake, custom purple valve cover

Engine Management – HKS GCC, IPM, F-Con V Pro, PLX Devices R500 wideband o2 meter

Drive train Modifications – Centerforce DFX 6-puck clutch, Quaife LSD

Suspension – A’PEXi N1 drift spec coilovers, Cusco tension rods, rear camber rods, traction rods, front sway bar; billet sub frame bushings, Kazama tie rod ends

Wheels, Tires, Brakes – (front) 18×9-inch Enkei RP03 wheels with 245/40/18 Nitto NT-01 tires, (rear) 18×10-inch Enkei RP03 wheels with 275/35/18 Nitto NT-01 tires; Project Mu 14-inch big brake upgrade

Chassis, Body – Origin Lab full body kit, 30mm wide fenders; JDM Silvia dual projector headlights, GTR grill, JDM Kouki taillights, APR GTC 2000 wing, carbon fibre mirrors, carbon splitter; VIS Racing carbon fibre hood, Lamborghini Yellow paint

Interior Modifications – TIG welded 6-point chromoly roll cage, Fuel Safe cell, Nismo cluster, Tomei steering wheel, Recaro SPG Racer carbon Kevlar driver seat, SPG passenger seat, brackets

Numbers – 640whp

Sponsors – Enkei Wheels, Turbonetics, Nitto Tires, Motul Oil, Origin Lab, HKS, APR, PLX Devices, Quaife, Centerforce, RC Engineering, BMC, Project Mu

Source [Carbon8 Mag]

MimoUSA Headers (Nissan | 240SX | 89-90)

Product Description

Your factory exhaust manifold also known as “headers” is designed only in part for efficiency and power. As a result, maximum exhaust flow (power) is not achieved using factory headers, regardless of other performance exhaust modifications. To maximize flow and power, a better design is required.

Maximize Flow to Maximize Power

MimoUSA headers increase flow and power by using larger diameter tubing and an equal length design, meaning all pipes leading to the collectors are the same length. This design means that as each cylinder fires, the exhaust gas pulse released arrives at the collector following the previous pulse in perfect synchronization, creating a perfect, uninterrupted exhaust gas flow. This smooth flow means MORE flow and more power.

Dyno tested and proven

Direct bolt-on without modification

T-304 stainless steel mandrel bend for ultra fast flow

CNC machine flanges with TIG and MIG welded construction

Utilizes factory 02 sensor position

Specifications:

Flange is 3/8 thick

Bolts from the block to the motor

Primary tubes are 1 1/8

Diameter of end tube (bolts to CAT converter) 2 on older cars

Engine: KA24

Tri-Y Design

Priced at $296.92

Source [Amazon]

TC SPORTLINE 89-94 NISSAN 240SX S13 4 LUG TO 5 LUG WHEEL HUB ADAPTERs

Product Features

ONE FULL CONVERSION KIT (2 FRONT & 2 REAR)

CONVERT FROM 4 LUG HUB INTO 5 LUG BOLT PATTERN

Product Description

Four Lug bolt pattern wheel hubs are usually for front wheel drive vehicles, therefore, many high end wheel companies only make stagger offset wheels in 5 lug bolt patterns. For 89-94 Nissan 240SX owners, in order to fit some of the wheels they have to buy special adapter-type spacers or locate some JDM conversion parts in order to change their bolt pattern to the 5 lug spec. Using spacer adapters will take away fender clearance so people will be forced to use smaller wheels than they desired. Used JDM parts that could cost a whole lot more and the condition of the parts might not be ideal. TC Sportline has developed a five lug hub assembly conversion kit that will allow S13 owners to convert their entire hub assembly from four lug to 5-lug bolt pattern. The conversion process is made much easier with the TCS hub kit and no major modifications are needed. The front hub assemblies also included high grade bearings for easy installation. The stock brake callipers can be retained after the conversion and because it is not the cheap spacer type conversion kit, S13 owners could use the biggest and widest wheels possible. It is also a safer option when building race/drift cars. This will enable 240SX owners to fit more variety of wheels in the desired offsets onto their vehicles. After the conversion, stock brake callipers can be retained or they could upgrade to a bigger brake kit. The kit comes with all four hub assemblies for the front and rear axles. Specially designed hubs will also allow you to switch back to the 4-lug pattern by simply remove and reconfigure the wheel studs.

Priced at $359.20

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The great looking 1994 Nissan 240SX from Dennis Som (0)
• The Nissan 350Z ready for action (0)
• The Nissan 350Z in pure black (0)
• The 2004 Nissan Maxima owned by Warren Goldberg (0)
• Smart looking Nissan 350Z (0)

Yet as normal this is no ordinary Nissan 350Z, this car has been rebuilt virtually from scratch, you only have to look at the specs to see what has been done to this car, the is very long and concise. As you can imagine the not only has this taken a lot of time, money is factor too as all of this equipment and parts do not come cheaply, therefore sometimes the odd sponsor comes in handy, get all this together an you are halfway to building a decent car.

Engine Modification

VQ35DE

APS/Garrett GT35R Single Turbo

APS DR Series Bar & Plate Front Mount Intercooler

APS 500cc Injectors

APS High Volume Twin Vent Blow Off Valve

APS Single Turbo High Output 2.5″ Exhaust

Walboro 255 LPH High Flow Fuel Pump

MotorDyne Plenum Spacer

Max Earth Grounding Kit

APS High Capacity Oil Pan

Greddy Oil Catch Can

Greddy Breather Tank

SGP DA Breather Tank Cooling Mod

SGP Modified Thermostat

Mishimoto Radiator

Mishimoto Radiator Cap

AutoTecknic Carbon Fibre Radiator Panel

Amsoil Fluids

Engine Management

HKS F-CON IS – Wired to head unit to display CAMP system

HKS F-CON VPRO harness

Drive train Modification

SPEC Stage 3 Clutch

SPEC Aluminium Light Weight Flywheel

SGP SST Clutch Line

Suspension

Hotchkis Lowering Springs

Hotchkis Sport Sway Bars

JIC Magic Carbon Fibre Strut Tower Bar

Wheels, Tires, Brakes

Volk RE30 Formula Silver 19×10 +30F and 19×11 +25R

Project Mu Front Forged four Piston Callipers

Project Mu 355mm SCR-Pro Rotors

Project Mu B-Force Front Brake Pads (1 Per Piston)

Project Mu Teflon Steel Braided Brake Lines

BF Goodrich g-Force T/A KDW (Front 255/35/19 Rear 285/35/19)

Exterior

Vertex Lang Body Kit and Canards

Blitz Rear Spoiler

S2000 Antenna

Fairlady Z Emblem

Vertex Emblem

Underground Graphics Decal Package

Interior

Bride Zeta III Driver

Bride XAX II Passenger

Vertex 10th Anniversary 350mm Steering Wheel

Works Bell Quick Release and Hub

Sparco Harness Bar

Crow Enterprise 5 Point Harness

Greddy Profec Type S Boost Controller

Defi-Link Meter BF Amber Boost Gauge

Defi-Link Meter BF Amber Oil Pressure Gauge

Defi-Link Meter BF Amber Water Temperature Gauge

Defi-Link Meter Control Unit II

Valentine One Stealth Mount w/ Concealed Display

Custom Bride Floor and Trunk Mats

Project Mu Shift Knob and Pedal Set

Vertex Leather Shift Boot

I.C.E.

Kenwood DDX8017 ?Kenwood KNA-DV4100

JL Audio XR650CSi 6.5 Component Speakers

JL Audio VR650CXi 6.5 Coaxial Speakers

JL Audio 300/4 Amplifier

Sponsors

Vertex-USA

MYNISMO.COM

Volk Racing

Project Mu

BASF

Meguiar

SPEC Clutches and Flywheels

SGP Racing

JTran Studio

Underground Graphics

Mishimoto

Amsoil

Numbers

403rwhp, 387.9 ft/lbs

Source [Carbon8 Mag]

Nissan 350Z Coupe Fitted Luggage Bags

Product Features

Made of highly durable nylon with a solid base and thick, durable inner lining

The JDM-style “Fairlady Z” logo is embroidered using distinctive silver thread

The zippers are rugged and oversized for easy handling and exceptional durability

Rubber piping on the sides protect the material from damage and ensure long life.

Extremely low production run assures exclusivity

Product Description

These travel bags and offer the perfect combination of space maximization and usability for your 350Z

Priced at $139

Source [Amazon]

Nissan 350Z & Infiniti G35, 2003-2008 (Haynes Repair Manual) (Paperback)

Editorial Reviews

Product Description

Haynes manuals are written specifically for the do-it-yourselfer, yet are complete enough to be used by professional mechanics. Since 1960 Haynes has produced manuals written from hands-on experience based on a vehicle teardown with hundreds of photos and illustrations, making Haynes the world leader in automotive repair information.

Book Description

Haynes manuals are written specifically for the do-it-yourselfer, yet are complete enough to be used by professional mechanics. Since 1960 Haynes has produced manuals written from hands-on experience based on a vehicle teardown with hundreds of photos and illustrations, making Haynes the world leader in automotive repair information.

Product Details

Paperback: 336 pages

Publisher: Haynes Manuals, Inc. (May 8, 2008)

Language: English

ISBN-10: 1563927233

ISBN-13: 978-1563927232

Product Dimensions: 10.5 x 8.3 x 0.8 inches 

Priced at $16.47

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Nissan 350Z in pure black (0)
• Smart looking Nissan 350Z (0)
• Richard Andrews Nissan 350Z (0)
• The spectacular Nissan 350Z (0)
• The great looking 1994 Nissan 240SX from Dennis Som (0)

Of course there are those people who feel that all of this money and time spent on the build is a waste as the owner could simple go out with all of that cash and buy a new hi-spec car. Well yes, they probably could do that and yet they do not. That is because building a project means more than just adding a few bits and pieces, these cars cease to be Honda’s or Toyotas, they become a new car one that have been built to order, just as they used to be.

1993 Honda Civic DX specs:

Output Secret Engine ‘95 JDM B16A; JDM B16B pistons, rods, cams, valves, valve stems, retainers; Skunk2 intake manifold; Password: JDM carbon fibre intake; BLOX 73mm throttle body; Buddy Club Spec 2 exhaust; High end header; BDL Industries cam gears; Mishimoto radiator, cap, hoses; Hondata Heatshield intake manifold gasket; Erick’s Racing ROM tune; AEM fuel pressure regulator; Spoon engine damper; stainless steel clutch line, fuel lines; Innovative mounts; GReddy timing belt; wire tuck

Drivetrain ‘00 Civic SI transmission; Skunk2 short shifter; ACT Stage 3 clutch; lightened OEM flywheel; Password: JDM magnetic drain plug

Suspension KSport Kontrol Pro coilovers, front and rear; Beaks lower tie bar; ASR subframe brace; Skunk2 rear lower control arms; OEM Type R subframe bar

Wheels/Tires 15 x 7.5 +40 Rega Master EVO wheels; 205/50-15 Falken RT-215 tires

Brakes OEM DC4 Acura Integra brakes, front and rear

Exterior Spoon carbon fibre front lip (VIS version for daily driving); JDM Civic SiR rear wing, headlights, taillights, moulding, SiR-S door decals; shaved front plate holes, wiper squirters, key holes; custom wiper block-off plates; USDM EG8 rear door handles; DuPont Hypnotic Teal Mica full colour change

Interior Recaro SRD seats; JDM SiR rear seats, long arm rest, coin pocket, climate control, clock, gauge cluster, cargo panel; OEM Civic EX power windows; Civic SI front upholstery, carpet; Personal steering wheel; Mexican mystery shift knob

Electronics Pioneer DEH head unit; Performance Techniques 600-watt amp; Audiobahn 6.5-inch speakers (x2), 2-inch tweeters (x4); Alpine Type-R 12-inch subwoofer; Audiovox wiring

Source [Import Tuner]

Clear OEM SPEC. Fog Light – Honda Civic 3-Door 1992-1995 (With Wiring Kit)

Product Features

OEM specification

Plug and play no modification

Wiring harness

On-off switch

Light bulbs included

Product Description

Fog functions in providing a wider beam pattern to illuminate below the normal line of sight to reduce reflected light. Good set of fog lights in your car helps you see better when driving in adverse weather conditions. Because great visibility is needed to achieve driving safety, equipping your vehicle with highly efficient fog lights is vital. Aside from being a functional component, fog lights also add to the aesthetic look of your car. The OR fog light can give your car the customized look and appeal that you want. As the part adorns the front edge of your vehicle, leaving much better and appealing impressions for your cars presence will be simple. Continually enjoy superior ride and driving experience with a stylish ride by employing quality fog lights. Cutting edge technology and engineering has been incorporated in the product design to enable it to offer reliable service life that lasts. Heavy duty materials are incorporated in the product that allows it to offer efficient performance for miles and miles of driving.

Priced at $59.36

Source [Amazon]

Honda Civic/CR-V/Fit/Odyssey CigBlue BlueTooth Combo

Product Description

Talk hands free while driving so you can keep two hands on the steering wheel. Simple single button call/hang up push button. Complete kit to install a BlueTooth hands free kit into your Honda/Acura vehicle- nothing else required- Plug and Play Specifically made for Honda/Acura factory non-amplified stereo systems. Wireless BlueTooth Phone Car Kit. Works with most BlueTooth phones. Call/disconnect button replaces the cigarette/power socket for that clean factory look. When a call comes in the stereo system mutes and rings to notify that someone is calling, you can then look at the phone caller id to see if you want to identify the number and then press the Bluetooth button to answer the call. The stereo system will automatically mute itself while you are on the phone. Product Contents: Complete BlueTooth kit including Honda Plug and Play adapter wire harness. Product Compatibility Notes: Works with most BlueTooth Phones Plug and play. Designed for non-amplified (Bose, JBL, etc.) systems. Installation Notes: Plug and Play behind radio- no wiring cutting required. In addition, works with select newer cars that are not listed – email us if you are not sure. Works with the following vehicles: Honda 2006-2009 Civic 2007-2009 CRV 2007-2008 Fit 2008-2009 Odyssey

Priced at $219

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The 2006 Honda Civic EX by Chester Yu (0)
• Honda Civic Si from 2000 (0)
• The cool old school Honda Civic Si (0)
• The 1990 Honda Civic of Eric Britton (0)
• Honda Civic, is it cool! (0)

However, that he has and this is the result, a beautiful looking machine that looks like something that Toyota would not even think was possible. Yet here these cars are, on the outside there are only a few little cosmetic touches, but underneath that square shaped body, there is a sleeping dragon waiting to get out.

Bruce Barrett – 2004 Scion XB

Engine Modification – YDR Short Ram Air Intake Strup Header Strup axle back exhaust Optima Yellow Top Battery TRD short throw shifter

Suspension – Air-Ride Suspension A.I.M. front Air Struts Slam Specialties 200 psi rear air bags (2) 3 gallon AVS air tanks Air-Zenith 200psi Air compressor Auto Pilot digital controller / valves Randode rear bag brackets

Wheels, Tires, Brakes – Motegi DP-6 Chrome 20×7.5 rims Toyo Proxy 4�s 215/30/30

Exterior Modification – Custom 2-tone tribal paint Shine Street body kit Shaved door handles, tail lights, marker lights, license plate Molded L.E.D. tails in pillars A.V.S. billet grills A.V.S. 12 function remote (doors, lights, suspension)

Interior Modification – Black leather seats All plastic smoothed and painted black Custom Fiber glass Door speaker pods Custom lighted lexan speaker covers Green leds throughout Auto Pilot digital controller Black leather Headliner with embossed tribal graphics

I.C.E. – 2 eD under seat 10� subwoofer enclosures. 1 eD 110v.2 rear subwoofer 2 sets eD e9.65i component sets 1 eD nine.4 (component power) 1 eD nine.2 (front subwoofer power) 1 eD nine.2 (rear subwoofer power) Head unit (TBD)

Sponsors – Strup (www.Strup.us) A.I.M. (www.airbagit.com) Fat City Customs (www.fatcitycycles.com)

Source [Carbon8 Mag]

H4-SCION XB 2006-2004 Headlight Xenon HID Conversion Kit-Halo Automotive 6000K Diamond White

Product Features

Halo Automotive 2 Series H4/9003 HID Conversion Kit comes with One Year Warranty

HID Conversion KIT for 2006->2004 SCION XB Headlight – Low Beams

Direct upgrade replacement of stock halogen light bulbs. NOT compatible with Installed H.I.D. systems.

Package comes with 2 x HID bulbs, 2 x Ballasts with build-in starter, Zip ties, All necessary wires and install accessories.

Super Brightness:Increased by 300%, 3000 Hours Life-Expectancy

Product Description

Halo Automotive is a leading manufacturer of Japanese lighting products utilizing the latest in Japanese design and technology. Halo is committed to providing high quality lighting products combined with warranties that are among the best in the industry. So rest assured, with reliability that stands behind our products, your purchase is only the beginning of our commitment to you. Get Halo and “Get Enlightened!”

Priced at $159.99

Source [Amazon]

Scion Xb 2004-2004 MB5 Chrome Wheels Rims and Tires

Product Description

Tire: Nankang NS II 215/35R18  84W

General: The MB5 â Warrior From The Dark Ages

Unlike its spoked brethren, the MB5 is not a rim with a spoke design but a semi full-faced wheel. This Rim is designed in a way that makes it look like a shield that the warriors of the dark ages used in the ancient times of barbaric wars and competitions. This rim comes in a dark tanned finish and is machined polished to a perfect black tan. The lighter version of the rim is more inclined to a silver finish and goes well with the tire of the car. The black version matched the tire and the silver version contrasts with the black tire. Towards the outer ends of the wheel, where the broad spokes meet the rim, the design forms a seemingly three-sided half ellipse that is carved into the face of the rim. The center of the rim is held fast to the rim with eight Allen nuts and covers the central coupling of the wheel entirely. This cover fits flush with the rest of the rim leaving no need for a hubcap that older car rims require to hide the ugly cast iron wheel and huge coupling bolts. Though the face of the wheel is black, the ring that forms the outer circle of the wheel and holds the tire in place is silver giving the wheel and the vehicle a very classy look. When purchasing Wheels and Tires Package, Package includes: style=”margin-top:5px;”> Balancing and Mounting Lug Nuts Hub Rings 4 Center Caps

Priced at $350

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The brilliant MR2 Type ONO (0)
• Is this a cool Scion or what? (1)
• (0)
• The wide body Scion xB of Mobil 1 (0)
• The Nissan 350Z ready for action (0)

But the Skyline has a pedigree, not only does it have the technology and power to match, this is car that was developed at the world famous Nurburgring racetrack in Germany, this where the famous NUR model came of age with only 750 being made, there is a distinct possibility that there are only a couple in the US.

Whether this is one of those couple or an import is not known and in fact nobody is going to let on either, what we do know it that this car is a superb example of this machine and being finished in black just adds even more mystery to the whole story.

Specs of the Dark Prince:

Exterior: NISMO front bumper, NISMO side skirts, NISMO rear skirts, NISMO rear, carbon fibre diffuser, NISMO clear front and side markers, NISMO front diffuser, chrome brackets, HID headlights

Wheels: 19×10″ Volk Racing wheels with Yokahama S-03, Rotora 8-piston front callipers with 405mm slotted & drilled rotors, Rotora 4-piston rear callipers with 355mm slotted & drilled rotors

Suspension: Tein fully adj coilovers, GReddy front strut tower bar

Engine/Drive train: Tomei fully built motor including:, balanced and blueprinted rotating, assembly, forged pistons, rods, Poncams 256/260 camshafts, springs and retainers, oil pump, oil pan baffles, ARC oil catch can, ARC titanium air rad guide panel, ARMS built turbos, Veilside downpipe, APEXI titanium cat-back, race-pipe, APEXI twin intake filters, APEXI Power FC standalone ecu with hand held commander, Blitz boost controller, NISMO twin discs clutch

Interior: Field torque splitter, NISMO g-force meter, NISMO upgraded engine, display gauges, NISMO speedo and RPM gauges, Kenwood DVD player with in-dash screen, Diamond audio speakers and amps

Source [Tunerzine]

Nissan Skyline GTR Subject Poster Print, 36×24

Product Features

Poster Title: Nissan Skyline GTR

Size: 36 x 24 inches

Product Details

Product Dimensions: 24 x 36 x 24 inches 

Product Description

AllPosters.com is the world’s #1 seller of posters, prints, photographs, specialty products and framed art. We are dedicated to bringing our customers the best selection of high quality wall décor that is perfect for their home or office. Browse our catalogue of over 300,000 items that include entertainment and specialty posters, decorative prints, and art reproductions. Whether you are looking for your favourite movie or music poster, a framed Monet reproduction, or a print of the Eiffel Tower you will find it at AllPosters.com. Visit our Amazon store today at www.amazon.com/allposters to find Special Offers and search by subject category or artist. AllPosters.com provides unmatched service with a 100% satisfaction guarantee. We ship internationally to over 80 countries. Decorate your home today with your favourite pictures.

Priced at $7.99

Source [Amazon]

Skyline GT-R: The Ultimate Japanese Supercar (Hardcover)

Product Details

Hardcover: 160 pages

Publisher: Haynes Publishing; 1st edition (July 15, 2005)

Language: English

ISBN-10: 1844251055

ISBN-13: 978-1844251056

Product Dimensions: 10.7 x 8.4 x 0.7 inches

Product Description: The Nissan Skyline GT-R is the icon among Japanese performance cars. It is almost mythical status is accentuated both by its domination of numerous motorsport divisions and by its ultimate tune ability, which has led to GT-Rs with well over 1000bhp. Only officially sold in strictly limited numbers outside Japan, the large number of grey imports in the UK, Australia and the USA have ensured that the legend has spread and the GT-R has a huge inspirational following worldwide. Although the GT-R has towering power and performance, the sophisticated chassis and cutting-edge technology mean that it can be driven safely and swiftly by almost anyone. A unique insight into the ultimate Japanese supercar.

About the Author: Andy Butler contributes to a wide range of motoring magazines, and is the author of Haynes’ well received you and Your Golf GTI, You and Your Mitsubishi Evo and ICE Manual.

Priced at $22.76

Source [Amazon]