Looking at the images it is hard to decide what is better, the car or facilities that the owner Tim Heineman has to produce a fantastic looking machine such as this Nissan 240SX. Ordinarily these cars are hot, but as this car stands, it is a superb version of the car and that probably has something to with all of the work that has gone into.
On the outside, there are only a few touches that change the original shape, which is great because the car then is looking like it should, but inside there has a few changes that would make the original version look dated. First up there are seat rails and a full roll cage, these are essentials, but no heater or air con!
This is a proper race car, that has been thought out carefully and worked on with the same vigilance, even down to keeping the cool, the set means that it never exceeds 190 while racing, all these factors make this car something special, a real racing machine.
Specs of the Nissan 240SX:
Engine Modification – Engine/ Fuel RB25 / custom racefab motor and tranny mounts Wiring by racefab 2qt Accusump Kakimoto racing ecu tune r33 maf stock Vmounted (racefab set up) Intake manifold (racefab) 3in intercooler pipe (racefab) 3in intake (racefab) Catch can (racefab) Intercooler 18 x 6.5 x 3.5in core (racefab) Radiator custom 2pass ( never gets over 180 to 190 racing) with new crash bar (racefab) Motorcycle batt . 3/8 bolts tie down 3in downpipe (racefab) Air Separator Tank (racefab) Perrin coolent catch can Aeromotive Performance Electric Fuel Pump 2 inline Aeromotive A/N filters Full A/N fuel lines from tank to fuel injectors A/N fuel gauge
Drivetrain Modification – New custom drive shaft (chevy replaceable joints) rear sOlId bushings plated & Welded diff steering quickener (A Prolite 2:1) new nismo bushings for steering rack ajustabile Rear Upper Camber Arms Adjustable FRONT SUPER TENSION RODS steering angle kit 50deg racefab
Wheels, Tires, Brakes – 18in rims 57 Maximum’s new rota p45r new have 4 225/40/18 tires Lug Nut – Blue
Exterior Modification – Body Jspec.com hood vent cw westin wing origen style body kit rolled rear fenders rolled front fenders stock headlight wiring put into engine bay ( and made wheel skid plate ) new nismo bushings for steering rack wheel tubbed front
Interior Modification – sparko seat rail pass side custom seat rail driver side racefab old momo seats gforce seatbelts 4 point deep dish steering wheel quick disconnect steering wheel full roll cage 1.5in tube D.O.M seam-welded No heater/AC
Source [Carbon8 Mag]
Nissan 240sx 5 lug [94-98] Rear Cross Drilled Slotted Brake Rotors- Made by iROTORS
Product Features
1994-1998 Nissan 240sx 5 lug
This order is for a set of [2] rear iROTORS XDS Series Performance Brake Rotors
Got questions? Call us toll free at 888-8ROTORS!!!
Product Description
iROTORS’ XDS Series rotor line combines performance and proven durability with brilliant visual impact. The iROTORS mission is to provide an affordable solution to the brake challenges that drivers face today.
Cross drilled and slotted rotors are engineered to provide maximum heat dissipation for dependable and safe braking under extreme braking conditions. The combination of the cross drilled holes and slots enables the braking surface to be cleaner thus providing improved friction bite under wet and dry conditions. Each rotor is coated with a silver, shiny military spec zinc dichromate finish to prevent corrosion and maintain the new rotor look.
All iROTORS XDS Series cross drilled and slotted brake rotors can be used with the original braking system through simple bolt-on methods.
Smoother stops
Reduced vibration
Application specific castings
Priced at $119.99
Source [Amazon]
Nissan 240SX 1995 – 1998 Vivid Blue Dash Kit
Product Features
This vinyl dash kit includes all the self-adhesive pieces as shown in a Vivid Blue.
The dash kit can be removed without damaging your vehicle’s interior.
It is perfect for leased vehicles as it is a non-permanent and non-damaging to your vehicle’s dash.
The material is soft and flexible allowing it to conform to the contours and blend seamlessly.
“Thin, self-adhesive, vinyl film with a Vivid Blue finish.”
Product Description
“Rvinyl Dash Kits are manufactured from a professional grade, 6-year rated automotive vinyl film. Rvinyl uses a 3 mil thick, vinyl that is available in a wide variety of high gloss colors and finishes to complement your vehicles interior. It is coated with a semi-permanent pressure sensitive adhesive which allows for its application on your vehicles dash, but still allows you to remove the dash kit without damaging your cars interior. The Vinyl film is precut to the specifications of your vehicles make, model and year (as listed and illustrated in the product diagram). It is designed to accent your vehicles dash. The dash kit solely accents the interior; it is not designed to fully cover the cars trim paneling. What are the vinyl dash trim kits physical properties? Thickness of film plus adhesive: .0042″” (0.010668cm) Application temperature: 50°F to 104°F (10°C – 40°C) Rvinyl recommends an application temperature of 70-80°F (21° -26°) End Use temperature after application: -5°F to 194°F (-20°C – 90°C)”
Priced at $35.99
Source [Amazon]
