But now this drop head sports car is being taken on by the import builders, not that there is much to do with the exterior of this car; it is still becoming a builders dream machine. This one is owned and built by Peter Li; it is the 1992 model, although by the look of it that would be hard to tell for someone with no experience of these cars.

Finished in bright red, there is a feel for speed look to this car, sitting just a few inches off the ground the Miata has a menacing look to it and would impress any sports car owner with its grace and style. When this car was first taken on by Peter is was in immaculate condition from top to bottom and yet in true builder’s style the car has to gutted and rebuilt to its new standard.

When new, this would have come with either the 1.6 litre or 1.8 litre engine and a choice of either a four speed auto or five speed manual gearbox. It would have been producing around 120 HP, which is good enough for a car that is so light, but following the modifications under the hood the power must have been increased, although there are no figures to back this up.

These are the features and specs for the well built Mazda Miata MX 5:

Dual Mikuni Side Draft Carburettors

Harada Intake Manifold

Racing Beat 4-1 Header

Flying Miata Test-pipe

RS R GTII Exhaust

Fidanza Aluminium Flywheel

Exedy Stage 1 Clutch

HKS VPC

Engine Torque Damper

Tein Basic Coil overs

Carbing 4 Point Roll Bar

Brembo Rotors

Axxis Pads

Work Equip 03

Front: 14 x 8.5

Rear: 15 x 9

Toyo Proxes: 195/45/14-15

OEM Front Spoiler

C-Wings Carbon Hardtop

Bride Vios Low Max Seat

Bride Low Max Seat Rails

Nardi Steering Wheel

Tomei Shift Knob

Circuit Hero Shifter Extension.

Removed Soft Top

Removed A/C

Removed P/S

Removed Carpet

Source [Mazda USA]

Surco Products Removable Deck Rack

Product Description for the Deck Rack, for the 2006 Mazda MX-5 Miata:

The Surco Products Removable Deck Rack creates more space for luggage and hauling other items. Fully removable. Padded feet to protect the trunk of the vehicle. Manufactured from heavy-duty stainless steel. Electro-polished finish for an everlasting shine. Comes fully assembled. Creates more space for luggage and hauling other items. Fully removable. Padded feet to protect the trunk of the vehicle. Manufactured from heavy-duty stainless steel. Electro-polished finish for an everlasting shine. Comes fully assembled.

Priced at $196.07

Source [Amazon]

Tokico Illumina Adjustable Gas Strut Rear

Product Description of the Gas Strut Rear 1990-1997 Mazda Miata MX5:

(Rear) Built for the (90-97) Mazda Miata. For the serious enthusiast, TOKICO offers 5-position adjustable shocks and struts called Illumina. The adjustment system provides you with the ability to set your car up for a variety of uses. TOKICO Illumina adjustable shocks and struts were designed for tuning street suspensions. A simple click of a screwdriver allows you to change for ride or handling balance. So whether you are going to the track, or simply cruising, the Illumina range of adjustment can adapt to your needs. Internally, the Illumina uses TOKICO’s sophisticated multi-stage variable-aperture piston and valve system combined with a 5-position bypass shutter-valve. A detent on the shutter-valve helps adjustment ease so that you can make quick changes and still know which setting you have chosen.

Priced at $130.21

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• No related posts.

It was said that Mazda drop head coupe was based on the Lotus Elan of the 1960’s and this Mazda Miata finished in the colours and style of a Lotus Elan from that time period, just goes to show exactly how close in design these two cars are.

You have to hand it to David Wooley, who has taken this fantastic Mazda and made into something beautiful that resembles the classic Lotus of the past. A lot of care and consideration has gone into this design and despite the Mazda actually keeping its modern shape; you cannot help but to take a second glance at this car.

This is a first generation model, sporting a 1.6 litre or 1.8 litre with a five speed manual or a four speed automatic gearbox. Providing around 120 HP and up to 140 HP depending on the set up of the car. This is real classic car these days and it deserves its place as classic car with a rich pedigree.  

These are the specs for the beautiful looking Mazda Miata:

Flying Miata fully-built 1.6L engine

Wiseco 9:1 compression pistons

Carillo H-beam connecting rods

Knife edged crankshaft

Built cylinder head

Cold side coolant reroute

Ron Davis aluminium radiator

Custom cat back, centre exit exhaust

Fidanza flywheel

ACT clutch

Function 7 semi-solid engine mount

MAZDASPEED engine mount

‘99 Miata 5-speed transmission

Custom driveshaft

Guru Racing torsen-type differential Tein Flex suspension

Polyurethane bushings

Racing Beat tubular front anti-sway bar

Racing Beat modified anti-sway bar end links

Okuyama triangular strut tower brace

Okuyama lower sub-frame/transmission brace

Cannon 4-point rear sub-frame brace

Bethania Garage 6-point roll bar Good-Win Racing Wilwood big brake kit

Custom RS Watanabe F8 magnesium wheels in gold, 16×8 inch

Works Goocars polished wheels, 15×8 inch front, 15×8.5 inch rear

Rays TE-37 bronze wheels, 16×7 front, 16×7 rear Custom front clip

Pit Crew Racing nose

Custom tripod halogen headlights

Tuckin99 fender flares

Axis Power Racing carbon-fibre fenders

Simpson Design vented hood

Cruise Power composite doors

Classic Roadster mirrors

Axis Power Racing carbon-fibre trunk lid

Garage Vary nostalgic taillights and rear fascia

Simpson Design flush rear bumper (modified)

Beltline removed

Rear marker lights removed

Hard top

Custom paint Custom dash

Custom centre console

6-point seat belts

Zoom nostalgic rear view mirror

Dash frame and interior bits powder coated

Interior coated with truck bed liner for durability

Spec Miata hard top brackets

Source [Mazda USA]

Short Ram Air Induction Intake System with Air Filter – Mazda Miata 1.8L

Product Description for the Short Ram Air Induction Intake System:

Short ram air induction intake system is engineered to reduce intake restriction by smoothing out and straightening airflow. This design allows the engine to inhale a larger volume of air than the OEM air filter assembly. The greater volume of air translates into a more powerful combustion to yield more horse power. Short ram air intake system takes it to the next level by making installation a breeze. The short distance of the pipe allows air filter to be easily attached. The intake system comes complete with quality aluminium pipes, filters, hoses, stainless steel clamps, and brackets. Give your Honda Accord the ultra high performance look, aggressive tune and incredible horsepower gain it needs. * Does not come with CARB sticker please check with your State’s Motor Vehicle Department for regulation. Coupling and hose maybe in the colour of red/blue/black.

Priced at $45

Source [Amazon]

OBX Red Spark Plug Wire Set 01-04 Mazda Miata

Product Description of the OBX Red Spark Plug Wire Set:

OBX High Performance Spark Plug Wires are the highest quality and thickest wires available in today’s market. Six individually wrapped 18 strand copper cores are wrapped with a stainless steel conductor to ensure greater ignition current conduction and longer spark duration. The core is covered with a special synthetic dielectric compound that prevents all electrical leakage and arcing of the current due to microscopic cracks when aging occurs. Extra heavy duty glass braid is woven around to withstand extreme wire stretch from pulling. All of this is coated with an outer sheeting of silicone double wrap measuring 10.3mm in thickness to withstand extreme engine bay temperatures.

Priced at $30

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• A 1995 Mazda Miata (0)

The modifications appear to be mainly for looks rather than performance as the MX 5 or Miata already has plenty of speed to go round. However, for the import builder the shape and lines of the car are just as important, it is clear to see that there was no holding back when they got to work on the fantastic looking car.

The original car would have offered the choice of a 1.6 litre or 1.8 litre power plant and a four speed auto or five speed manual gearbox. Nevertheless, these engines still produce between 120 HP and 131 HP, which on a car of this size, it weighs around 2,000 lbs is pretty useful when you put your foot down and open it up.

Here are specs and features of the great looking Mazda Miata in red from 1995:

CAR MAKE & MODEL Custom Car Mazda Miata 1995

CAR COLOUR Red

ENGINE MODIFICATIONS triple chrome plated valve cover, triple chrome plated intake manifold, racing beat 4-1 header, monster flow carbon fibre intake (made for nb miata, modified to fit na), custom exhaust, test pipe replacing catalytic converter, crankcase filter, magnacor spark plug wires, arc radiator cap, polished stainless steel radiator cowl cover, bosch platinum plus 4 spark plugs, mobile one 5w30 synthetic oil, megan racing strut bar, diy hood lift, crazy reds air horns.

SUSPENSION MODIFICATIONS flyin` miata springs, kyb shocks.

ALLOY WHEELS custom wheels

TYRES hankook tires, spare tire relocate kit (mounted under car).

BRAKES hawk brakes.

EXTERIOR MODIFICATIONS bsp fuel lid, r-package front lip spoiler-painted classic red, r-package rear lower lip spoiler-painted classic red, r-package trunk spoiler, rocker panels painted classic red, custom polished aluminium turn signal intakes, custom polished aluminium lower grill, black altezza lights, led stop/turn signal, custom led third brake light, flashing third brake light mod, roadster third brake light, custom led turn signals-front, bsp low-profile headlights.

INTERIOR MODIFICATIONS miata popular equipment package: power-assisted steering, leather-wrapped steering wheel, power mirrors, aluminium alloy wheels, torsen limited-slip rear differential, head-restraint speakers, cruise control, power windows and automatic power antenna, miata leather package: popular equipment package items, plus tan interior with leather seating surfaces and tan vinyl top, bsp style bar, engine start button, personal neo grinta 350mm steering wheel, nardi hub, mazdaspeed red horn button, import intelligence red instrument gauges, stainless steel vent rings, custom polished aluminium door handles, aerodramatics chrome door pulls, aerodramatics chrome door lock buttons, aerodramatics chrome door cups, roadster emblem under stereo, finish line performance shift knob, i.l. motorsports chrome e-brake handle, sullivan racing “roadster” billet aluminium racing pedals, jdm “roadster” polished stainless steel door sills, jdm non-airbag seatbelts, whistler pro-3450 remote mount radar detector, custom floor mats, custom led maplights in sun visor holes, custom led`s in stock miata maplight.

IN CAR ENTERTAINMENT street wires cables, black widow 2-way alarm with radar sensor, 1 farad stiffening capacitor, xtant 3300c amplifier, infinity reference 4″ (in headrests), kenwood cd/mp3 stereo-custom mounted, infinity reference 6 1/2s. kicker comp vr 8″ sub (in custom fibreglass foot well enclosure).

Source [Modified Cars]

OBX Red Spark Plug Wire Set 2005 Mazda Miata 1.8l

Product Description of the OBX Red Spark Plug Wire Set 2005:

OBX High Performance Spark Plug Wires are the highest quality and thickest wires available in today’s market. Six individually wrapped 18 strand copper cores are wrapped with a stainless steel conductor to ensure greater ignition current conduction and longer spark duration. The core is covered with a special synthetic dielectric compound that prevents all electrical leakage and arcing of the current due to microscopic cracks when aging occurs. Extra heavy duty glass braid is woven around to withstand extreme wire stretch from pulling. All of this is coated with an outer sheeting of silicone double wrap measuring 10.3mm in thickness to withstand extreme engine bay temperatures. OBX wires are compatible with all types and brands of spark plugs on the market today to increase voltage output and provide maximum combustion on today’s high performance engines. These wires have been dyno tested to significantly increase horsepower and torque on both stock and modified engines over OEM ignition wires.

Priced at $30

Source [Amazon]

Mazda Miata (1.6L) Weapon-R Secret Weapon Intake System

Product Description of the Weapon-R Secret Weapon Intake System:

“The Weapon-R Secret Weapon Intake System was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one travelling at higher speeds than the other does. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminium on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence.”

Priced at $198.95

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• Well modified Honda Civic SI (0)
• Toyota Supra RZ from Japan (0)
• The Top Speed inc Subaru Impreza (0)
• The Scion TC Sports Coupe Drifter (0)
• The Nissan Altima Coupe That Rocks (0)

This car is owned by Jennifer Staton and it does her so much justice because this is a car that is not over built, it has be lovingly restored to better than it was when it first came off the production line and that is saying something.

There have not been too modifications on the Mazda, although you can still get around 140 HP out it and for a car of that size is pretty good stuff. This is a nice small car that looks really cool.

2000 Mazda MX-5 Miata LS

Engine Modification – K&N Drop-In Air Filter NGK Spark Plugs & Wires

Wheels, Tires, Brakes – 17″ Motegi Racing

Exterior Modification – Blacked out Tailights Blacked out Sidemarkers Custom License Plate Aftermarket Fog Lights Painted Callipers

Interior Modification – Bose System Nardi Torino Steering Wheel

Numbers (WHP, 0 to 60 mph and etc.) 140 hp, 1.8 litre I-4

Others – Feb. 7th 2009 Auto log Front Cover Profile! Feature Ride on 08-Feb-09-Online Car Show February 2009 Profile Winners (auto log) BlueRx8 Third Place Winner (9.160% of votes) (auto log)

Source [Carbon8 Mag]

Mazda MX-5 Miata DELUXE WIRE HARNESS

Product Description – Keep It Clean Ultra Small Deluxe 15-Fuse 38 Terminal Wiring System feature an easy to install design and expandability for future growth. Keep It Clean Wiring Systems use only the highest quality wire and parts resulting in the ultimate wiring kit. Keep It Clean Wire Systems include dedicated circuits for keyless entry units, power window systems, power seats, additional 12V output and optional accessory output. All wire is colour-coded and labelled to make installation and future wiring easier. All kits come complete with the necessary parts needed to wire up your vehicle plus a steering wheel pigtail, all wire looms, connectors and terminals. Detailed Instructions ensure a quick and pain free installation.

Ultra Small Design

GM Headlight Switch

Dimmer Switch

Keyed Ignition Switch

Custom Made Pigtail

38 Terminals

15 Fuses

Connectors & Cable Ties

Gm Colour Codes

Easy Installation

Detailed Instructions

Limited Lifetime Warranty

Priced at $349.99

Source [Amazon]

MAZDA MIATA MX-5 04-05 Brake Rotors – Cross-Drilled Slotted – Front Set

Product Features

Make: MAZDA

Model: MIATA MX-5

Year: 2004 – 2005

Specs: Normal Suspension

Note: Listing is for 2 FRONT Brake Discs

Product Description – Cross-drilled and slotted rotors give the maximum braking for performance cars under all necessary braking conditions. Precision machined holes or slots on the rotors will allow hot gases from brake pad to escape quickly to prevent skidding or locking up. It also provides quicker response to improve faster stopping power and enhancing the look of your car. Each rotor is also zinc plated to prevent rusting and made of the best quality metals. Cross drilled and slotted patterns are precisely CNC machined for perfect fit to OEM specs for use with stock callipers and stock wheels. No other modifications are needed. Features: R1 Exclusive Double Drilled and Staggered Holes R1 Exclusive Diamond Slots Super Accurate CNC Computer Machining All Holes Chamfered Stronger Castings with Premium Iron and Double Disc Grinding Black Electro-Coated Finish

Priced at $77.40

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The All Star Mazda MX 5 Racer (0)

The body on this model comes as two piece design and the hardtop too, although a lot of owners like to take the rear glass out for safety reasons, these is easily done on these units without the need for cutting or anything like it.

A serious car needs serious wheels, in this case Work Equips would do nicely the 15 x 11 (195/50R15) and 15 x 11 (205/50R15) makes for some great track ripping scenes, if that is what the owner likes of course.

It is great to see car that is something different to what we seem to get a lot of the time, Mazda’s are cool cars, and they always have been. However, the problem for builders is, that when looking for an early nineties car in reasonable condition it should be noted that they get few and far between as time moves on.  

Fast Facts

1992 Mazda Miata (NA6CE)

Owner Mike Burlas

Hometown Walnut, CA

Daily Grind Custom Body Builder, owner of Autokonexion

Under The Hood T3/T4 turbo; Advance Racing top mount turbo manifold; GReddy BOV and boost controller; TiAL waste gate; Donnie’s piping; Spearco intercooler; 305cc injectors; Bosch fuel pump; Vortech FMU; NGK plugs and wires; HKS turbo timer; custom downpipe and exhaust

Stiff Stuff TEIN springs; KYB AGX struts; Eibach front sway bar

Rollers 15×9″ Work Equip 03 (front), 15×11″ Work Equip 01 (rear); 195/50R15 Falken Ziex ZE-512 (front), 205/50R15 Falken Ziex ZE-512 (rear)

Outside Autokonexion custom widebody, fastback conversion, carbon hood, trunk and Version 2 body kit; APR mirrors and GT200 spoiler; Xenon HID conversion; BASF Milano Red paint; flat black stickers from J’s Graphics

Inside Sparco Sprint seats; Momo Monte Carlo steering wheel and hub; NRG quick release; Pivot oil pressure and water temperature gauges; Auto Power roll cage ice Eclipse AVN-5424 head unit and speakers

Source [Super Street Online]

90-97 MAZDA MIATA MX5 HALO HEADLIGHT CONVERSION KIT

Product Details

Shipping Weight: 4 pounds

ASIN: B001DNKMQ0

Product Description

This is a 6024 Halo sealed beam conversion kit This kit features:li2 7″Round Diamond cut sealed beam conversion housings with Halo’sli2 H4 Xenon HID bulbs rated at 65/55 Watts, with an output of 90/100 Watts (Will not harm your cars factory wiring)li2 rubber covers (to keep the housings dry)liPlug and play no rewiring is necessary liHalo’s can easily be wired to your parking lights, turn signals, or to a separate switch This kit really lights up the road better than traditional halogen sealed beams. You will notice a significant increase in lighting. Your car will light up the road like it never has before! Now you can have your car project a clean bright white light with a bluish glow just like the newer luxury cars

Priced at $49.95

Source [Amazon]

Mazda Miata MX-5 1990 – 1997 Porsche Yellow Dash Kit

Product Features

This vinyl dash kit includes all the self-adhesive pieces as shown in a Yellow.

The dash kit can be removed without damaging your vehicle’s interior.

It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.

The material is soft and flexible allowing it to conform to the contours and blend seamlessly.

“Thin, self-adhesive, vinyl film with a Yellow finish.”

Product Description

“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a three mil thick, vinyl that is available in a wide variety of high gloss colours and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive, which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is pre-cut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim panelling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”

Priced at $35.99

Source [Amazon]

Post from: RideYourPimp.com - Ride Your Pimp! - Import Cars Tuner Blog

Related posts

• The Mazda RX7 the best of the best (1)
• Mazda RX7 in silver (0)
• A super cool blue Mazda RX-7 FC3S (0)
• Toyota Corolla from 1974 (0)
• Totally cool looking Acura Integra (0)