This is a great car from the past circa 1985, which makes it around twenty five years old and still looking cool, as ever, in fact, as this can be classed as a classic car it actually appears to be looking better than some newer cars, not to mention all of those Toyotas that suffered the recent total recall!
This Toyota is a modified car, not that you can notice much from the outside as the body is almost identical as it would have been when the cars was born twenty five years ago. The only major difference visible to the eye seems to be the wheels.
Under the hood, there have been some significant changes, such as the high pressure oil pump and a race block installed, just to add some extra power as and when needed. Basically this is what import building is all about, taking a car and making it real, this certainly falls under that category.
Features of the modified 1985 Toyota AE86 Trueno:
ENGINE MODIFICATIONS – 16v 4age 7-rib race block with full trd gasket kit trd high compression head gasket, 20v4age high pressure oil pump, s/p sir civic simi forged pistons with trd s/p rods 3 way valve cut to sit in massive port polished and flowed head with trd valve
TRANSMISSION MODIFICATIONS – 1984 w55 Celica rear wheel drive box. Toyota hi-lux 4.3 lsd with machined down drive shafts installed in a Toyota town ace housing
SUSPENSION MODIFICATIONS – front/ trd shocks in adjustable kyb coil over with dobi springs. rear/dobi coil springs with custom shortened hq holden kyb shocks
ALLOY WHEELS – race 14/8 deep dish super lights and 14/7 rays engineering for street
TYRES – front 205/60/14 rear 195/60/14
BRAKES – r32 skyline front rotors and callipers. Rear just changed to a vented brembo rotor stock calliper
EXTERIOR MODIFICATIONS – stock looking just removed doors strips. Fibre glass bonnet, guards and sun roof painted to look stealth. Naked police women sticker on rear window.
INTERIOR MODIFICATIONS – Cusco strut brace
IN CAR ENTERTAINMENT – valentine 1 radar. Highly recommended to every 1
Source [Modified Cars]
Toyota Celica Supra Hood 1982-84 Lift Supports
Product Features of the Hood 1982-84 Lift Supports:
Original equipment lifts support replacements
Easy installation instructions on every package
Application specific to fit each vehicle perfectly
Attach easily with existing mounts and hardware
Meets or exceeds oem requirement
AVM is indisputably the number one provider of gas springs and lift supports to the automotive aftermarket. Our StrongArm and MightyLift brands are of the highest quality and lowest cost of any published gas spring in the automotive aftermarket. Manufacture for perfect fit on all vehicle type for the hood, hatch, glass and trunk for any vehicle. Each support is specifically designed for a specific vehicle. Lift time warranty.
List Price: $99.99
Price: $65.99
You Save: $34.00 (34%)
Source [Amazon]
1983-1987 Toyota Corolla Levin/Trueno Seatbelt/Seat Belt Harness Bar BK
Product Features of the Trueno Seatbelt/Seat Belt Harness Bar BK:
Direct bolt-on design requires little or no modification for fitment
Made of lightweight steel
Black colour finish
Provides an attachment point for racing seatbelts
Helps stabilize the vehicle by providing support to vehicle chassis
Steel Harness Bar. Condition of the product is BRAND NEW. This product has a confirmed application of 1983-1987 Toyota Corolla Levin/Trueno. This product has the following features: Made of lightweight steel, Black colour finish [minor scratches may be present on the surface as the paint coat is thin], Provides an attachment point for racing seatbelts with seatbelt loop, Helps stabilize the vehicle by providing support to vehicle chassis [harness bar ends may be manufactured slightly twisted/warped], Improves turn situation, Compatible with stock and aftermarket seats / seatbelts. Notes for installations: May require removing belt covers at each side of the chassis to mount bar and/or support rods. May require reversing one or both ends on the harness bar to sit properly/flush. Use of bar in coupe may render backseat unusable or inconvenient to passengers. Any car-specific comments made in red next to application. Will not work with models that have automatic seatbelts. Dimensions: Length of harness bar (overall / adjustable hole-to-hole) = 50″ / 47″-52.5″. Length of support rod (adjustable hole-to-hole) = 27.5″-28.5″. Weight of harness bar / support rod = 6 LBS / 3 LBS. Depth of harness bar (overall) = 13.5″. Diameter of harness bar (hollow) = 2.5″. What’s in the box: Steel harness bar, 2 support rods, Nuts, washers, and bolts [thread pattern on supplied bolts may not match vehicles, may need to source locally].
Priced at $140
Source [Amazon]
