This particular car has been the work of Justin Pawlak and the Bergenholtz Racing team, along with Nitto Tire. The Mazda RX-8 Drifter they have come up with is something very special indeed not only is it powerful, it produces over 600 HP, but the car has specifically built for the purpose and it delivers everything that the driver needs when they need it most.

Originally the car would have been built with a 1.3 litre engine producing at the basic level around 150 HP, but later variations of the car offered the buyer the choice of different levels all the way up to 250 HP. For a road going car that is something very exceptional indeed, but then again the Mazda RX 8 is an exceptional vehicle, it may be misunderstood but it is one of the best.

These are the specs of the Bergenholtz Racing 2009 Mazda RX-8 R3:

Owner: Bergenholtz Racing Inc.

Drift Pilot: Justin “JTP” Pawlak

Chief Data Analysis And Tuning: Ed Bergenholtz

Crew Chief: Brian Benson

Car Chiefs: Kurt Gasper, Rommel Figueroa

Builder: Ron Bergenholtz and Steen Chassis

Power: 600hp, 480 lb.-ft. of torque at 14psi of boost pressure

Motor: Mazda 3-Rotor, all assembly and engineering performed by Kyle Mohan of Mazdatrix

Dry Sump:  Star Mazda 3-stage dry sump setup with Peterson 3-gallon sump tank. All lines engineered by Baker Precision Bearings

Injectors: 1st stage: 600cc, 2nd stage: 1,000cc

Intake Manifold: Custom Steen chassis unit with GM Z06 90mm throttle body

Spark Plugs and Wires: NGK

Turbo Manifold: Burns Stainless Inconel by Steen Chassis

Turbo: Tial GT40XSPL configured by Tod Kaneko

Wastegate: Tial 600mm unit

Blow-Off Valve: Tial

Intercooler: HKS

Radiator and Oil Coolers: Mishimoto

Air Filter: AEM

Fuel Pump: Product Engineering

Fuel Regulator: Aeromotive

Cooling System: Stewart water pump and recovery tanks

Plumbing: All Baker Precision Bearing Ultralite lines Transmission: HKS Sequential 6-speed transmission

Clutch: OS GIKEN Twin Plate

Driveshaft: Driveshaft Shop

LSD: OS GIKEN 1.5-way

Axles: Driveshaft Shop 1000hp units complete with hubs Spring and Shocks: 3-Way Competition Adjustable Coil Overs

Sway Bars: Speed Source front sway bar and KW rear sway bar

Roll Cage and Chassis Engineering: Steen Chassis

Front Suspension: Complete custom upper and lower arms engineered by Steen Chassis

Rear Suspension: Speed Source custom adjustable arms

Front: 5:AD Model:S5F, 19 x 9.5

Rear: 5:AD Model:S5F, 19 x 10.5

Front: Nitto NT05 275/30/19

Rear: Nitto NT05 235/35/19

Paint: Aurora Blue Mica applied by Sam’s Auto Land in Gardena, CA

Wing: APR GTC-500 Wing with Steen Chassis Mounts

Door and Trunk lid: SEIBON Fibreglass

Custom door sill and quarter panel: Troy at 5:AD

Hood: Custom from Steen Chassis

Seats: Sparco Pro 2000

Seatbelts: Sparco

Steering Wheel: Sparco Champion

Mirror: McKenzie’s wink mirror

Roll cage:  Steen Chassis

Instrument Cluster: MOTEC ADL

MOTEC M800

MOTEC Dual CDI-8

MOTEC ADL

MOTEC complete wiring

MOTEC PDM (Power Distribution Module)

Motor tuned by Eric HSU of XS Engineering

Source [Mazda USA]

AEM 21-485P Polished Cold Air Intake System

Product Description of the AEM Cold Air system:

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. However, that’s only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine’s resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding “Off Road” and “Hybrid” systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.

Priced at $325.49

Source [Amazon]

Mazda Rx-8 03+ ICHIBA Wheel Spacers Version II 25mm

Product Description of the Version II wheel spacers:

Description: Version II wheel spacers are made from Aluminium/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it’s time to bolt-on without any swap studs hassles. These are hub centric spacers that is specifically made to each vehicle; will fitted on your vehicle’s original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll centre. This simple modification increases lateral stability, which in turn provides improved handling & greater safety. Note: Sold as one pair (2pcs) Fitment : Chrysler Laser 90-94 Chrysler Sebring 96+ Dodge Caliber 06+ Dodge Stealth 91+ Dodge Avenger 07+ Eagle Talon 89-99 Ford Probe 93-97 Ford Escape 01+ Ford Fusion 06+ Hyundai Azera 06+ Hyundai Elantra 07+ Hyundai Sonata 06+ Hyundai Tiburon 03+ Hyundai Xg300 Xg350 01+ Hyundai Santa Fe 01+ Hyundai Tucson 05+ Hyundai Veracruz 07+ Kia Amanti 04+ Kia Optima 01+ Kia Sedona 02+ Kia Rondo 07+ Kia Sportage 05+ Mitsubishi 3000Gt 91-99 Mitsubishi Eclipse 89+ Mitsubishi Lancer EVO 8 9 10 03+ Mitsubishi Galant 04+ Mitsubishi Endeavor 04+ Mitsubishi Outlander 03+ Mitsubishi Diamante 92+ Mazda 626 93-97 Mazda Mazda 3 04+ Inc. Mazdaspeed Mazda Mazda 5 04+ Mazda Mazda 6 04+ Inc. Mazdaspeed Mazda Miata 06+ Mazda Rx-8 03+ Mazda Millenia 94-02 Mazda Mx-6 93-97 Mazda Protege 5 Mp3 99-04 Mazda Tribute 01+ Mazda CX-7 CX-9 07+ ¡@

Priced at $140.99

Source [Amazon]

A hybrid car is never going to be a seriously fast car, the whole object is to conserve energy and therefore the car is not going to be able burn off a Nissan GT-R no matter how hard they tried. However, placing a car up against a lawn mower, surely the car is going to win, no way is the mower going to have enough acceleration to beat off a full size car. Even if it is a Toyota Prius, unless it has some extra power, may a state-of-the-art Garrett GT line of turbocharger or even some serious NOS Nitrous Oxide System.

Well the we cannot say that we are surprised at the outcome of the speed trail, but it was a woman driver, maybe she was still checking her make up in the rear view mirror when the race started! Of course, women do not really do that in stationary vehicles do they?

Source [Examiner]

Specs of the Toyota Prius four piece ground effect body kit:

3dCarbon 691710 2010 Toyota Prius Five Axis Design 4-Piece Ground Effects Kit – Unpainted. Product Features

Through utilizing state-of-the-art Computational Fluid Dynamics (CFD) software in the design process.

The Five Axis Design Toyota Prius aero kit helps maintain the Prius remarkable 0.25 coefficient of drag, while also enhancing down force.

The styling kit is manufactured in high-pressure injected moulded polyurethane.

The Front Air dam is attached with screws in the wheel wells and OE approved 3M Double face tape around the perimeter. The Side Skirts attach to the side of the vehicle with screws in the wheel wells and OE approved 3M double face tape against the body. The rear lower skirt attaches directly to the Factory Bumper with Screws in the wheel wells and OE approved 3M Double face tape around the perimeter.

4-Piece Aero kit includes: Front air dam, right and left side skirts & rear lower valance.

The styling kit is manufactured in high-pressure injected moulded polyurethane. The Front Air dam is attached with screws in the wheel wells and OE approved 3M Double face tape around the perimeter. The Side Skirts attach to the side of the vehicle with screws in the wheel wells and OE approved 3M double face tape against the body. The rear lower skirt attaches directly to the Factory Bumper with Screws in the wheel wells and OE approved 3M Double face tape around the perimeter. 4-Piece Aero kit includes: Front air dam, right and left side skirts & rear lower valance.

List Price: $1,195.00

Price: $999.95 

You Save: $195.05 (16%) 

Priced at $999.95

Source [Amazon]

Specs of the new air vent filter for Prius AC:

01-07 Toyota PRIUS Cabin Air Filter NEW Vent AC Car Product Features

One NEW Cabin Air Filter shown above that fits the following vehicles:

Vehicle Years: 2001 2002 2003 2004 2005 2006 2007

Vehicle Model: Toyota PRIUS N/A

Maintain a healthier environment in your car by reducing exposure to over 40 common exhaust pollutants and allergens.

100% compatible, direct fit OEM replacement filters are easy to install, generally in less than 15 minutes.

TYC High-Efficiency vehicle Cabin Air Filters eliminate more than 99% of common air pollutants to guard the health of your passengers. Grille mounted vehicle air intakes can concentrate pollutants and dust inside your car up to 6X (600%) compared to outside air. Manufacturers recommend replacing your the cabin air filter after 12 months, or 12,000 miles because air filter effectiveness drops significantly after the first year of operation. Reduce airborne soot, smoke, pollution, pollen, mold, pet hair and dander in your car. Remove hazardous chemical compounds found in smog and automotive exhaust. Help maintain peak operating efficiency of heating and air conditioning systems.

Prices from $8.25

Source [Amazon]

The one special thing about Macau is the road racing that goes on in the region, like Monte Carlo, Macau is a fantastic place to race cars and many more races are held there than in Monte Carlo and to get an idea of what it is all about check out the video below.

Some information About KC Racing & VAG Technik:

KC Racing established by our managing director, Mr. Philip Yau in 1999 as a motor racing team based in Zhuhai International Circuit in China. He managed and drove in touring cars racing series in China, Macau, Thailand and Malaysia. His race highlight would be finished 2nd position in Macau Gaia Race (Division 1) in 2003. With his racing experience, in 2003, we have opened his fully equipped tuning company KC Racing Project & Engineering Limited in Fotan, New Territories in Hong Kong, specialized in performance tuning and engine building for Japanese vehicles and authorized distributor for many reputable American, European and Japanese tuning products from Auto Select, Crawford, Inline Pro and many more. In 2003, we have built a circuit racing Honda S2000 and won 2nd position in Macau Road Sport Race. During 2004, a 640hp Mitsubishi Evolution 8 race vehicle in full carbon fibre trims, which we won podium position in Supercar Challenge Series in Zhuhai, China in 2004. This year, we are building a Subaru Impreza Type R to enter into this year’s race events.

Source [GTR Blog]

H&R RSS Club Sport Coilover Springs F 570 R 460 Ford GT 500 V8 incl Convertible 07+

Product Description – H&R RSS Club Sport Coilover Springs F 570 R 460 Ford GT 500 V8 incl Convertible 07+

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivalled tensile strength and resiliency. At H&R product design and development is of the highest importance. All H&R springs are “cold” wound on specially designed CNC machinery and then time-tempered to re-align the molecular structure of the steel to ensure quality and durability. All springs are shot-peened to increase the service life of each spring by more than 200%. Each spring is then sent through the H&R exclusive “Super Blok” system, which cycles each spring to ensure that sagging will never occur. Lastly, the H&R special powder coating process coats each spring with a flexible and durable finish that is highly resistant to corrosion, chips, and scratches. At H&R we care about quality – the whole production process, from start to finish, is done in-house to ensure the most consistent, highest quality product possible.

These springs are for use with the RSS Club Sport Coilovers only.

Lowers Front: 1.2 – 2.7″

Lowers Rear: 1.2 – 2.5″

Rates: F 570#, R 460#

Requires P/N: RSS29170.

Priced at $415.64

Source [Amazon]

Agency Power Adj. Twin Blow Off Valves Nissan GT-R 09+

One important facet on turbo charged vehicles is the factory blow off valve also known as the recirculation valve. Because the Nissan GT-R features a twin turbo setup, there is 1 blow off valve on each intercooler pipe. With stock recirc valves, they relieve the pressure from the intercooler pipe back into the intake pipe which then goes into the turbo causing turbulence. This slows down the turbo spool up between shifts. However running an aftermarket blow off valve at a 100% atmosphere can cause MAF issues because there is no air being metered back. For modified cars running higher boost pressure, factory recirc valves can also leak boost from the OEM design at higher RPMs. Agency Power’s blow off valves have been proven successful on many other vehicle applications with each holding up to 30psi of boost. With its adjustability knob on top to dial in your spring tension, the CNC machined 6061 aluminium component can be setup to run either 100% atmosphere or 50/50 for best performance. With the 50/50 setup, the blow off valves will still dump air back into the intake, but most will vent to atmosphere giving you that swoosh sound and keeping the turbos spooled between shifts. The anodized body with laser engraved Agency Power name includes a bolt on flange to mount the blow off valve on the stock or aftermarket intercooler piping. These kits are sold as a pair and come in black, blue, red, or silver. They fit all 2009 and up Nissan GT-Rs.

Priced at $495

Source [Amazon]

However, it is not all about looks as this Mitsubishi Eclipse is something a little more than just a show car it is a racer with a nice 270 hp at 5750 rpm and the torque of 250 at 3750 rpm? This is clearly a car that means business or rather the man behind the wheel, Luis Bocanegra is!

Yet as we check over the specs there is only minor although important changes to the cars original specs, so clearly this build has been correctly working on all of the right bits and leaving the flashing and fancy bits to the rest, preferably to those behind the Mitsubishi!

Specs of the Mitsubishi Eclipse:

Engine Modification

Injen RS Series Race Division Intake Systems

RalliArt JDM Hyper Ground System

OBX Exhaust Muffler

OBX High Flow Cat Converter

Suspension

Tenzo-R Lowering Springs

KYB Shocks and Struts

Y2K Motors Custom Carbon Fibre Wrapped Strut Bars (front upper, rear upper and rear lower)

Wheels, Tires, Brakes

Voxx Toscana 17X7 5-114.3 wheels powder coated black

Sumitomo HTRZ II 215/45ZR-17 87W BSW tires

Rotora Sloted Disc Rotors

Exterior

3D Carbon Dive Planes

Razzi Ground Effects

Factory Colour Keyed Rear Spoiler

Chrome Exhaust Tip

TYC Carbon Fibre Tail Lights

TYC Titanium Projector Headlights

Plasma Glow Led Under Car Kit

Interior

Dojo Carbon Fibre/Titanium Shift Knob

Dojo Carbon Fibre Racing Pedals

I.C.E.

Sony Xplode AM/FM/CD/MP3 Player head unit with XM Radio

Sony Playstation 2 Slim

Panasonic Motorized In-dash Monitor

DUB MAG Audio (two (2) Amplifiers, one 400W x 1 and one 100W x 4; two (2) 5.25″ component speakers with tweeters and crossovers (PH: 160W RMS); two (2) 6″x9″ speakers (PH: 100W RMS), two 10″ subwoofers (PH: 200W RMS)

Numbers (WHP, 0 to 60 mph and etc.)

HP: 210@5750 RPM – Torque: 205@3750 RPM

Source [Carbon8 Mag]

StrongArm 4952R Mitsubishi Eclipse Hatch Lift Support (R) 1995-99, Pack of 1

Product Features

Exact fit, OE quality design ensures easy installation and precise operation

No special installation tools required

Rubber O-Ring piston seal forces the fluid efficiently through the valving components providing consistent performance

Patented Multi-Lobe Seal makes gas springs more tolerant to vibration and temperature extremes

Individually tested for performance and reliability

Product Description

StrongArm gas charged lift supports are custom engineered and manufactured beyond industry standards to provide smooth operation and durability. The hardened chromium plated steel shaft is precision ground and polished for superior corrosion resistance and leak free sealing. The self cleaning piston assembly automatically opens during each compression cycle to keep the orifice clear of fluid contaminants and provide smoother operation and reliable performance. Most units also utilize StrongArm’s patented temperature compensation module valve which ensures consistent operation even in extreme weather conditions. It does so by compensating for normal gas pressure changes caused by temperature variations. The metallic upper bushing is manufactured with bearing quality precision to provide exact fit with piston rod and promote a long operating life.

Priced at $25.67

Source [Amazon]

OBX Yellow Spark Plug Wire Set 00-05 Mitsubishi Eclipse/Galant 2.4L SOHC 4G64

Product Features

10.3mm heavy-duty quality construction 100% silicone double wrap

High strength fibreglass braid for added “pull strength”

Stainless steel plug terminals for high electrical conductivity and corrosion resistance

Backed By Manufacturer Limited Lifetime Warranty

(Product shown for colour reference only)

Product Description

OBX High Performance Spark Plug Wires are the highest quality and thickest wires available in today’s market. Six individually wrapped 18 strand copper cores are wrapped with a stainless steel conductor to ensure greater ignition current conduction and longer spark duration. The core is covered with a special synthetic dielectric compound that prevents all electrical leakage and arcing of the current due to microscopic cracks when aging occurs. Extra heavy duty glass braid is woven around to withstand extreme wire stretch from pulling. All of this is coated with an outer sheeting of silicone double wrap measuring 10.3 mm in thickness to withstand extreme engine bay temperatures.

OBX wires are compatible with all types and brands of spark plugs on the market today to increase voltage output and provide maximum combustion on today’s high performance engines. These wires have been dyno tested to significantly increase horsepower and torque on both stock and modified engines over OEM ignition wires.

Priced at $40

Source [Amazon]

So this is no ordinary car this is a real racing machine that has all of the looks of a winner, but it is not just looks that make a winning car there is an awful lot of planning and cash needed in order to produce a winning combination. The team have been using a range of parts locally sourced from Topmix International.

The car has been out on track, they tested it at the Zhuhai International Circuit in China, and the best time was a 1.47.9 minute lap, which by all accounts is an average time. although the weather hot, the fuel was not up to much and the team had to lower the boost to around 1.2bar, so they did not have much going for them on this occasion.

Engine Modifications

•Haltech Platinum PRO R35 GT-R ECU

•HKS Mushroom Air Filters

•Custom Turbo Intake Piping

•Custom blow off valves

•Custom turbine outlet pipes

Cooling Modifications

•Custom extended sump

•Custom oil catch can

•Custom cold air intake

•Transmission oil cooler with pump

•Dual rear mounted engine oil coolers

•Dual engine oil cooler electric fans

•95℃ fan switch sensor

Suspension

•Ohlins 3-way adjustable coilovers

•Custom adjustable front upper arms

•SSR Type-C 19″ Wheels

•Hoosier R6 Tyres

Aero/Cosmetics

•Topmix Carbon Fibre Aero Front and rear bumpers

•Topmix Carbon Fibre Hood

•Topmix Carbon Fibre Engine covers

•Topmix Carbon Front Fenders

•Topmix Carbon Doors

•Topmix Carbon Roof

•Topmix Carbon Front Lip and Rear Under spoilers

•Topmix Carbon GT wing

Other Modifications

•Recaro Pole Position Seats

•Endless MX72 Brake Pads

•Defi Link Meter Gauges

Source [GTR Blog]

Ultimate Racing EVO (03-06+) GT35R Full Turbo Kit #5101

Product Description

The Ultimate Racing full bolt on turbo kit has helped some of our customers propel their EVO’s into11.5 quarter mile times.

Ultimate Racing Turbo Kit Includes:

-GT35R Twin Ball bearing turbo (650HP capable)

-UR Equal Length Manifold

-Tial 38mm Waste gate

-Stainless Waste gate Dump Pipe

-3″ Stainless Steel o2 housing

-Stainless Turbo Outlet Pipe

-3″ Stainless Intake Pipe

-All lines, Hoses, fittings, etc.

Fits: Mitsubishi Lancer Evolution IX

Part # UR5050

Priced at $5,393.55

Source [Amazon]

H9-NISSAN GT-R 2009 High Beams Head light Bulbs-HALO 4500K Icis Blue

Product Features

One pair Halo H9 Halogen Bulbs

Replace for 2009 NISSAN GT->R Headlight – High Beams

Direct upgrade replacement of stock halogen light bulbs. NOT compatible with Installed H.I.D. systems.

Made in Japan w/1 year Warranty,4500K Icis Blue!

Product Description

Halo Automotive is a leading manufacturer of Japanese lighting products utilizing the latest in Japanese design and technology. Halo is committed to providing high quality lighting products combined with warranties that are among the best in the industry. Therefore, rest assured, with reliability that stands behind our products, your purchase is only the beginning of our commitment to you. Get Halo and “Get Enlightened!”

Priced at $29.99

Source [Amazon]

Could this be the coolest Nissan 240SX in the country if not the world? If it isn’t then we would like to see the car that beats this wonderful machine from Dennis Som. As you plainly see the car is a convertible, but that is no ordinary hood on there because it is the Tsunami Silvia hood one of only two in the US made by DDrug.

Ordinarily the colour would not be top of the list for build, either as it is just too orange, but the longer that you at the car the better the body work looks. This is an orange machine that people like, if this colour was on a Neon or something similar the driver would be laughed at.

Naturally, this sort of job does not come cheap and it is fortunate that the owner has managed to get a nice amount of sponsors behind him, which is always going to help when you are planning to get a car to this sort of level.

Engine Modification

Sr20det

OEM S15 rods

ARP studs

Blitz FMIC

Buddy club Spec II exhaust

Cometic Head gasket

CP pistons

Greddy catch can

Greddy oil pan

Greddy downpipe

Greddy radiator cap

Greddy rocker arm stoppers

Greddy oil cap

HKS Super Sequential BOV

Ill garage dual 10 inch fans

Koyo radiator

Meagan racing turbo outlet

NGK spark plugs

Taka stainless steel braided turbo lines

Tpros exhaust manifold

Walbro fuel pump

Custom paint “Midnight black?valve cover

Custom 3 inch straight pipe

manual boost controller

Stainless steel braided clutch line

Slim battery

S15 Rods

polished crank

Suspension

Braided steel clutch line

D1 Project mu rear

Drift line 15mm spacers front

Drift line 5mm spacers rear

Drift line tension rods

Greddy front strut bar

Hawk plus pads front

Peak performance inner tie rod

Peak performance outer tie rod

Peak performance extended studs

Stance GR+ Pro

Slotted rotors

Tanabe front sway bar

Tanabe rear sway bar

Custom rear strut bar

Custom lower rear strut bar

Wheels, Tires, Brakes

Work Stitch Evolutions front 18×9 +16

Work Stitch Evolutions rear 18×10 +12

Federal SS-595 225/40/18

Exterior

Silvia conversion

OEM Silvia brick head lights

OEM Silvia corner lenses

A1 motorsports aero kit

A1 motorsports single vent front over fenders

DDrug Tsunami Silvia hood (only one in America, 1 of 2)

GTR Silvia grill

Origin Red/clear tails

S2000 rear antenna

Supermade rear wing

Custom JDM license plate holder

Interior

Air spencer JDM air freshener

Autometer pillar pod

Bride Brix II

Greddy shift knob

Greddy seat belt pads

Pioneer cd player

SPW boost gauge

SPW carbon fiber water temp gauge

SPW carbon fiber oil gauge

Sony carbon fiber speakers

Sparco flash 5 steering wheel

Sparco hub and quick release

Sparco 4 pt harness

Custom seat rail

Custom 4point roll cage

Custom Fur de leis interior panel print

Sponsors

Driftlineusa.com

Monkey in a dryer.com

A1-Motorsports.com

CItytireonline.com

Onetongarage.com

Illgarage.com

Jaded performance

and to my biggest sponsor, Noah Sailer for always helping out with everything I need!

Numbers

Est. horsepower 250-280

Est. quarter mile 12.8 seconds

Source [Carbon8 Mag]

Secret Weapon Intake (Nissan | 240SX | 91-94)

Product Description

The air filter can be totally taken apart and cleaned. The foam is denser and more thicker than the Dragon filter.

The velocity stank inside the air filter is a TRUE VELOCITY STACK. The Air filter has Ram Air capability, by hooking up the hose to the top of the air filter.

The intake has another Air Passage way inside the intake pipe to create a Air Fusion, imagine 2 different pathways of air inside the intake pipe, one air traveling in pathway #1 going 2 x faster than pathway #2. When the two different pathways of airflow meet at the end of the pipe they create a fusion effect which enhances the AIR SPEED of the by 3 times.

The Secret Weapon Intake Systems is an result of countless hours of testing and tuning of air intake velocity, Airmass and Airspeed for each vehicle application. The Result, an intake system that performs better than any Cold Air Intake, but with a Short Ram. It is possible by Weapon*R’s Patent Pending Speed Velocity theory, By creating a higher airspeed in the intake path you increase airmass and airspeed, which greatly increase horsepower.

This is possible by Creating two different paths of airflow, both flowing at different airspeeds, due to the tubing diameter in which the air is traveling. Now when the two different paths of air meet, they create a vacuum, which is where the airspeed starts to multiply, forcing more air into the engine at a higher rate, creating more horsepower.

The Secret Weapon Intake Systems are carefully CNC mendrel bent out of 6061 Aluminium, and then Hand Tig Welded in sections to ensure a constant balance in airflow, regulation in airspeed, positive seal and proper fittment. Each one of these intake systems are carefully tuned, by matching the engines displacement, air intake capacity and airspeed to the intake systems tube size,length and secondary pathway tubing diameters to maximize the full potential of the SECRET WEAPON INTAKE SYSTEM.

Priced at $266.90

Source [Amazon]

89-94 NISSAN 240SX Sealed Beam Super High Intensity 1157 LED Signal Bulb – 12 Red LED Dial 1157 Light Bulb parking light light bulb upgrade 89-94 NISSAN 240SX Sealed Beam Super High Intensity 1157 LED Signal Bulb – 12 Red LED Dial 1157 Light Bulb parking light light bulb upgrade

Product Features

Low power consumption

Easy to install and fit for most import and domestic vehicles

High Intensity LEDs in each light bulb

Super ultra bright color bulb

Product Description

NISSAN 240SX Sealed Beam parking light light bulb upgrade 89-94 Super Bright RED 1157 LED light bulbs OEM light Bulb with Build in 12 super LED. Twist in bulb-Double filament. Manufactory part no: 1157, 3496, 2057, 1142, 12499, 12594, P21/5W — Newest bulb upgrades for your car, truck or SUV – Super High Intensity 1157 Super Ultra Bright LED, automotive LED Light, car replacement bulb. (Multi-LED wide light source-designed automotive LED replacement light bulb for car.)With all the new technology coming out for the new vehicles on the market, LED lighting is one of the most exciting innovations. Automotive LED light produces more intense light. LED light travels faster and farther then any ordinary automotive light. Consume at least 10 times less power then regular bulbs and have a much longer life spends, which means you can save more money. Our new line of automotive LED light bulbs gives you all the benefits of LED lighting, which you cant get from regular light bulbs. Plus, this super ultra bright LED features a super solid red colour, this LED replacement bulb is the coolest red light you can get for your car on the market. 1157 LED Replacement Bulb, Turn Signal Bulb Replacement – 12 Super Ultra Bright RED LED Dial 1157 Light Bulb Features: Low power consumption 12V 0.5W A fit for most import and domestic vehicles Twelve high Intensity LEDs in each bulb Super Ultra Bright Red Color to match the rear stop, rear signal or brake lights Fit Manufacture part No. 1157, 3496, 2057, 1142, 12499, 12594 This automotive LED light upgrade car light bulb is the best fit to replace factory bulbs for brake lights, rear tail lights, side marker lights, front signal lights, rear signal lights, and reverse back up lights. For some vehicles with fast signaling or LED burnout problems, install one of the LED Load Resistors to solve the LED-signaling problem. parking light light bulb upgrade For 240SX Sealed Beam

Priced at $12.95

Source [Amazon]

A collaboration is always going to produce something spectacular and this Scion XD is definitely some sort of super car that looks as if it has been factory made, but of course, we all know what a Scion XD looks like before the work has been done.

This car has been built by Team Koshak and All Star, this was originally designed for the SEMA 2008 show, the most prominent thing about the car is the roof, or rather the lack of one. This is something really makes a car stand from the rest and the way that this has been done is for impact, which they have achieved.

The colour green features heavily on this car and even as you inside there is a splash of Samari Green greets you in the centre console. This colour is themed all around the car with touches of carefully placed paint to highlight the colour throughout the entire project.

SPECS Exterior:

Chopped top – made the car into a speedster / convertible: Chopped off the roof, a-b-c pillar from around the doors, rear deck lid and wing, Re-enforced the body with a custom 6pt Unique Fabrication roll cage

All metal bodywork (one off customization): Shaved door handles, Handmade steel side mirror mounts, One off all metal rear wing, One off all metal rear valance panel/boot, One off all metal rear logo panel with recessed emblem pocket, One off all metal rear panel lowered 1” lower then stock, Customized the window trim and a-pillar (slight curve for more aerodynamic look), Customized and capped off front and rear doors (no more side and rear windows), Capped off b-pillars, Capped off c-pillars, Custom front bumper grilles (4) powder coated black to match the roll cage, Customized fender wheels to accommodate 19×8.5” and 19×9.5” wheels

Accessories: Authentic C-west CF Mirrors sanded down, prepped, & painted green to match the body, Varad Vision under car lighting, 2008 Toyota IST front and rear emblems from Japan painted black to match the cage, Custom handmade fibreglass cowl panel (shaved wiper blade holes and shooters) painted black to match the cage

3-stage custom headlights and taillights: Headlights were taken apart and painted green to follow the bodylines, Headlights bezels equipped with Varad strobes lights, Headlights outfitted with latest version of the Ignited 8000k HID headlights (smaller lightweight ballasts), Taillights bezels equipped with Varad strobe lights

Prototype body kit (uniqueness of product and fit and finish): Prototype Extreme Dimension body kit designed by Jim Koshak, Prototype front bumper (corners refiberglassed for perfect fitment), Prototype side skirts, Prototype rear bumper (corners refiberglassed bumpers for perfect fitment (see photos)

Paint: Custom mixed PPG base coat and clear coat, Custom mixed PPG paint (Samari Green) applied by A&A Autoworks, Painted exterior, door jams, engine bay, wheel wells (black), trunk area, roll cage, interior pieces, grilles, springs, powder coated rotors, mirrors, emblems, and valve cover, Custom two-tone black and silver pin striping by world renowned pin stripper Jeff Styles

Engine: Modifications: Nitrous Express direct port system (50 shot) (carbon fibre solenoids and hard lined wiring, and steel braided lines), Custom Id-Tuning intake system (powder coated black) with individual port nitrous oxide injectors, Custom polished Autogear fuel rail, Custom Magnaflow exhaust system, Custom cold air intake with K&N filter, Custom K&N breather filter (with custom mounting bracket, powder coated black)

Accessories: Green colour matched valve cover, AEM oil cap, AEM battery box holder (powder coated black), NRG radiator cap, Wire tuck (please see photos), Allen-head bolts, Perrin silicone hoses, Kinetik Power batteries, Nitrous Express bottle opener

Uniqueness of Product and One-off Customization: Custom raised (4”) shock towers, Custom cowl, Custom Id-Tuning intake, Custom cold air intake, Custom breather intake, Custom NX set-up with hard lines and steel braided lines

Undercarriage: Paint and powder coat: Green colour matched TRD Springs (please see rear springs with mirrors), Black painted wheel wells, Black painted shocks, New wheel well fender trim, Powder coated Wilwood callipers

Suspension / Brakes: Suspension: Custom Unique Fabrication front suspension: 4” Raised Strut towers dropping the car by 4” (see photos under the engine bay), Custom Unique Fabrication rear suspension: Rear suspension lowered 4” with customized rear control arm and mounting brackets (see photos), TRD lowering springs painted green to match the car colour

Brakes: Front: Wilwood 4pistion callipers (powder coated silver), Steel braided brake lines, Autogear CNC custom 13” brake rotors and hats, Autogear allen head bolts, Custom Unique Fabrication mounting brackets for callipers

Rear: Removal of rear drums, Autogear CNC custom offset 13” 4 wheel disc brakes conversion with Wilwood callipers, Custom Unique Fabrication mounting brackets for callipers (see photos), Wilwood 2pistion callipers (powder coated silver), Steel braided brake lines, Custom e-brake set-up (e-brake works)

Wheels: Custom prototype 20-spoke 19×8.5” and 19×9.5” wheels, Painted gloss black faces, Painted gloss black inner and outer barrels, Custom green pin stripe on outer lips, Silver bolts, Custom made center caps, Centre cap pin striped with IST logo

Tires: Toyo Tires, 215/35/19 on a 19×8.5” wheel, 235/35/19 on a 19×9.5” wheel

Interior: Accessories: Varad Vision- lighting, Custom mounted Ignited Toggle and starter switches, Limited Edition Status Racing / Tjin Edition seats w/ Custom mini checker blue and green plaid upholstery, Unique Fabrication seat mounts, Shutt steering wheel, shift boot, and pedals, NRG steering, quick release, shift knob, and harnesses, NX bottle opener

Upholstery: Custom mini checker blue and green plaid upholstery, Front and rear door panels, Rear seats, Limited Edition Status Racing / Tjin Edition seats, Black suede outers on rear seats and racing seats, Customized stitching on rear seats and racing seats, Custom embroidered Status and Tjin Edition logos on racing seats

Uniqueness of Product and One-off Customization: Custom Unique Fabrication 6point roll cage with dimple dyes and harness bar painted solid black (chromoly material), Customized dash to fit around roll cage, Shaved window switch panels, painted green to match the rest of the interior, Status / Tjin Edition back or seats painted green to match the rest of the interior, Centre console bezel fibre glassed and painted to fit Shutt custom shift boot, Capped off a,b,c pillars

ICE: Accessories: Custom mounted Valor TV head-unit with DVD player (custom brackets), (2) ARC Audio Foose Edition amplifiers (1 for the mids and highs and one for the four 10” subwoofers), (4) 10” ARC Audio subwoofers, ARC Audio component speakers and tweeters, ARC Audio speak wiring, ARC Audio battery and fuse boxes, Custom mounted Scan Gauge on board computer system, Dynamat sound dampening padding

Installation: Custom audio enclosure under rear deck lid, Custom subwoofer boxes, Custom amp rack, Custom door panels with tweeters and mids and highs, Dynamat sound dampening padding installed behind custom enclosure

Sponsors: Unique Fabrication, Tuesday Afternoon, ID-Tuning, Tjin Edition, Turtle Wax, ICE, Mobil 1, Status Racing, Nitrous Express, Varad Vision, Ignited switches, Valor DVD, Arc Audio, Kinetik Power, Autogear, Toyo Tires, Extreme Dimensions, PPG Paint, A&A Autoworks, NRG, Shutt, TRD, Magnaflow, Perrin

Source [TunerZine]

12000K PURPLE SUPER PLASMA XENON HID H4 LOW BEAM SCION XD 08-08

Product Features

Simply the brightest bulb on the market without a ballast

Unconditional Lifetime Replacement Warranty

“Plug & Play Install, Uses existing OEM wiring”

“100% Safe for your wiring, will not melt your wiring or damage headlight housing”

DOT compliant & certified under 49USC30115 Standard 1588

Product Description

“These bulbs use the latest revolutionary Xenon gas technology The presence of Xenon gas in the halogen gas mix acts as a heat dissipater to allow the use of a hotter filament and there for get more lumens from the same wattage, as well as increasing the colour temperature of the light. We offer these bulbs in White Laser (6000K), Blue (8500K), and Purple (12000K).”

Priced at $19.99

Source [Amazon]

Scion xD 2008 Window Tint Kit

Product Features

“Rvinyl car window tint kits are precut specifically for the make, model and year listed in the prod

“This is a precut window tint kit, it is not simply a roll of window tint film. ”

Tint your vehicle’s windows at a fraction of the cost of tint shops.

Window Tint Film – 20% Dark Shade (Blocks 80% of Light)

“Our film when properly installed will not fade, lose colour, turn purple, or bubble.”

Product Description

“Rvinyl window tint kits are made from high quality tint film manufactured by Llumar. Our film when properly installed will not fade, lose colour, turn purple, or bubble. Precut tints are a cost effective way for the do-it-yourself installer to save time and money by taking the guess work out of the window tint installation process. Rvinyl car window tint kits are precut specifically for the make, model and year listed in the product name using advanced software and the most updated window tint pattern databases in the industry. We use professional grade equipment in the manufacturing of your film kit, allowing for a precision and professional results in half the time it would take you to install film by the roll. Although installing precut kits is significantly easier and less time consuming than installing film by the roll, it can still be a difficult process. Although many sites claim their kits are easy to install, we recommend you review the installation procedures outlined to make sure our product meets your needs. Installation difficulty depends on the ability of the installer, the particular windows being tinted and the compound surface of the rear windshield as it will require heat shrinking for proper installation. Front and rear windows are generally relatively easy to tint as they rarely require heat shrinking.”

Priced at $29.99

Source [Amazon]

A Nissan Sentra from 2002, is not the sort of car that you expect to find at a show or race day, but when it has been worked on to the extent that this one has, then it definitely deserves to right up there with all of the other winners and some seriously deserving runner ups too.

This is one hell of a beautiful looking machine that hardly resembles the car that it used to be, it has had so much work done on it that apart from the body shell there is probably nothing on there that is original. Yet this is a car of extremes, from what started off as an average car has finished up looking like something the mind of a mechanical genius.

What is amazing is the interior, this is like nothing that any production car is going have, in fact the interior of this car is like something out of this world, with black, red and silver taking over the inside of this machine. It is so fantastic inside that would not want to drive it for the fear of getting finger prints on some of those surfaces.

Engine Modification – Engine & Performance Qr25de 2.5L Mulitlayer Head gasket KMS Block Guard ARP Head studs Colder thermostat Killer Glass Pyrex race Hose Polished Turbonectics Hybrid T3/t4 Turbo ported Autoboost Turbo Manifold Custom protech-fabrications 3″ downpipe Protech-Fabrications 3″midpipe QTP 3″Y pipe Electric Exhaust Cut out VRS 3″catback exhaust MeganRacing carbonfiber muffler WTracing Fuel Rail 440cc precision Turbo Injectors Fuel Labs fuel filter Aeromotive fuel pressure regulator Walbrol 255lph Fuel Pump Nissport Oil Adapter Jim Wolf Technologies Balance Shaft Removal South West Autowerks Underdrive Pulley Cooling Mist methanol Injection Tial 38mm Wastegate Mishimoto Front Mount Intercooler Mishimoto Radiator Pushers fans

Engine Management – AEM FI/C Piggyback Zeitronix Wideband o2 Sensor Zeitronix Airfuel gauge Zeitronix datalogger Greddy Boost gauge Greddy profec B II boost controller Greddy Turbo Timer Greddy Oil temp gauge WTRacing Tune

Drivetrain Modification – ACT heavy duty Clutch 6 puck Stage 3

Suspension – Tein SS Suspension Macpherson Struts Nismo Strut Tower Brace Jimmy Bars 4 pt Lower tie bar

Wheels, Tires, Brakes – Motegi 17-inch lights BF Goodrich KDW 225/45 R17 Brembo Rotors Hawk Pads

Exterior Modification – Extreme Dimensions R33 front Bumper Vis Racing carbon Fiber hood Feelz Side Skirts Buddy club 2 rear bumper

Interior Modification – Custom Suede Bride Seats Suede A,b,c pillars suede dashboard Suede door panels Suede Headliner 2 stage red Crystal flake painted center dash and arm rest, lower pillars Custom painted Ichihahn Steering wheel Diamond Cut Floor Mats 4 pt Racing Harnesses Custom Audio Enclosure rear seat

I.C.E. – Pioneer 6.5 flip out TV Pioneer Dvd player Pioneer 6 disc Cd All Time color camera in trunk keyhole Full JBL component Speakers, 4 6×9 inch two way speakers 3 way 6.5s with crossovers and four tweeters JBL 15 inch GTO Subwoofer Alpine V12 5 Channel Amp Alpine 350 mono block class D Amp Optima Custom painted Battery

Sponsors – Wtuner.com Mishimoto.com

Source [Carbon8 Mag]

Injen RD1966BLK Cold Air Intake System 02-06 Nissan Sentra SER, Spec V (CARB 02-04 only) -L4 2.5L (Black Powder Coated)

Product Features

Built from 6061 T-6 Aluminum Alloy

All necessary Hardware included for easy installation

Completely bolt on, means no modifications required

Gains of up to 16hp/13ft.lbs of torque (on some models)

Limited lifetime warranty

Product Description

RD Series Race Division Intake Systems The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technology’s limited lifetime warranty. ***Images shown may or may not reflect actual vehicle stated and/or product size/Color*** *Do not attempt to install the intake system while the engine is hot* Replacement filter # X-1014.

Priced at $292.78

Source [Amazon]

Yellow Color 2003 Sentra SER Spec-V, coil-on-plug conversion / L4 Cylinder Ignition spark plug cable by Nology for NISSAN Sentra

Product Features

Quicker acceleration

Increased horsepower and torque

Higher top speed

Easier starting engine

Precise ignition timing and Increased fuel mileage

Product Description

Easy to add more horsepower and torque to your ride by this high performance spark plug wires. Now adding extra torque and horsepower to your NISSAN Sentra has never been easier! Simply replace your NISSAN Sentra spark plug wires with the newly improved Nology Hotwires. They are DYNO-proven to give you the extra horsepower and torque you?ve always craved. The secret of your Nology HotWires (NISSAN Sentra performance spark plug wires): They are the most technologically advanced ignition/spark plug wires available. HotWires are engineered with a special built-in capacitor that will create the most powerful spark possible – exclusive only to Hotwires. The result – This revolutionary design allows energy from your car’s ignition coil to accumulate in the capacitor until the voltage at the spark plug electrodes reaches the ionization point. At that split-second point the entire power of the stored spark is discharged at once, creating a spark 300 times more powerful. The result is faster, more complete combustion that increases the horsepower and torque to your NISSAN Sentra. Don’t settle for the ordinary. Replace your NISSAN Sentra spark plug wires with the Nology HotWires now and feel the difference! Order it now Nology ignition spark plug wires for NISSAN Sentra features: Quicker acceleration Increased horsepower and torque Higher top speed Easier starting engine Precise ignition timing Increased fuel mileage

Priced at $198.33

Source [Amazon]

Honda Civics used to be a favourite of either very young people or very old people, that was until the latest model came out and then the Honda Civic driver changed from those drivers to the more hip and trendy sort. However, when you of a Civic from 1994, normally the words cool and great would probably not feature, except in this case cool and great are minimum credits that we would give to this car owned by Jon Guadalupe aka “JonJon”.

There are two things that you notice here, the fantastic green colour that is a normal green colour that is used by Honda and the black top just ties it all together nicely. We must not forget the gold 16″ Mugen MF10 wheels and lightweight black lug nuts, all of these points make the machine a super machine, not just in looks but clearly in performance too.

SPECS 1994 Honda Civic Si

Exterior: Galapagos Green that is seen on the Honda Element, Midnight Black Pearl Roof, VIS double sided carbon fibre hood, Spoon Carbon duckbill, Password JDM amber corner lights, JDM bronze glass hatch, HOP slim side mouldings, HOP window visors, JDM parking sticker, emissions, tire pressure, gas decals

Interior: Bride Low Max carbon Kevlar seat, Bride rail, ITR floor mats, ITR dash, Mugen ITR cluster, FG360 steering wheel, pedal set, Takata 4 point harness, B&M short shifter, Miracle X-bar first generation, NRG quick hub release, Canadian air bag tray, Skunk2 shift knob, A’PEXi V-AFC, Fully colour matched interior

Motor: B18C block with Endyn Roller Wave pistons 11.5:1 compression ratio, Skunk2 cams with Pro cam gears, springs and retainers, ARP studs and bolts, JDM ITR 4-1 header heat wrapped, Blox intake manifold, Mugen Formula valve cover, Endyn oil catch canister, Password carbon CAI, Crane PS-92 ignition coil, MSD cap, NGK 8.5 spark plug wires, Mugen ECU

Transmission: 98 JDM ITR transmission with 4.7 Final drive, ACT clutch stage 2 with lightened flywheel, ITR master cylinder

Suspension/Wheels/Tires: 16″ Mugen MF10s (16×7) and Mugen ultra light lug nuts, Yokohama AVS 100s, Integra Type R suspension, Spoon 2 piston callipers, Nissin pads, Power Stop rotors, Skunk2 rear tie bar with Beaks kit, Custom front traction bars made by Fass Engineering

Source [Tunerzine]

Yellow OEM SPEC. Fog Light – Honda Civic SI 3-Door 2002-2005 (With Wiring Kit)

Product Features

OEM specification

Plug and play no modification

Wiring harness

On-off switch

Light bulbs included

Product Description

Fog functions in providing a wider beam pattern to illuminate below the normal line of sight to reduce reflected light. Good set of fog lights in your car helps you see better when driving in adverse weather conditions. Because great visibility is needed to achieve driving safety, equipping your vehicle with highly efficient fog lights is vital. Aside from being a functional component, fog lights also add to the aesthetic look of your car. The OR fog light can give your car the customized look and appeal that you want. As the part adorns the front edge of your vehicle, leaving much better and appealing impressions for your cars presence will be simple. Continually enjoy superior ride and driving experience with a stylish ride by employing quality fog lights. Cutting edge technology and engineering has been incorporated in the product design to enable it to offer reliable service life that lasts. Heavy duty materials are incorporated in the product that allows it to offer efficient performance for miles and miles of driving.

Priced at $77.36

Source [Amazon]

Honda Civic SI Chrome Mesh Grille Insert 02-05

Product Features

Brand New 1 piece grille

No Drilling or Fabrication needed to your vehicle

Mounting hardware included

Easy to Follow Instructions included

PRECUT for a quick installation

Product Description

This is a Brand New 1 piece chrome like plated mesh grille insert kit. This grill will fit all Honda Civic Si models from the 2002-2005. This mesh grille insert is for the upper grille. Note: This is not to replace your factory grille, it is simply an insert to change the current look of your car because this grille is simply an overlay. Therefore if you do not have the same front end as the picture this will not work. The mesh grille insert will attach straight on top of your factory grille using the provided wiring harness. The mesh has a diamond style pattern. This is very popular in the automotive scene. The mesh will not restrict airflow into your engine. The diamond mesh pattern has opens of 1/4″ by 3/8″. The mesh is a 20 gauge material meaning that it is strong yet it is also pliable making this a great product to work with. The mesh is a chrome ‘like’ mesh because it is not true chrome but is resembles it because of the shinny finish.

Priced at $12

Source [Amazon]

Before we start, I have to admit that this is one of my favourite cars, even before anything has been done to it this car is a super car that is totally awesome in almost every single way. In that case, this is a great car before it has been touched, but this one has been touched and therefore does that make it better? Of course it does no G35 fan would turn their back on a on a car like this.

The bodywork is great; in fact, it looks as if there has only been minimal amounts of work done on this car, such as a roof wing, side skirts and front bumper. One nice touch is the wing mirror covers, these have carbon fibre covers, but even better than that is the roof section, that has been made by hand from carbon fibre too.

This is car that almost looks like a prototype or even a concept car that you would see at a car show, but it is just the result of a well thought out plan, a lot of hard work and of course the one factor that ties all modified cars, a fair amount of cash!

Engine Modification

100 Shot NOS

Injen Intake

Motordyne ?Plenum Spacer

Stillen engine damper

HKS Hi-Power Exhaust

RE Short Shifter

Engine Management

Greddy Emanage Ultimate

Drive train Modification

JWT Clutch Flywheel

Chromoly Pivot Fork

Stainless Steel CLutch Line

Suspension

Tein CS coilover

Tein EDFC

Tein inner/outer tie rods

GT-Spec rear lower tie bar

GT-Spec rear lower mid brace

GT-Spec front lower tie bar

NRG front upper strut bar

Wheels, Tires, Brakes

OEM Brembo callipers w/ Axxis Ultimate pads

OEM Brembo rotors

SSR Professor MS-1 wheels (19×9+17 and 19×10.5+21)

General Exclaim tires (245/30/19 and 275/30/19)

Exterior

Top Secret front bumper

INGS+1 side skirts

INGS+1 rear apron

Seibon JS Style Carbon fiber hood

Mastergrade carbon fibber trunk

Carbon Craft carbon fibber mirror covers

Custom hand laid carbon fibber roof (not an overlay)

2006 Projector headlight upgrade

UTR2 roof wing

Jimmy Auto Body custom ice pearl red (Harold Rosado Book of Secrets)

Interior

Nismo Shift Knob

JDM Double Din Conversion

I.C.E.

Alpine IVA D200 multi media head units

Alpine IPod Hookup

JL Audio 1000/1 mono amp

JL Audio 300/4 4 channel amp

2 JL Audio 12W6V2

JL Audio Bass knob

Tsunami 1.5 Farad Cap

Optima Red Top Battery

Sponsors

None

Source [Carbon8 Mag]

G35 Coupe parking light INFINITI G35 Coupe light bulb upgrade by Led

Product Features

Low power consumption

Easy to install and fit for most import and domestic vehicles

High Intensity LEDs in each light bulb

Super ultra bright colour bulb

Product Description

2006 INFINITI G35 Coupe T11 High Intensity Blue LED Wedge Bulb – 6 LED Dial Wedge Bulbs parking light light bulb upgrade — INFINITI G35 Coupe parking light light bulb upgrade 2006 T11 Super Bright Blue LED Wedge bulbs OEM light Bulb with Build in 6 super LED. Manufactory part no: T10, T-10, 194, 168, 158, 12256, 12961, 2821, 2825, W5W / Twin LED Wedge Bulb Pack — Newest bulb upgrades for your car, truck or SUV – Super High Intensity 194 Wedge Super Ultra Bright LED, automotive LED Light, car replacement bulb. (Multi-LED wide-angle light source-designed automotive LED replacement light bulb for car.)With all the new technology coming out for the new vehicles on the market, LED lighting is one of the most exciting innovations. Automotive LED light produces more intense light. LED light travels faster and farther then any ordinary automotive light. Consume at least 20 times less power then regular bulbs and have a much longer life spends, which means you can save more money. Our new line of automotive LED light bulbs gives you all the benefits of LED lighting, which you cannot get from regular light bulbs. In addition, this super ultra bright LED features a super bright blue colour; this LED replacement bulb is the most solid blue colour light you can get for your car on the market. 194 Wedge LED Replacement Bulb, Push-in Wedge Type Bulb Replacement – 6 Super Ultra Bright Blue LED Dial 194 Wedge Bulb Features: Low power consumption: 12V 0.2W A fit for most import and domestic vehicles Six high Intensity LEDs in each wedge light bulb Super Ultra Bright Blue Colour to mix with the headlight or fog light Fit Manufacture part No. 194 , 168 , 158 , 12256 , 12961, W5W This automotive LED light upgrade car light bulb is the best fit to replace factory bulbs for brake lights, rear tail lights, side marker lights, front marker lights, dome lights, dash board lights and interior lights. For some vehicles with fast signal

Priced at $14.95

Source [Amazon]

New! Infiniti G35 Coupe Billet Aluminium Grille/Grill, Bumper, Polished 03-07

Product Description

This is a Brand New grille insert to custom fit your vehicle (not for Sport Package bumpers). Give your vehicle a new look and add instant value to your vehicle’s re-sale price. EASY TO INSTALL! These grilles install right in your factory bumper cover openings, and fasten to your existing plastic insert creating a new sleek look. This grille is made to last. Our grilles are built from 6063 T52 aircraft grade aluminium with 5/32″ thick crossbars and solid 1/2″ billets and then polished to a mirror finish using a 4 step polishing process. We ensure a perfect fit every time and a long service life and lasting durability against the elements that corrode and destroy the other grilles on the market.

Features:

Highly Polished: Never needs polishing

Four step polishing process offers mirror-like finish

5/32″ Thick crossbars

Solid 1/2″ billets

No unsightly weld or splatter marks

Installation hardware and instructions included

Installs in minutes Applications:

Infiniti

G35, 03-07

Priced at $42.75

Source [Amazon]