The Tibron has been thoughtfully modified to a high standard with a lot of work done under the hood, but at the same time, there are some interesting body features in there too. However, unlike some body kits and mouldings the exterior of this Tibron has been completed with care even down to the red LED’s underneath the car and is actually an asset to the car.

The bright red finish has been taken inside too, with the exterior colour blending into the panels inside the car, which normally may be considered as being a bit tacky, but it actually suits this car. It is probably because red is the key colour and is used throughout instead of there being a mix of colours or shades.

Naturally this is not going to be to everyone’s taste, but that is what import building is all about, pushing the boundaries as far as the builder is able to go, but without going too far and making a mess of the whole thing. This car is just right with the right balance of features and styling to show that is still a Hyundai Tibron, just very special!    

These are the specs and features from the bright red Hyundai Tiburon:

CAR MAKE & MODEL – Custom Car Hyundai Tiburon 2001 Pictures

CAR COLOUR – Red

ENGINE MODIFICATIONS – s-afc engine management controller, 1.8 cam, 2.5″ mandrel bent exhaust piping, car sound performance free flow catalytic converter, apex-i n1 muffler, clutch masters stage 2 clutch, injen cold air intake, aem by-pass filter, fidanza lightened flywheel, magnecore ignition wires, ngk platinum plugs, obx underdrive pulley, obx silicone radiator hoses, hyper terminal grounding kit, bored out intake manifold, bored out throttle body, phenolic intake spacer, shark racing performance thermostat, walboro high flow fuel pump, adjustabler fpr, nx express 75 shot nitrous, carbon fibre 10 pound bottle, bottle heater, solid motor mounts, red wire loom through out, midnight wolf engine fuse cover.

SUSPENSION MODIFICATIONS – eibachs springs, kyb struts, drilled & slotted rotors.

ALLOY WHEELS – 17 x 7 azul speed 5`s in gloss gold w/ chrome lip, security lugz.

TYRES – custom tires.

BRAKES – hawk brake pads.

EXTERIOR MODIFICATIONS -authentic club gtr kit (molded front bumper, side skirts, and rear pods), kdm clear corners, kombat spoiler, red led underbody kit, 6000k hid kit, kspec tinted rear light covers, s-2000 shorty antenna, fully debadged and shaved, red led marker lights, a.r.e. front bumper canards, blue sky concepts front carbon fibre lip splitter (to be installed). Shark racing front strut bar, eibach front & rear sway bars, center floor bar, b-pillar bar w/ centre camera mount (to be installed).

INTERIOR MODIFICATIONS – fully fiberglassed and sprayed interior (same as body colour), street glow red led tubes under dash and seats, autometer a/f and voltage gauges, d.a.d racing seats, real diamond plate front & rear floormats, obx short shifter (to be installed), momo red pedal set, red & black shifter boot, red & black e-brake boot, momo e-brake handle, shark racing red dead pedal, dynamic auto design seats.

IN CAR ENTERTAINMENT – 1 farad capacitor, sound stream tarantula xta600.5 channel amp, 10″ kenwood sub, 6.5″ front kicker components, 6×9 rear kicker speakers, clarion vrx485vd 7″ wide touchscreen motorized dvd/radio head unit.

Source [Modified Cars]

Cold Air Induction Intake System with Air Filter – Hyundai Tiburon

Product Description for the Hyundai Tiburon T6061 mendrel bend polish aluminium pipe:

Cold air induction intake system for the Honda Accord is engineered to reduce intake restriction by smoothing out and straightening airflow. This design allows the Honda Accord engine to inhale a larger volume of air than the OEM air filter assembly. The extended aluminium piping amplifies the effect by delivering colder air that contains more oxygen. The greater volume of air translates into a more powerful combustion (sound). The best of both worlds is at your fingertips. Cold air intake system takes it to the next level by making installation a breeze. The short distance of the pipe allows air filter to be easily attached. The intake system comes complete with quality aluminium pipes, filters, hoses, stainless steel clamps, and brackets. Give your Honda Accord the ultra high performance look, aggressive tune and incredible horsepower gain it needs. * Does not come with CARB sticker please check with your State’s Motor Vehicle Department for regulation. Coupling and hose maybe in the colour of red/blue/black.

Priced at $62.25

Source [Amazon]

RADIATOR COOLING FAN/SHROUD ASSEMBLY for HYUNDAI Tiburon

Product Features

Direct factory replacement without alterations or modifications. Produced by leading aftermarket manufacturers. Designed to meet or exceed OEM specifications. Large items requiring Freight shipping (ie- Bumpers, Hoods, Fenders) can only be shipped to the 48 contiguous States (no international, APO/FPO, Hawaii, Alaska, U.S. territories). For these, non-residential business addresses are preferred. Some street addresses may require the item to be picked up at the nearest pickup station. These will be shipped out in 3-5 business days. If you have any questions regarding it, please contact us prior to placing the order.

Priced at $73.69

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• No related posts.

This the V6 version and as you can see from the owners images this is a truly special car with so work put into it , that it would be hard to come up with a fair valuation. That would be if the owner actually wanted to sell this car in the first place.

The body styling comes from eight piece kit, it has new seats with sponsor’s tags on and under the hood there is the little matter of a V6 2.7 litre engine with a nitrous express unit capable of delivering an extra 10 HP at the flick of a switch. But what’s with the two TV monitors on the engine cover!

Car Specifications & Information

CAR MAKE & CAR MODEL: Modified Car Hyundai Coupe V6 Wide maniac Blue

CAR COLOUR: Blue

EXTERIOR MODS: Shark Racing Hyundai Coupe 8-piece wide body kit (front and rear bumpers, four arches and side skirts), custom glass fibre and polyester extended arches, custom metal plate in front bumper with West Coast Customs logo, Veil side carbon fibre rear wing, Shark Racing fuel filler cap, deleted aerial, door mirrors, badges, rear wiper and boot lock, added carbon door mirrors, Peugeot 206 paint with White Magic flake in the clear lacquer, under-car neon’s

INTERIOR MODS: Sparco Pro2000 bucket seats with sponsor’s logos, Sabelt harnesses, interior fully stripped except dashboard, rear seats removed, custom glass fibre enclosure for ICE, glass fibre custom door enclosures with black suede, black suede centre console, Auto Meter A-pillar gauges (air/fuel ratio, volts, water temp, amp temp), monster tach, Isotta steering wheel, Sparco floor mats, two chrome nitrous bottles, interior neon lighting

ICE (In Car Entertainment, Audio & Security): JVC Mp3, DVD, 3” screen head-unit, 10 x Rockford Fosgate T152C Power speakers, 4 x Rockford Fosgate T162C Power speakers, 4 x Rockford Fosgate T112D2 Power subs, Rockford Fosgate P6002 Punch amp, 3 x Rockford Fosgate P4004 Punch amps, 19 x 7” LCD monitors, PS2 Slim, 3 x Tudor Maxxima 900 DC batteries (one in engine bay, two under custom ICE enclosure)

ENGINE MODS: 2.7-litre V6 with 75hp Nitrous Express nitrous shot, custom 2.5” straight through exhaust system with 4” ‘666’ tail-pipe twin exit, aluminium air intake cover, custom engine cover (with 2 TV monitors), oil cap smoothed over, painted matching exterior colour.

SUSPENSION MODS: Shark Racing coilover suspension lowering 12-15cm

WHEELS: 8.5×20” DUB Spine wheels, 50mm spacers in back, 30mm spacers up front (47 offset all round)

TIRES / TYRES: 235/30×20 Toyo Proxes T1R Tyres

Source [Hyundai Tuning]

Hyundai S Coupe DELUXE WIRE HARNESS

Product Description – Keep It Clean Ultra Small Deluxe 15-Fuse 38 Terminal Wiring System feature an easy to install design and expandability for future growth. Keep It Clean Wiring Systems use only the highest quality wire and parts resulting in the ultimate wiring kit. Keep It Clean Wire Systems include dedicated circuits for keyless entry units, power window systems, power seats, additional 12V output and optional accessory output. All wire is colour-coded and labelled to make installation and future wiring easier. All kits come complete with the necessary parts needed to wire up your vehicle plus a steering wheel pigtail, all wire looms, connectors and terminals. Detailed Instructions ensure a quick and pain free installation.

Ultra Small Design

GM Headlight Switch

Dimmer Switch

Keyed Ignition Switch

Custom Made Pigtail

38 Terminals

15 Fuses

Connectors & Cable Ties

Gm Colour Codes

Easy Installation

Detailed Instructions

Limited Lifetime Warranty

Priced at $349.99

Source [Amazon]

H&R Sport Springs Hyundai Genesis Coupe Type BH 2010+

Product Description

H&R Sport Springs Hyundai Genesis Coupe Type BH 2010+ Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivalled tensile strength and resiliency.

At H&R product design and development is of the highest importance. All H&R springs are “cold” wound on specially designed CNC machinery and then time-tempered to re-align the molecular structure of the steel to ensure quality and durability.

All springs are shot-peened to increase the service life of each spring by more than 200%. Each spring is then sent through the H&R exclusive “SuperBlok” system, which cycles each spring to ensure that sagging will never occur. Lastly, the H&R special powder coating process coats each spring with a flexible and durable finish that is highly resistant to corrosion, chips, and scratches. At H&R we care about quality – the whole production process, from start to finish, is done in-house to ensure the most consistent, highest quality product possible.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Features:

Superb ride quality

Lowers Front: 1.4″

Lowers Rear: 1.3″

Priced at $313.64

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Super sleek dark Mazda RX 7 (0)

This car is the work of Will Stovall, it is a 2003 model and so it is not seriously old and therefore has a few good years in it, but why waits until the car is in its final years when you put a car such as this together and add numerous years to the back end of its life.

There has been some extensive work on this car right through the range from under the hood to the external bodywork, virtually every part the car has had some sort of work done to it and it shows, as this car is stands out from the rest, unless someone has any other ideas.

Features:

Engine Modification – AEM CAI Wolfe Racing Modified Custom Upper Intake Wolfe Racing Ported And Polished lower intake Nitrous Express Hitman 75 wet shot with a single 10 lbs bottle Nitrous Express RPM Activated Nitrous Window Switch SSA V2 headers with no cat SSA Exhaust SeoulFul Racing Overdrive Alternator pulley Custom braided Black Plug Wires NGK Iridium IX Plugs Phenolic TB spacer Wolfe Racing Polished TB Billet Oil catch can Killer Glass Illuminated Radiator Hose

Engine Management – Triple Gauge with Tinted Glow shift gauges

Suspension – KYB GR-2 Performance Struts Tein S-TECH springs

Wheels, Tires, Brakes – Stock Size Brembo Drilled and Slotted rotors with Greenstuff Pads DrifZ 505b Wheels Nitto NT Neo-GEN ZR Tires

Exterior Modification – Custom 2 tone paint – Black roof with stock red on the rest Seibon VSII CF Hood Painted to match the car Concepto Grill GT-Tech Front Lip Custom Cut Billet 9-bar Grill cut to fit the Concepto Grill 6000K HIDs Diode Dynamics Angel eyes Ark-Metallix Vertical Doors Redout tails Shaved Antenna 10% Tint Midnight Wolf License Plate Delete Plate Tuscani All around Varad 1000 colour LED under body glows Facelift Headlights with blacked out ambers GT-Wing Rear Spoiler Level 1 brackets and CF side panels

Interior Modification – Paint Matched Red and brushed aluminium Interior Trim Facelift 2 Gunmetal door grips to match the Switch panes System Upgrade Billet HVAC knobs System Upgrade Billet Vent rings and Ignition Ring Red glows under the dash and in the map pockets in the doors Tuscani door light inserts Full Heated Leather seats NRG Racing Steering wheel with Sparco Wheel hub Midnight Wolf Phantom Gauge bezel – The only one for an auto ever made!!! Dino’s SUPERvision II gauges Midnight Wolf Custom Lighted Door panels Midnight Wolf “T” door light inserts

I.C.E. – Kenwood DDX-7017 Rockford Fosgate Omnifi system 2x Kenwood 9152D amps “Wasted Hatred Modified” 2x 4 channel full range amps 2x Infinity Kappa Perfect VQ 12d subs Polished! Custom built Sealed box with laser etched inlays from Midnight Wolf

Sponsors – None!

Source [Carbon8 Mag]

Python Injection 823-894 Airflow / Mass Air Sensor Fits HYUNDAI

Product Features

Exact OE replacement

No exchange of your original unit required

Every unit is thoroughly tested to meet the original equipment specifications – After it is remanufactured

Python Injection is the leader in Fuel Injection remanufacturing technology

Product Description

This Python Injection Airflow/Mass Air Flow unit is an exact replacement for your vehicle’s original unit. Every unit is remanufactured to the precise specifications of the vehicle’s original unit. Every unit goes through thorough testing after the remanufacturing process to insure that it is performing correctly. Python has been an automotive industry leader in providing high quality, inexpensive remanufactured fuel injection components since 1992. This Python Injection 823-894 Airflow / Mass Air Sensor – Fits, HYUNDAI

Priced at $127.38

Source [Amazon]

HYUNDAI Accent side marker light bulb LED side marker bulb upgrade

Product Features

Low power consumption

Easy to install and fit for most import and domestic vehicles

High Intensity LEDs in each light bulb

Super ultra bright colour bulb

Product Description

LED light travels faster and farther than any ordinary automotive light. Consume at least 10 times less power then regular bulbs and have a much longer life spends, which means you can save more money. Our new line of automotive LED light bulbs gives you all the benefits of LED lighting, which you cannot get from regular light bulbs. In addition, this super ultra bright LED features a super solid red colour; this LED replacement bulb is the coolest red light you can get for your car on the market. 1157 LED Replacement Bulb, Turn Signal Bulb Replacement – 12 Super Ultra Bright RED LED Dial 1157 Light Bulb Features: Low power consumption 12V 0.5W A fit for most import and domestic vehicles Twelve high Intensity LEDs in each bulb Super Ultra Bright Red Colour to match the rear stop, rear signal or brake lights Fit Manufacture part No. 1157, 3496, 2057, 1142, 12499, 12594 This automotive LED light upgrade car light bulb is the best fit to replace factory bulbs for brake lights, rear tail lights, side marker lights, front signal lights, rear signal lights, and reverse back up lights. For some vehicles with fast.

Priced at $12.05

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• No related posts.

However, having said that, the underneath this Hyundai is plenty of power anyway so maybe Will is right here, he already has the car underneath him, so why work on that when you can make a beautiful looking car like this one. Even the colour is right with this car, some car look wrong with certain colours yet the custom three stage Lamborghini orange paint job is so right.

Hyundai Tiburon Specs:

Engine Modification – Unfortunately, the motor does not have much done to it except for an AEM intake system. A complete Power One exhaust system was installed to make her purr like a kitten

Suspension – air ride

Wheels, Tires, Brakes – tis wheels, 275-40-19

Exterior – custom three stage Lamborghini orange paint job, 3-d taillights and projection headlights to compliment its thirteen-piece body kit. There is an orange under glow kit installed with orange LED’s in the door handle to

Accent the colour at night

Interior – the interior has some custom orange paint work to match the outside of the vehicle. Sitting in the dash is a Sony HDD deck that plays AM/FM radio, CD’s, Mp3’s, and records discs onto its memory card equipped with a built in equalizer. Three T.V.’s were installed into the car. One being 5 inches sits in the passenger visor. The two others are 7-inch monitors mounted into the headrests. For the T.V.’s there is a Pyle DVD player mounted to the back of the back seat. Currently residing in the trunk is two 12-inch RE sub woofers by USA, a RE 2000-watt 2 channel amplifier also by USA to push the sub woofers, and a Orion 600-watt 4 channel amplifier to run the highs and lows in the vehicle. In the doors there are 5?inch factory Infinity speakers, the back seat has 6 x 8 factory Infinity speakers and also a set of factory tweeters in the doors. A 2 ferret Mobile Spec compasitor was mounted in to hold extra power for the amplifiers.

I.C.E. – Sony HDD deck that plays AM/FM radio, CD’s, Mp3’s, and records discs onto its memory card equipped with a built in equalizer. Three T.V.’s were installed into the car. One being 5 inches sits in the passenger visor. The two others are 7-inch monitors mounted into the headrests. For the T.V.’s there is a Pyle DVD player mounted to the back of the back seat. Currently residing in the trunk is two 12-inch RE sub woofers by USA, a RE 2000-watt 2 channel amplifier also by USA to push the sub woofers, and a Orion 600-watt 4 channel amplifier to run the highs and lows in the vehicle. In the doors there are 5?inch factory Infinity speakers, the back seat has 6 x 8 factory Infinity speakers and also a set of factory tweeters in the doors. A 2 ferret Mobile Spec compasitor was mounted in to hold extra power for the amplifiers.

Sponsors – as of 2009 powerbass

Numbers (WHP, 0 to 60 mph and etc.) – 230

Source [Carbon8 Mag]

Hyundai Tiburon 2003 – 2005 Red Carbon Fiber Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in a Red Carbon Fibre finish.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

“The material is soft, flexible and with a real weave texture allowing it to conform to the contours

“Thin, self-adhesive, vinyl film with a textured, Red Carbon Fibre weave finish.”

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a 3 mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $40.99

Source [Amazon]

2002-2008 Hyundai Tiburon Fog Lamp Kit hid lights 06 07

Product Features

Ø (2) Genuine Hella Brand 55Watt H3 Bulbs

Dimensions – 2.75 “H, 2.75 “W, 3 1/2″D

Photometrically Designed Hardened Glass Lenses

Wiring Kit With Relay, Fuse and Illuminated Switch

Free Hat – Valued at $19.99

Product Description

This listing includes a complete fog lamp kit for use on the model shown above without the factory fog lamps or as a replacement for existing factory fog lamps. This auction includes everything needed to install and requires no other parts or extensive modification. Hella offers the performance and brightness of Xenon H.I.D. bulbs and have photo metrically designed hardened glass lenses that pierce through the darkness in any weather condition. Round glass lenses, die-cast metal housing 55W H3 halogen bulb 2 3/4 inches in Diameter 2 lamps, heavy-duty mounting brackets, LED illuminated switch, deluxe wiring harness included. Hella is one of the true leaders in the lighting industry. They produce Top notch lighting equipment that is manufactured in Germany. Hella lamps stand out as “lights with attitude”.

Priced at $64.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Totally cool looking Acura Integra (0)
• The spectacular Nissan 350Z (0)
• The New World Samurai Integra Type R (0)
• The Mazda RX7 the best of the best (1)
• The Integra DC2 in a strange green colour (0)