The MR2 is one of the coolest Toyotas around even with all of the issues that Toyota has the moment with the biggest product recall in the history of the car industry the MR2 rises up over all of this. This model is in fact the 1992 version, to some people it would be best one made and we would have to agree.
The car has been almost modified to death in the body department, with almost all of the exterior being transformed with some sort of panel or modification. This trend follows throughout the car with a decent nitrous unit and turbo being installed just to add that little bit of boost that makes so much difference.
Just a quick mention on the interior, it looks as if the whole interior has been covered with a suede effect type material and this is the sort of covering that would have been seen in a high performance car from the 1980’s!
Features of the 1992 Toyota MR2 Turbo:
Engine: Toyota 2.0L DOHC Turbocharged Inline 4
Engine Modifications: HKS: (suction pipe, gas pipe, heat shield, turbo cover, piping, bracket, valve cover, Super Sequential blow off valve, cams); GReddy: (intercooler, turbo piping, hoses, oil cooler, oil catch can); one off custom titanium exhaust system, Nology wires, engine bay rewrapped in carbon fibre, miscellaneous chrome parts, NX nitrous system
Engine Management: GReddy e-Manage, APEXi AVC-R boost controller
Drive train Modifications: HKS twin plate clutch, TRD LSD
Suspension: one off APEXi N1 damper with Swift Springs, one off stabilizer links, chrome and pillow balls for links, TRD strut bar
Wheels, Tires, Brakes: (fr) 18×7.5-inch Volk Racing SF-Challenge in gold with 215/40/18 Dunlop FM901 tires, Brembo 2 piece callipers with 8 titanium pistons callipers, Project mU rotors; (r) 18×9.5-inch Volk Racing SF-Challenge in gold with 225/40/18 Dunlop FM901 tires, Brembo rear brake kit with Project mU rotors; brake lines rerouted for ABS removal with Hurst line lock
Chassis, Body: custom one piece front end consisting of: USDM turn signals, Bomex bumper, 5cm wide fenders and Nissan Cima F50 headlights; carbon flaps, side skirts and fenders moulded together, rear blister fender wide bodied and moulded, JGTC style rear bumper, one off rear diffuser, JGTC trunk built to house genuine Nismo Hoshino dry carbon fibre wing, Bomex: (rear engine lid, air duct); rear tire housing wrapped in carbon fibre, front one piece equipped with air cylinders to raise front end with timer relay, custom BASF paint
I.C.E.: Carrozzeria H9 head unit / navigation, two Phoenix Gold amplifiers, Focal Utopia speakers, JL Audio subwoofers
Interior Modifications: Bride seats, Takata harnesses, Ractive shift knob, Ignited switches, TRD: (short shifter, steering wheel); Pivot: (oil temperature, water temperature, speedometer, tachometer gauges, boost); entire interior reupholstered in Alcantara fabric
Numbers: Not available
Sponsors: Rays Engineering, Bomex, Pivot, Ignited, BASF, JL Audio
Source [Tunerzine]
Stainless Steel Exhaust Manifold Header
Product Features
OEM specification
Stainless steel
Mandrel bend tubing
Gaskets to the block and hardware
NO CARB exempt sticker
Product Description – Add power, torque and aggressive sound to your car / truck with a set of BP Headers. BP uses the latest in race exhaust technology and engineering to manufacture exceptional quality stainless steel headers that provide maximum exhaust flow and efficiency. The BP headers are also made to last; constructed from T-304 stainless steel the highest grade of stainless steel for building an exhaust system.
Priced at $113.36
Source [Amazon]
Toyota MR-2 2.2L OE Clutch Kit
Product Features – 1991 – 1992 Toyota MR – 2 2.2L 4 Cylinder 2200cc 5SFE Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Alignment Tool This is a new Phoenix Friction Products brand clutch kit. All components are sourced from one or more OE Manufacturers such as Aisin, Daikin/Exedy, Luk, Sachs, Valeo, or ourselves, and carry the same 12 month, 12,000 mile warranty.
This is a new Phoenix Friction Products brand clutch kit with components sourced from one or more OE Manufacturers such as Aisin, Daikin/Exedy, Luk, Sachs, Valeo, or ourselves. The OE pressure plate and woven organic disc is ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new. This is a direct OE replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch. Phoenix Products is a 25 year OE and performance supplier and manufacture of clutch and friction products. We only offer the highest quality OE and Performance components from the best OE and performance manufacturers, including ourselves. If you have any questions either before or after the sale, we will be happy to answer your email or take your call. For more information about us, please feel free to read our about us page.
Priced at $119.09
Source [Amazon]
